Suspension

Alfaholics Fast Road Suspension Kit

Alfaholics Fast Road Suspension Kit

£450.00 GBP (ex vat)

SUS301/B

We have developed suspension kits for fast road use suitable for all 105 series cars: comprising 4 lowered and uprated springs and a 29mm anti-roll bar. When combined with either Bilstein or Koni shock absorbers, it radically transforms the handling of the car and the way it turns into corners. We recommend the removal of the rear anti-roll bar and replacing certain bushes with the polyurethane equivalent. Comprehensive advice on fitting, ride heights etc., is given on purchase of the kit. 3 different ride height kits are available to ensure the kit is tailored to your individual specific requirements and usages (Kit A, Kit B or Kit C). Kit A is our standard ride height kit for Giulia saloon or rough rally spec increased ride height for GT, Kit B lowers GT/Spider 1″ from standard (making a Giulia 2-2.5″ lower) and Kit C lowers a GT/Spider 2-2.5″. All Alfaholics springs are manufactured from the best quality EN48 steel.

“Indeed a very good suspension kit for fast road , very comfy , straight forward to install, very good support from Max and Richard for the set up” Bruno Manfredini

“The Alfaholics springs with Koni yellow sport shocks are a revelation. The car’s stance is very stable with negligible body roll. But it’s still supple enough to handle bumps without complaint. Frankly, the ride is very comparable to a BMW M series or M-B AMG. No wonder this car was so well respected in the 60′s, it’s even pretty great today!” Carl Liebold

Alfaholics Trackday/Mild Race ‘Blue’ Handing Kit

Alfaholics Trackday/Mild Race ‘Blue’ Handing Kit

£530.00 GBP (ex vat)

SUS301/1

Kit Includes

  • 4 lowered and uprated springs
  • 29mm anti-roll bar with ball-jointed
  • ‘S4 style’ droplinks

Details

Developed around Max’s GTA-R and our 2.0 Sprint GT race car, this kit is suitable for all focused trackday and mild race 105 Series cars.

‘S4 style’ droplinks which are far superior to the standard rubber bush droplinks of the normal 105 series cars. When combined with either Bilstein or Koni shock absorbers, it radically transforms the handling of the car; the car has very positive turn in to corners, excellent grip and balance and superb directional stability.

We recommend the removal of the rear anti-roll bar and replacing certain bushes with the polyurethane equivalent when installing this kit. Comprehensive advice on fitting, ride heights etc, is given on purchase of the kit.

Alfaholics springs are manufactured from the best quality EN48 steel.

Alfaholics Fast Road Suspension Rebuild Package Stage 1

Alfaholics Fast Road Suspension Rebuild Package Stage 1

£1,430.00 GBP (ex vat)

GTA-R 10 | GTA-R 10C

Building on the fantastic success of our Fast Road Suspension Kits, we can now offer this complete package containing all the parts you’ll need to rebuild your suspension and uprate it at the same time. Ideal if you are rebuilding a car!

The package consists of-

  • Alfaholics Fast Road Suspension Kit
  • Four Koni Sport Dampers
  • Complete set of bushes (upgraded where we recommend that you do this) and ball joints including a set of track rod ends
  • New bump stops front and rear and new axle straps

Because the package is based around the Alfaholics Fast Road handling kit, we are able to offer the same ride height options as we can for that setup so please let us know when ordering how high (or low!) you’d like the car to be.

Alfaholics Fast Road Suspension Rebuild Package Stage 2

Alfaholics Fast Road Suspension Rebuild Package Stage 2

£2,625.00 GBP (ex vat)

GTA-R 8

This stage 2 upgrade to the above Fast Road Suspension Package is for the driver who is looking for take their car to the next level. This is a fast road suspension package that will hold its own at trackday events as well! As fitted to Richard Banks’ Giulia Sprint GT Veloce.

