Fuel Parts & Fuel Tanks for 105 Alfa Romeo

Fuel Tank – GT

Fuel Tank – GT

£170.00 GBP (ex vat)

FUL001/1

Reproduction standard fuel tank for 105/115 series GT models fitted with carburettor.

Fuel Tank - 2000 GTV

Fuel Tank – 2000 GTV

£195.00 GBP (ex vat)

FUL001/2

Reproduction fuel tank for 105/115 series 2000 GTV models fitted with carburettors.

It will also fit other GT models if larger capacity is required, will need 2000 type sender.

Fuel Tank – 2000 GTV Spica

Fuel Tank – 2000 GTV Spica

£275.00 GBP (ex vat)

FUL001/2SP

Reproduction standard fuel tank for USA 115 series 2000 GTV fitted with Spica fuel injection.

Has correct outlets and vents.

Can also be used in US 1750 GTV.

Fuel Tank - Duetto

Fuel Tank – Duetto

£220.00 GBP (ex vat)

FUL001/6

Reproduction standard fuel tank for 105 Series Duetto 1600, 1300 Junior and 1750 Veloce roundtail models with carburettors (NOT USA Spica).

Fuel Tank - 2000 Spider

Fuel Tank – 2000 Spider

£155.00 GBP (ex vat)

FUL001

Reproduction standard fuel tank for 105/115 series Spider 2000 models fitted with carburettors. NOT FOR USA Spica or Bosch injected cars.

Fuel tank - Spider Fuel Injection

Fuel tank – Spider Fuel Injection

£195.00 GBP (ex vat)

FUL001/3B

For Spiders running Bosch electronic fuel injection.

Fuel Tank - Spica

Fuel Tank – Spica

£210.00 GBP (ex vat)

FUL001/3S

Reproduction standard fuel tank for 115 series US Spiders fitted with Spica fuel injection, has correct outlets and vents.

Fuel Tank - Giulia Saloon

Fuel Tank – Giulia Saloon

£175.00 GBP (ex vat)

FUL001/7

Reproduction standard fuel tank for all Giulia Ti, Super and Nuova Super saloons.

Fuel Tank Seal

Fuel Tank Seal

£8.00 GBP (ex vat)

FUL001/4

Fuel tank rubber seal fits between the fuel tank and the boot floor.

Fuel Filler Neck Seal

Fuel Filler Neck Seal

£38.00 GBP (ex vat)

RUB023

Fuel filler neck seal.

Fuel Filler Neck Seal

Fuel Filler Neck Seal

£68.00 GBP (ex vat)

RUB045

Fuel filler neck to suit all Spiders

Fuel Tank Sender – Jaeger

Fuel Tank Sender – Jaeger

£50.00 GBP (ex vat)

FUL002

Fuel tank level sender for Jaeger instruments in cars fitted with GT, Duetto and Giulia Saloon tank. For 2000 tanks use the longer 2000 sender – seal included.

Fuel Tank Sender - Veglia

Fuel Tank Sender – Veglia

£50.00 GBP (ex vat)

FUL003

Fuel tank level sender for Veglia instruments in cars fitted with GT, Duetto and Giulia Saloon tank. For 2000 tanks use the longer 2000 sender – seal included.

Fuel Tank Sender - 2000

Fuel Tank Sender – 2000

£50.00 GBP (ex vat)

FUL004

Fuel tank level sender for cars fitted with “2000” GTV or Spider tank. Can be used with Spica tanks but the outlet must be sealed off – seal included

Fuel Tank Sender Spider Electronic Fuel Injection

Fuel Tank Sender Spider Electronic Fuel Injection

£50.00 GBP (ex vat)

FUL004/1

Sender for 115 series Spiders fitted with Bosch fuel injection system -seal included

Fuel Tank Sender Cover

Fuel Tank Sender Cover

£45.00 GBP (ex vat)

FUL-105-FSC

Protection cover for the fuel tank sender to suit all 105 Series cars. Please note this is made of black rubber, whereas the original type was made of dense foam.

