GTA-R 290 Suspension Package - GTA-R - GTA-R - Alfaholics

GTA-R 290 Suspension Package

£8,375.00 GBP (ex vat)

GTAR/PACK/SUS290

-+Add to Quote

Top specification GTA-R 290 suspension system as used on our GTA-R 290 builds. This integrates our best suspension systems as a precisely matched, very lightweight & high mechanical specification package, for all your ultimate fast road/canyon driving & track uses.

This kit comprises the following components:-

Alfaholics Geometry Kit. Correcting roll centre height, roll-camber characteristics, improved castor angle and bumpsteer free steering.
Alfaholics fully adjustable 2 1/4" small spring kit. For further weight saving & to ensure optimum geometry setup adjustments
Alfaholics double adjustable race dampers with refined valving range and the ability to adjust both the compression and rebound valving separately.
Alfaholics titanium front shock mounting shock pins.
Alfaholics CNC machined billet aluminium rear shock turrets to save weight and set rear shock height to match the lowered ride height.
Alfaholics premium race spec front anti-roll bar with durable mounting bushes & rose jointed drop links
Alfaholics military spec 7000-grade billet aluminium quick steering arms increasing the ratio of your steering to GTA specification.
Alfaholics aluminium uniball T-Bar, providing huge weight reduction and for improved axle articulation and reduced rear roll stiffness resulting in improved rear grip & traction.
Alfaholics GTA-R extreme lightweight trailing arms. A weight saving of over 2kg (4.4lb)
High quality Alfaholics production, CNC machined titanium suspension bolt kit.
Full set of 16 titanium wheel studs and 16 open end titanium race wheel nuts. Over 50% weight saving over the equivalent steel parts, which equals 1.09kg (2.4lb) reduction of unsprung and rotational weight.

This kit represents a weight saving of over 21kg (46.3lbs) over the equivalent original Alfa parts. We will also supply a full installation guide and aftersales advice to get you racing towards the track.

Related Products

Alfaholics GTA-R Billet Front Upright Set

£3,250.00 GBP (ex vat)

GTA-R/UPRS

We have developed these new CNC machined billet uprights to tackle the last remaining engineering flaw in the design of 105/115 series front suspension when used in a high performance application. Alfa designed the uprights with relatively small diameter spindles for mounting the front hub/disc assemblies, which suited the standard wheel/tyre package the factory used. However, when these factory uprights are used with modern high grip tyres, owners all suffer from a long brake pedal after going through a series of corners (either on road or track) that require the brake pedal being pumped once to get the bite point back to the correct pedal height – this effect is known by performance drivers as “pad knock back”. This is caused by the thin spindle flexing in the upright from the loading and that causes the discs move and push the brake pads away from the discs, causing the long brake pedal. To tackle this issue we have completely redesigned the uprights using a larger diameter spindle and a more robust fitment area where they into the upright to give them additional support. Whilst redesigning the uprights and knowing we going to be machining from billet, it also gave us a blank canvas with regard to the pickup geometry of the upper and lower ball joints. With careful analysis and computer simulation of the KPI, scrub radius with our 7x15” GTA wheels, roll camber correction factor and roll centre height, we have modified the upper and lower ball joint locations to optimise all these important suspension kinematic factors. The nett result is handling with a faster transient response times in direction change, improved tyre temperature distribution across the tyre face, reduced tyre wear, reduced steering effort and reduced kick back from the steering in oversteer condition. These uprights are designed to be used with all our ultimate specification GTA-R front suspension components to get the very most out of the cars, so need to be used in conjunction with our geometry kit and our titanium top wishbones. Because of the modified upper and lower pickup positions, to retain correct bumpsteer geometry, these uprights must be used in conjunction with our steel angled quick steering arms, not our straight billet aluminium quick steering arms. These uprights have been optimised to fit with our 6-pot brake kit and have 1750/2000 (89mm) caliper bolt spacing, but can be used with other brakes that are compatible with 2000 uprights, however, you might have to make modifications for disc offset in the caliper. Supplied as a pair with a machining set of wheel bearings and hub oil seals to work in conjunction with your factory wheel hubs. Also supplied with a pair of short outer track rod taper pins and a range of spacer shims to allow you to measure & optimise your bumpsteer which are designed to be used with our steel quick steering arms and rose jointed track rod kit (available separately)

Alfaholics Billet Titanium Lower Wishbone Set

£5,495.00 GBP (ex vat)

GTAR/TI/WISH

CNC machined billet titanium wishbone arms with titanium 4-bolt version cross pins and titanium nyloc nuts – save an incredible 5KG over factory parts! We have designed these arms for direct fitment to all 105 series cars with 4-bolt version engine cross members. Cars with 2 bolt cross members can retro-fit these arms by modifying the cross member to later spec, as per the period Alfa technical bulletin. Dependant on your race series regulations, they can be used in conjunction with our lightweight spring pans or our fully adjustable 2 ¼” conversion and with either a factory bottom ball joint or our geometry kit lower pickup. The arms use race type spherical bearings rather than the factory metallastic bush to ensure greater geometry precision. As fitted to all top specification Alfaholics GTA-R builds.

GTA-R Brake Package

£2,875.00 - £3,225.00 GBP (ex vat)

GTAR/PACK/BPS

Following the success of our full GTA-R suspension package, we have introduced the equivalent full brake package. This consists of:- Choice of Alfaholics Billet aluminium bias adjustable pedal box (either RHD, floor pedal LHD or hanging pedal LHD) Alfaholics 6-pot front brake kit Alfaholics billet aluminium rear calipers Sport rear discs Alfaholics Braided brake line – set of 3 Alfaholics front caliper banjo brake lines Ferodo DS performance brake pads for race or road/track day application. Available as standard 6-Pot or upgrade this kit to Superleggera version which represents a 1.5KG weight saving in both un-sprung and rotational weight, as fitted in all our GTA-R 290 builds.

GTA-R 2000 Nord Engine Package – 2.1L Conversion +100BHP

£12,195.00 GBP (ex vat)

ENGPACK/S6

A full kit of Alfaholics parts to rebuild and uprate a complete 2000 Nord engine to our stage 6 extreme road/trackday/race specification. +100BHP (215BHP) when used in conjunction with our full s/s sports exhaust which we consider essential at this stage of tune. We cannot emphasis how well this engine drives and it is equally at home as the ultimate fast road engine as it is the ultimate race winning engine! Kit highlights include our hollow billet cams in high performance race profile, race quality valve gear with full set of 8mm oversize race valves & titanium retainers, 10mm race plug conversion kit, 94mm long stroke crank, forged high compression lightweight ultra-short skirt overbore pistons with oversize liners & steel rods as a matched system with optimised geometry, race quality crank bearings, race quality chains, lower chain tensioner, long carb mounts, billet aluminium crank pulley, windage tray, high capacity OE manufacturer oil pump, race quality head stud/nut kit, mass damper version of our flat flywheel to accept competition clutch kit, race head gasket, competition quality running in oil to use for the first 500 miles & ultra-duty competition fully-synthetic oil to put in after with filters for both oil changes. Kit designed to run with 45mm carbs.