The kit includes:-

  • Alfaholics Fast Road Suspension Rebuild Package
  • Upgrades to S4-type front bar with stronger drop links and 2.25 inch springs for lower unsprung weight and easy spring rate changes
  • Lightweight front spring pans
  • GTA-type adjustable top suspension arms for easy camber adjustment.
  • Alfaholics quick steering arms
  • Upgrade to high quality Lemforder track rod ends
  • Alfaholics aluminium rear T-bar with poly centre bushes
Alfaholics Fast Road/Race Suspension Rebuild Package Stage 3

Alfaholics Fast Road/Race Suspension Rebuild Package Stage 3

£3,465.00 GBP (ex vat)

GTA-R 8/3

The Stage 3 upgrade to the above Fast Road Suspension Package adds further refinements to the Stage 2 and Race Packages.

Conventional bottom balljoints and track rod ends are upgraded to the Alfaholics Geometry Pack and Rose Jointed steering arms for better camber control and much improved turn-in and weight saving. The rear T-bar is upgraded to the Race version with centre Uniball and a set of Alfaholics Lightweight trailing arms are included to further reduce unsprung weight.

Kit highlights-

  • Alfaholics Fast Road Suspension Rebuild Package
  • Upgrades to S4-type front bar with stronger drop links and 2.25 inch springs for lower unsprung weight and easy spring rate changes
  • Lightweight front spring pans and rear trailing arms
  • GTA-type adjustable top suspension arms for easy camber adjustment.
  • Alfaholics quick steering arms
  • Rose jointed steering arms and front suspension geometry upgrade package
  • Alfaholics aluminium rear T-bar with uniball
Front Springs Standard

Front Springs Standard

£65.00 GBP (ex vat)

SUS101

Alfaholics production-standard rate/length front springs.

Front Spring Pan - Shallow

Front Spring Pan – Shallow

£30.00 GBP (ex vat)

SUS102S

Shallow front spring pan – always for the drivers side.

Front Spring Pan - Deep

Front Spring Pan – Deep

£30.00 GBP (ex vat)

SUS102D

Deep spring pan – Always for passenger side.

Alfaholics Lightweight Spring Pan

Alfaholics Lightweight Spring Pan

£82.50 – £165.00 GBP (ex vat)

SUS102/1 | SUS102/P

Key Details

  • Alfaholics production.
  • Lightening holes are laser cut for improved accuracy and consistency.
  • Lower pan holes swage-punched to increase the strength and rigidity beyond that of a standard pan.
  • Finished in high quality black powder coating.

Details

We recommend combining these pans with our FIA 2 1/4″ front spring conversion for maximum weight saving – 7.2KG total with this combination.

They are pre-drilled to take our FIA 2 1/4″ conversion.

Spring Removal Tool

Spring Removal Tool

£28.00 GBP (ex vat)

SUS306

Make your life easier with the Alfaholics front spring removal toolset. Remove one spring pan bolt and replace it with the threaded rod and tighten up. Repeat the process until the bolts are all replaced by the threaded rods 

Front Spring Pan Lowering Kit - Alfaholics Product

Front Spring Pan Lowering Kit – Alfaholics Product

£22.50 GBP (ex vat)

SUS103

Long bolts for spring pan & longer adaptor pin for droplink. Allows you to fit up to 10mm of shims between Spring land and wishbone arm to lower the front ride height up to 20mm due to 2:1 ratio. 

Front Spring Pan/Drop Link Double-Ended Bolt

Front Spring Pan/Drop Link Double-Ended Bolt

£12.00 GBP (ex vat)

SUS203/2

Stainless steel front spring pan / drop link double ended bolt.

Anti-Roll Bar Drop Link Pin

Anti-Roll Bar Drop Link Pin

£20.00 GBP (ex vat)

SUS103/1

Front Anti-Rollbar Mounting Bracket

Front Anti-Rollbar Mounting Bracket

£7.75 GBP (ex vat)

SUS132/1

Front anti rollbar mounting bracket – clamps bar to chassis.