Fuel Filler Connecting Hose Spider

Fuel Filler Connecting Hose Spider

£39.95 GBP (ex vat)

FUL-SPT20

Reproduction fuel filler connecting hose to suit 2.0 ltr Spider tank.

Spider Fuel Connecting Hose

Spider Fuel Connecting Hose

£15.95 GBP (ex vat)

RUB102

Fuel filler neck connecting hose for 2000 Spiders. Fits between the filler neck and the fuel tank.

Fuel Sender Connecting Sleeve

Fuel Sender Connecting Sleeve

£19.95 GBP (ex vat)

FUL038

For use with S4 Spider and Alfa 75 to connect in tank lift pump to the sender tube.

GT Fuel Flap Rubber Buffer

GT Fuel Flap Rubber Buffer

£3.25 GBP (ex vat)

RUB025

Fuel flap buffer for all 105 series Coupe and Saloon models. Sold individually, two used per car. The cars should also be fitted with the fuel flap opening rubber, please see related products.

Lockable Fuel Cap

Lockable Fuel Cap

£11.95 GBP (ex vat)

FUL099

Reproduction stainless steel lockable fuel cap complete with two keys for Spiders. Not for 2000 screw-fit fuel tanks (most models 1955-72).

Lockable Fuel Cap

Lockable Fuel Cap

£25.00 GBP (ex vat)

FUL121/S | FUL121/BY

Lockable fuel cap complete with two new keys.

Stainless Steel Fuel Cap

Stainless Steel Fuel Cap

£9.25 GBP (ex vat)

FUL121

Reproduction non-locking stainless steel fuel cap.

Fuel Flap Spring

Fuel Flap Spring

£4.50 GBP (ex vat)

RUB024

Return closing spring for the fuel filler flap for all 105 Series Coupes and Saloons.

Fuel Flap Rivet

Fuel Flap Rivet

£3.50 GBP (ex vat)

RUB026

Reproduction aluminium fuel flap rivet that is used as hinge pins for the fuel filler flap on 105 Series Coupes and Saloons. Two used per car, priced individually.

Mechanical Fuel Pump

Mechanical Fuel Pump

£29.95 GBP (ex vat)

FUL005

Mechanical fuel pump for carburettors cars includes two gaskets. Please make sure you have the plastic spacer before fitting. This is the best production mechanical fuel pump on the market.

Fuel Pump Paper Gasket

Fuel Pump Paper Gasket

£1.50 GBP (ex vat)

FUL005/5

Fuel pump paper gasket mounted on the lower front timing cover on carburettored 101 Normale and 105 Series cars. Cars will require two gaskets one fitted on either side of the plastic insulating spacer block (see diagram). Priced individually.

Fuel Pump Plastic Spacer

Fuel Pump Plastic Spacer

£3.50 GBP (ex vat)

FUL005/2

Fuel pump plastic mounting spacer to suit mechanical fuel pumps mounted down on the front timing cover of the engine. Sits between fuel pump and block (see diagram).

Alfaholics Fuel Pump Blanking Plate

Alfaholics Fuel Pump Blanking Plate

£9.95 GBP (ex vat)

RCE4022/2

Laser cut aluminium blanking plate for blanking off the block when using an electric fuel pump.

Electric Fuel Pump - Spider, Alfetta & 75

Electric Fuel Pump – Spider, Alfetta & 75

£90.00 GBP (ex vat)

FUL005/1

Electric in line main high-pressure fuel pump for Bosch Motronic cars.

Lift Pump - Spider & 75 / Milano

Lift Pump – Spider & 75 / Milano

£79.00 GBP (ex vat)

FUL005/3

Reproduction Spider lift ‘in tank’ fuel pump for S3 & S4 Spider with Bosch fuel injection. Also fits 75 Twin Spark with Bosch injection.