Front Spring Metal Seat

Front Spring Metal Seat

£5.95 GBP (ex vat)

SUS104

Front spring metal seat to protect spring rubber from spring – Four per car.

Front Spring Rubber

Front Spring Rubber

£4.95 GBP (ex vat)

SUS105

Front spring rubber seat – four per car

6mm Front Spacer

6mm Front Spacer

£14.00 GBP (ex vat)

SUS106

Note 2:1 ratio so lifts car 14mm

10mm Front Spacer

10mm Front Spacer

£18.00 GBP (ex vat)

SUS107

Note 2:1 ratio so lifts car 20mm.

Koni Classic - Front Shock Absorber

Koni Classic – Front Shock Absorber

£80.00 GBP (ex vat)

SUS108

Adjustable Koni classic shock absorber for standard suspension. Priced per shock absorber, we recommend replacing both.

Koni Sport Front Shock Absorber

Koni Sport Front Shock Absorber

£82.00 GBP (ex vat)

SUS109

Koni Sport adjustable front shock absorber. We recommended using these sport shock absorbers in combination with our fast road handling kits. Price is per shock absorber, we strongly advise replacing them as a pair.

Bilstein Front Shock Absorber

Bilstein Front Shock Absorber

£68.00 GBP (ex vat)

SUS110

Gas shock absorber for trackday and competition cars. If you are looking for adjustable race quality dampers, see our Adjustable Race Dampers under Race & Performance Parts.

Front Shock Absorber Upper Bush - Polyurethane

Front Shock Absorber Upper Bush – Polyurethane

£11.50 GBP (ex vat)

SUS111

These specially formulated, high-quality rear shock absorber bushes have been designed for better stability, handling, and control in on-road, off-road, and race track applications.

This set includes four bushes for both front dampers.

Front Shock Absorber Lower Bush - Polyurethane

Front Shock Absorber Lower Bush – Polyurethane

£9.50 GBP (ex vat)

SUS112

Front shock absorber lower bush in polyurethane. Priced per pair for 1 car.

Top Suspension Arm

Top Suspension Arm

£48.00 – £96.00 GBP (ex vat)

SUS113L | SUS113R | SUS113

Standard non-adjustable version. Please select left or right hand arm.

GTA Type Adjustable Top Arm

GTA Type Adjustable Top Arm

£85.00 – £170.00 GBP (ex vat)

SUS117L | SUS117R | SUS117

Reproduction of Autodelta’s adjustable camber top suspension arm. The threaded adjuster means you can change the length of the arm and that in turn changes the camber angle of the front wheel. We recommend polyurethane bushes are bought to install into these arms in place of the standard rubber bushes.

Top Arm Inner Bush

Top Arm Inner Bush

£4.75 GBP (ex vat)

SUS119

Standard top arm inner bush to suit all 105 models.

Top Arm Inner Bush - Polyurethane

Top Arm Inner Bush – Polyurethane

£23.90 GBP (ex vat)

SUS120

Two required per car – Ideal for fast road and track day cars, for extreme track cars use bottom wishbone bushes for this fitment instead. Priced per pair.

Castor Arm Ball Joint

Castor Arm Ball Joint

£18.00 GBP (ex vat)

SUS121

Castor arm ball joint to fit all 105 Series Coupes, Saloons, Spiders and Montreals. 

Complete Castor Arm

Complete Castor Arm

£90.00 GBP (ex vat)

SUS-105-CCA

Alfaholics production complete castor arm to suit all 105 series cars. Complete with lock nuts, castor arm ball joint, and a billet castor arm clevis.

Castor Arm Tube

Castor Arm Tube

£18.95 GBP (ex vat)

SUS123/2

Powder-coated castor arm tube to suit all 105 series Alfa Romeos.

Castor Arm Lock Nut

Castor Arm Lock Nut

£1.95 GBP (ex vat)

SUS-105-CLN

Castor arm lock nut to suit all 105 series cars.

Castor Arm Clevis

Castor Arm Clevis

£55.00 GBP (ex vat)

SUS-105-CAC

Alfaholics production castor arm clevis to suit all 105 series cars. Machined from billet.

Castor Arm/Carburettor Stay Bush

Castor Arm/Carburettor Stay Bush

£5.95 GBP (ex vat)

SUS122

Carburettor stay bush – fits into the bottom of the carb support arm where it fits into the engine mounting.

Caster Arm Bush Plastic Insert

Caster Arm Bush Plastic Insert

£2.95 GBP (ex vat)

SUS122/1

To be fitted where the castor arm attaches to the top arm of the front suspension.

Castor Arm Bush - Polyurethane

Castor Arm Bush – Polyurethane

£22.00 GBP (ex vat)

SUS123

Polyurethane castor arm bush. Two required per car – Recommended for fast road and trackday. Sold as Pair.

Front Lower Bump Stop  62-68

Front Lower Bump Stop 62-68

£48.00 GBP (ex vat)

SUS140

Front lower bump stop set for early cars from 62-68. To suit sprint GT, GTC 1600 GTA.

Front Bump Stop Upper

Front Bump Stop Upper

£4.50 GBP (ex vat)

SUS139

Front bump stop upper sits under top arm, two required per car, sold individually.

Front Bump Stop Lower

Front Bump Stop Lower

£9.50 GBP (ex vat)

SUS138

Front bump stop lower screws in under the cross member, two required per car, sold individually.

Bottom Wishbone Bush/Early Top Arm Inner bush

Bottom Wishbone Bush/Early Top Arm Inner bush

£25.50 GBP (ex vat)

SUS126A

Reproduction lower wishbone bush, four per car. Also used as top arm inner bush on 1st series cars, 2 per car and recommended as top arm inner bush for race applications, 2 per car.

Bottom Wishbone Bush Tab Washer

Bottom Wishbone Bush Tab Washer

£2.95 GBP (ex vat)

SUS127/1

Lock tab for the bottom wishbone bush nut, four per car.

Wishbone Bush End Cap

Wishbone Bush End Cap

£3.75 GBP (ex vat)

SUS127

For all cars with 4 bolt fixing for wishbone to engine cross member- four per car.

Bottom Ball Joint

Bottom Ball Joint

£19.50 GBP (ex vat)

SUS124

Front suspension bottom ball joint to fit all 105 Series Coupes, Saloons, Spiders and Montreals

Front Anti-roll Bar Drop Link

Front Anti-roll Bar Drop Link

£18.00 GBP (ex vat)

SUS128

Front anti-roll bar drop link including bushes. Connects anti-roll bar to spring pan. A straight style that suits all cars from around 1968 to 1986. Two required per car.

S4 Front Anti Rollbar Drop Link

S4 Front Anti Rollbar Drop Link

£22.00 – £44.00 GBP (ex vat)

SUS128/1L | SUS128/1R | SUS128/1P

Some late S3 and all S4 Spider – Ball joint version.

S4 Drop Link Adaptor

S4 Drop Link Adaptor

£18.00 GBP (ex vat)

SUS128/2

Adaptor piece to connect S4 ball joint drop link to spring pan/wishbone assembly. Stainless steel.

Front Anti-roll Bar Drop Link Bush - Late

Front Anti-roll Bar Drop Link Bush – Late

£6.25 GBP (ex vat)

SUS129

30mm O.D – correct for original 105/115 series drop links for cars from 1968-85 -four per car.

Front Anti Roll Bar Bush Upper - Early

Front Anti Roll Bar Bush Upper – Early

£2.50 GBP (ex vat)

SUS130

For early style anti roll bar drop link 1964-67 – Two per car.