Fuel Pump Mounting Rubber

Fuel Pump Mounting Rubber

£7.95 GBP (ex vat)

FUL005/4

Pair of fuel pump mounting rubbers.

Using these rubbers will reduce the vibration and noise generated by the fuel pump.

Can be used with all facet fuel pumps.

Fuel Filter Small

Fuel Filter Small

£4.50 GBP (ex vat)

FUL007

Fuel filter for standard Fispa pressure regulator with glass bowl.

Fuel Filter Large

Fuel Filter Large

£4.80 GBP (ex vat)

FUL006

Fuel filter for standard Fispa fuel pressure regulator with a metal bowl.

Fuel Filter Assembly

Fuel Filter Assembly

£75.00 GBP (ex vat)

FUL007/1

Higher quality replacement for the standard and now unavailable Fispa pressure regulator, complete unit with filter.

The Filter King fuel pressure regulator has been designed to improve the carbuettor seeding system. Fuel flow is steady and constant at any weather, ambient, and driving conditions, thanks to its wide and sensible diaphragm inside the system, this prevents overload, stalling or starvation of the engine.

Filter King avoids these problems by reducing and regulating the fuel pressure, with a perfect idle, immediate and fast start of engine. The vehicle will run smoother without loss of performance at high rpm, as the pressure to carburettor will be set for the max engine power, plus additional safety percentage, according to the size of the needle valve. Filter King is manufactured with the best materials, by accurate machining and quality controls.

Injection Fuel Filter - Spider & 75 / Milano

Injection Fuel Filter – Spider & 75 / Milano

£12.50 GBP (ex vat)

FUL008

Inline fuel filter to suit fuel injected engines.

Carburettor Rubber Mounts

Carburettor Rubber Mounts

£19.95 – £39.95 GBP (ex vat)

FUL016 | FUL017

Standard quality reproduction carburettor rubber mount, priced per unit, four required per car. NOTE, we recommend fitting the more durable aluminium type mounts for reliability and increased service life.

Double Carburettor Mount

Double Carburettor Mount

£58.00 GBP (ex vat)

FUL016/01

Double version of  40mm single rubber car mount, fits in the centre to link the carburettors. You will also need  two 40mm single carburettor mounts for the outer. NOTE, we recommend fitting the more durable aluminium type mounts for reliability and increased service life see related products.

Carburettor Rubber Mounts - 40mm - S3 Spider/Alfetta

Carburettor Rubber Mounts – 40mm – S3 Spider/Alfetta

£23.95 GBP (ex vat)

FUL017/2

Different version for some late inlet manifolds where fixed on with nuts rather than studs. On some S3, 1600 S4, and Alfetta.

Alfaholics Aluminium Carburettor Mounts

Alfaholics Aluminium Carburettor Mounts

£115.00 GBP (ex vat)

FUL2001 | FUL2002

Set of four CNC machined from billet aluminium carburettor mounts.

Fits 105 and 116 series cars up to 1985 with mounts that bolt into the manifold from behind.

The kit is supplied complete with studs pre-fitted in the mounts, ‘O’ rings, Thackery washers and nyloc nuts.

Over time, the original rubber mounts crack and leak air causing the mixture to weaken and consequently the engine to run roughly. Even the replacement reproduction rubber mounts have been known to crack prematurely and this has led us to manufacture these billet aluminium items for use as a direct replacement.

They use rubber ‘O’ rings to form a perfect seal between the mount and the carburettor. These rubber ‘O’ rings, together with Thackery washers (included in the kit), provide each carburettor with the necessary damping from engine vibrations.

This ‘O’ ring set-up is used widely for racing as it is considered to be the most effective and reliable method of carburettor mounting.

Aluminium Carburettor Mounts – Long Sport Version

Aluminium Carburettor Mounts – Long Sport Version

£225.00 GBP (ex vat)

FUL2003 | FUL2004

Set of four Alfaholics production CNC machined from billet aluminium.