Front Anti Rollbar Bush Early - Lower

Front Anti Rollbar Bush Early – Lower

£6.95 GBP (ex vat)

SUS131/1

Set of 4

Front Anti-roll Bar Rubber

Front Anti-roll Bar Rubber

£2.50 GBP (ex vat)

SUS132

Front Anti-roll Bar Rubber to suit the standard 24mm anti roll bar – Two per car

Front Anti-roll Bar Rubber - Polyurethane

Front Anti-roll Bar Rubber – Polyurethane

£8.00 GBP (ex vat)

SUS133

Front anti-roll bar rubber in polyurethane to suit the standard 24mm anti roll bar, 2 required per car, sold as a pair.

Front Anti-roll Bar Rubber - 29mm Polyurethane

Front Anti-roll Bar Rubber – 29mm Polyurethane

£9.95 GBP (ex vat)

SUS134

Front anti-roll bar rubber in polyurethane to suit our 29mm anti-roll bars- two per car, sold as a pair.

Alfaholics Front Anti-roll Bar

Alfaholics Front Anti-roll Bar

£210.00 GBP (ex vat)

SUS302

Alfaholics 29mm front anti-roll bar with polyurethane mountings and end fittings.

Alfaholics 29mm Blade Bar

Alfaholics 29mm Blade Bar

£235.00 GBP (ex vat)

SUS303

Alfaholics 29mm front anti-roll bar for S4 Spider or for fast road application, complete with 29mm poly bushes. This allows usage of S4 Spider ball-joint drop links which are far more durable than standard rubber bush drop links.

Front Wheel Bearing Kit - Premium

Front Wheel Bearing Kit – Premium

£40.00 GBP (ex vat)

SUS135/1

The outer front wheel bearing on 105 series cars is very small in design for its job. It is exposed to extreme temperatures and forces and usually needs re-packing every race. Until now, the wheel bearings available have not been good enough quality to last more than a couple of races.

These premium branded kits, sourced by Alfaholics, are extremely high quality, thereby increasing the life of the bearings under race & track day conditions.

Kit includes one premium quality inner bearing, one premium quality outer bearing and a dust seal.

As used in the Alfaholics GTA-R builds.

Rear Spring – Standard – Alfaholics Production

Rear Spring – Standard – Alfaholics Production

£65.00 GBP (ex vat)

SUS201

For GT. Can be fitted to other cars but may need spacers. Not suitable for 1750/2000 Berlina or late S3 and S4 Spiders.

12mm Aluminium Rear Spring Spacer

12mm Aluminium Rear Spring Spacer

£35.95 GBP (ex vat)

SUS202

Alfaholics production 12mm Aluminium rear spring spacer CNC machined-raises car 15mm approx.

10mm Rear Spacer

10mm Rear Spacer

£12.95 GBP (ex vat)

SUS202/1

10mm spacer to fit inside rear spacer above to give an extra 10mm height

Rear Spring Rubber Seat

Rear Spring Rubber Seat

£5.50 GBP (ex vat)

SUS203

Rear spring rubber seat to suit all 105 models. Fits on top of rear spring, two required per car, priced individually.

Rear Spring Metal Seat

Rear Spring Metal Seat

£11.95 GBP (ex vat)

SUS203/1

Correct rear spring metal seat to fit between spring and spring rubber when a rear spring spacer is not used. Two per car, sold individually.

Koni Classic - Rear Shock Absorber

Koni Classic – Rear Shock Absorber

£80.00 GBP (ex vat)

SUS204

Adjustable Koni classic shock absorber for standard suspension. Priced per shock absorber, we recommend replacing both.

Koni Sport Rear Shock Absorber

Koni Sport Rear Shock Absorber

£82.00 GBP (ex vat)

SUS205

Koni Sport adjustable rear shock absorber. We recommended using these sport shock absorbers in combination with our fast road handling kits. Price is per shock absorber, we strongly advise replacing them as a pair.

Bilstein Rear Shock Absorber

Bilstein Rear Shock Absorber

£68.00 GBP (ex vat)

SUS206

Gas shock absorber for track day and competition cars. If you are looking for adjustable race quality dampers, see our Adjustable Race Dampers under Race & Performance Parts.

Rear Shock Absorber Bush – Polyurethane

Rear Shock Absorber Bush – Polyurethane

£23.00 GBP (ex vat)

SUS207

These specially formulated, high-quality rear shock absorber bushes have been designed for better stability, handling, and control in on-road, off-road, and race track applications.

Set of eight for top and bottom of rear shock absorbers (one side shown).

Trailing Arm Bush - Front

Trailing Arm Bush – Front

£9.00 GBP (ex vat)

SUS208

Standard – Large version for cars 1968 onwards, 50mm O.D. Two per car, priced individually.

Trailing Arm Bush - Front - Early Small

Trailing Arm Bush – Front – Early Small

£24.00 GBP (ex vat)

SUS210

Trailing arm bushes – front – Early small version for cars up to 1968. Two per car.

Trailing Arm Bush - Front - Heavy duty

Trailing Arm Bush – Front – Heavy duty

£15.00 GBP (ex vat)

SUS209

Heavy duty version, recommended for fast road and competition cars. Large for cars 1968 onwards. Two per car. 50mm Exterior dimension.

Trailing Arm Bush - Rear

Trailing Arm Bush – Rear

£9.00 GBP (ex vat)

SUS211

Standard -all cars. Two per car.

Trailing Arm Bush - Rear - Heavy Duty

Trailing Arm Bush – Rear – Heavy Duty

£15.00 GBP (ex vat)

SUS212

Heavy duty version, recommended for fast road and competition cars – all cars. Two per car. 45mm exterior dimension.

Trailing Arm Bolt Kits

Trailing Arm Bolt Kits

£45.00 – £49.95 GBP (ex vat)

SUS-105-TAB | SUS-105-TAWB

Alfaholics production, CNC machined trailing arm bolt kits complete with nyloc nuts. Available to order for with or without a rear ant roll bar.

Standard Rear Trailing Arm

Standard Rear Trailing Arm

£80.00 GBP (ex vat)

SUS214/2

Standard rear trailing arm reproduction items with no bushes.

Alfaholics Lightweight Trailing Arms

Alfaholics Lightweight Trailing Arms

£205.00 – £235.00 GBP (ex vat)

RCE5010 | RCE5011

Key Details

  • Premium production, exclusive to Alfaholics. Not to be confused with cheap imitation items on the market!
  • We have made these using brand new trailing arms, NOT second hand.
  • They feature drilled and deeply swaged (indented) holes.
  • The correct depth of the swaging on these trailing arms provides greater torsional rigidity than the original, thereby minimising deflection under corning loads
  • These trailing arms have been bead blasted after drilling & swaging.
  • Finished in superb high quality black powder coating.

They have been trialed to huge success for the last 5 seasons. We are now happy to offer these in two variations;

  • Lightweight version with large swaged holes (2.9K/6.39lbs)
  • Extreme lightweight version with both large and small swaged holes (2.5KG/5.5lbs).

Priced Individually.

 

Chassis Trailing Arm Support Bracket

Chassis Trailing Arm Support Bracket

£24.00 GBP (ex vat)

SUS301

Chassis bracket that fits under the front trailing arm pick up on the chassis.

Alfaholics Aluminium T-Bar

Alfaholics Aluminium T-Bar

£495.00 GBP (ex vat)

SUS2001

Kit Includes

  • Alfaholics Aluminium T-Bar
  • A range of spacers to help shim the axle centrally
  • A pair of Alfaholics polyurethane conical bushes
  • End bushes machined from latest technology Igis anti-friction material.

Key Details

  • 4KG weight saving over standard cast iron item!
  • Cast from race grade aluminium and heat treated for additional strength.

The end bushes for attachment to the chassis are machined from latest technology Igis anti-friction material. This provides improved lateral axle location compared with the commonly used polyurethane end bush, as well as smoother vertical movement of the axle.