Fits 105 and 116 series cars up to 1985 with mounts that bolt into the manifold from behind.

The kit is supplied complete with studs pre-fitted in the mounts, ‘O’ rings, Thackery washers and nyloc nuts.

Over time, the original rubber mounts crack and leak air causing the mixture to weaken and consequently the engine to run roughly. Even the replacement reproduction rubber mounts have been known to crack prematurely and this has led us to manufacture these superb billet aluminium items for use as a direct replacement.

They use premium quality rubber ‘O’ rings to form a perfect seal between the mount and the carburettor. These rubber ‘O’ rings, together with Thackery washers (included in the kit), provide each carburettor with the necessary damping from engine vibrations.

This ‘O’ ring set-up is used widely for racing as it is considered to be the most effective and reliable method of carburettor mounting.

Our long carb mount have an increased inlet tract length of 40mm for improved mid range torque and maximum power. These items are ported as standard for 45mm carburettors and use a separate bonded rubber Misab ‘O’ ring plate and as a result allow porting for up to 48mm carburettors. The kit is supplied complete with studs pre-fitted in the mounts, Misab ‘O’ ring plates, thackery washers and nyloc nuts. All Alfaholics road and racing engines are now supplied fitted with aluminium carburettor mounts as standard.

Carburettor Gasket - 40mm

Carburettor Gasket – 40mm

£0.55 GBP (ex vat)

FUL016/02

Paper gaskets for each side of carb mounts.

Eight needed for rubber gaskets, four needed when using our aluminium carb mounts.

Carburettor Gasket - 45mm

Carburettor Gasket – 45mm

£1.50 GBP (ex vat)

FUL017/1

Pper gaskets for each side of carb mounts.

Eight needed for rubber gaskets, four needed when using our aluminium carb mounts.

Carb Airbox Gasket

Carb Airbox Gasket

£3.75 GBP (ex vat)

FUL017/3

Gasket to fit between the air intake trough and the carburettor body on all carburettored 105 series cars fitted with side draught carburettors.

Inlet Manifold Gasket

Inlet Manifold Gasket

£5.95 GBP (ex vat)

FUL023

Inlet manifold gasket to fit all twin carburettor 105 series cars 115 & 116 engines.

Not for fuel injected 115 series cars except Spica.

Inlet Manifold Gasket - Injection

Inlet Manifold Gasket – Injection

£6.00 GBP (ex vat)

FUL023/1

Inlet manifold gasket to suit Bosch Motronic injection engines.

Air Filter Rubber Trunking

Air Filter Rubber Trunking

£29.95 GBP (ex vat)

ENG2056

Reproduction air filter rubber crossover trunking to suit early air filter set-up on 105 series cars. Also fits 1600 SS and 101 1600 Spider Veloce.

Airflow Metre Hose - Spider

Airflow Metre Hose – Spider

£45.00 GBP (ex vat)

ENG2056/1

Reproduction rubber cross over air trunking for Bosch injected Spiders (1982-1993) S3 and all S4 Spider with Bosch Motronic injection.

Early Air Filter

Early Air Filter

£24.00 GBP (ex vat)

ENG2058

Reproduction air filter to fit the canister on the crossover intake 105.26 early type.

Late Air filter

Late Air filter

£12.00 GBP (ex vat)

ENG2057

Reproduction cylindrical air filter to suit later model 105 series cars from 1970 onwards.

Air filter Housing Rubber Seals

Air filter Housing Rubber Seals

£10.95 GBP (ex vat)

ENG2057/1

Reproduction rubber gasket filter for aluminium trough to air filter canister (1968-1978)

See diagram for reference.

Air Filter - S3 Spider

Air Filter – S3 Spider

£17.95 GBP (ex vat)

ENG2060

Reproduction air filter to suit S3 Spider (1984-1988).