T-bar End Bush

T-bar End Bush

£16.00 GBP (ex vat)

SUS218

Bush for the end of T-bar, where it attaches to the body frame. Two bushes required per car, priced individually.

T-Bar End Bush Housing

T-Bar End Bush Housing

£29.95 GBP (ex vat)

SUS217

Housing for T-bar end bush, these often break when the bush is being removed for replacement!

T-bar Thrust Washers - Polyurethane

T-bar Thrust Washers – Polyurethane

£7.95 GBP (ex vat)

SUS218/1

Fits between T-bar and T-bar end bush-pair.

T-bar Conical Bushes

T-bar Conical Bushes

£6.00 GBP (ex vat)

SUS215

Standard T- Bar conical bushes, only sold as a pair.

T-bar Conical Bushes - Polyurethane

T-bar Conical Bushes – Polyurethane

£9.95 GBP (ex vat)

SUS216

T-Bar conical bushes in Polyurethane. Recommended by Alfaholics for high-performance applications and standard cars where long life is required. Two required per car, sold as a pair.

Rear Axle Bump Stop

Rear Axle Bump Stop

£8.00 GBP (ex vat)

SUS221

Rear axle bump stops to suit all 105 models apart from early cars with the Dunlop set up. Two required per car, sold individually.

Rear Axle Bump Stop Spacer

Rear Axle Bump Stop Spacer

£19.95 GBP (ex vat)

SUS221/SP

Alfaholics production clear sulphuric anodised rear axle bump stop spacer to suit 105 series cars.

Rear Axle Bump Stop Spacer Mounting Plate

Rear Axle Bump Stop Spacer Mounting Plate

£9.95 GBP (ex vat)

SUS221/MS

Replacement rear axle bump stop metal mounting plate for the rear suspension bump stop on all 105 Series cars. Two required per car, priced individually.

Rear Bump Stop Spacer Fixing Screw

Rear Bump Stop Spacer Fixing Screw

£2.95 GBP (ex vat)

SUS221/SC

Rear bump stop spacer fixing screw to suit all 105 Series cars. Allen key style head to make fitting and removing easier. Two required per bump stop (four per car), priced individually.

Rebound Strap Guide Plate

Rebound Strap Guide Plate

£11.25 GBP (ex vat)

SUS221/RGP

Rebound strap guide panel to be fitted under the rear axle bumpstop. Two required per car, priced individually.

Re-bound straps

Re-bound straps

£12.75 GBP (ex vat)

SUS222

Set of 4 for a car (two per side) -Full length for standard ride height cars. To suit all 105 series.

Original Style Re-bound Straps

Original Style Re-bound Straps

£82.00 GBP (ex vat)

SUS222/1

Original style re-bound straps in the correct colour and material with rubber edging to prevent fraying for all GT, Giulia and Spiders between 1968 and 1982.  Set of 4 in the correct length with holes pre-drilled and ready to fit.

Rebound Strap Fitting Plates

Rebound Strap Fitting Plates

£15.00 GBP (ex vat)

SUS223

Re-bound strap fitting plates with nuts and bolts, 2 sets needed per car.

Rear Anti Roll Bar Drop Link

Rear Anti Roll Bar Drop Link

£58.00 GBP (ex vat)

RDL/GT

Rear anti roll bar drop link including bushes.

 

Rear Anti-roll Bar Drop Link Bush

Rear Anti-roll Bar Drop Link Bush

£3.50 GBP (ex vat)

SUS224

Rear anti-roll bar bush, four required per car, sold individually.

Rear Anti-roll Bar Mounting Rubber

Rear Anti-roll Bar Mounting Rubber

£3.50 GBP (ex vat)

SUS225

Rear anti-roll bar rubber to fit the rear bar to floor of car. Two per car.

Rear Anti Roll Bar Bracket

Rear Anti Roll Bar Bracket

£9.50 GBP (ex vat)

SUS-ARBB

Rear anti-roll bar mounting bracket.