Air Filters Spica

Air Filters Spica

£32.95 GBP (ex vat)

FUL-105-SAF

Pair of air filters to fit the intake system of US specification Spica mechanical fuel injection 4 cylinder cars.

Air Filter - S4 Spider & 75 / Milano

Air Filter – S4 Spider & 75 / Milano

£15.00 GBP (ex vat)

ENG2061

Flat style air filter to fit Bosch fuel injected engines.

Air Filter Clamp - S1

Air Filter Clamp – S1

£45.00 GBP (ex vat)

FIL/A1ST

Air filter clamps

Airbox Clamp

Airbox Clamp

£18.95 GBP (ex vat)

FUL034

Metal strap to fit the tubular 105.48 style air-filter canister fitted to 105 series cars (1970-1986).

Alfaholics Pipercross Air Filter

Alfaholics Pipercross Air Filter

£39.95 GBP (ex vat)

ENG2057/2

This filter is an upgrade for the standard 105.48 air filter fitted to all 1968-1982 105 series cars. It fits directly into the standard airbox, improving airflow and therefore performance.

Foam filters take the idea of having larger holes and using oil to catch the dirt particles but use this in a different format. The Multi laminate reticulated foam uses layers of different specifications of foam, each layer catching different sized particles whilst allowing the air to flow freely. This gives foam an advantage over the cotton filter, although both filters flow well, the foam media allows the filter to still maintain airflow even at high levels of Dust loading.

The long-term benefit is that it won’t get blocked up or lose performance over time, meaning that the performance of the air filter is consistent from service to service, you maintain that brand new filter performance.

Alfaholics Pipercross Single Filter

Alfaholics Pipercross Single Filter

£88.00 – £95.00 GBP (ex vat)

FUL030 |

One-piece filter for both carbs with backing plate and integrated Gauze.

Due to clearance to the steering box casing on RHD cars and chassis leg, this filter will only fit cars that have 1750 or 2000cc engines installed. For 1300 & 1600 models, we recommend the fitment of the GTA curved ram pipes.

Foam filters take the idea of having larger holes and using oil to catch the dirt particles but use this in a different format. The Multi laminate reticulated foam uses layers of different specifications of foam, each layer catching different sized particles whilst allowing the air to flow freely. This gives foam an advantage over the cotton filter, although both filters flow well, the foam media allows the filter to still maintain airflow even at high levels of Dust loading.

The long-term benefit is that it won’t get blocked up or lose performance over time, meaning that the performance of the air filter is consistent from service to service, you maintain that brand new filter performance.

Pipercross Air Filter Service Kit

Pipercross Air Filter Service Kit

£12.50 GBP (ex vat)

SER-AIR

Dirt Retention oil is needed when re-applying the oil to your filter, this improves the filtration and performance of the filer, most of our filters are designed to work oiled.

The cleaning formula is the most ideal solution to clean the filter back and remove any old oil and dirt, this will help you get the most life out of your filter and offer the best service.

Only available for shipping via road freight, we cannot offer air freight shipping for this item.

Pipercross Air Filter Dirt Retention Additive

Pipercross Air Filter Dirt Retention Additive

£6.95 GBP (ex vat)

SER-AIR-AD

Dirt Retention oil is needed when re-applying the oil to your filter, this improves the filtration and performance of the filer, most of our filters are designed to work oiled.

The cleaning formula is the most ideal solution to clean the filter back and remove any old oil and dirt, this will help you get the most life out of your filter and offer the best service.

Only available for shipping via road freight, we cannot offer air freight shipping for this item.

Pipercross Constant Radius Ram Pipes

Pipercross Constant Radius Ram Pipes

£79.95 GBP (ex vat)

FUL031 | FUL031/45

Pipercross Ram Pipe set recommended for use with the Alfaholics Single Filter.

GTA Curved Ram Pipe Set

GTA Curved Ram Pipe Set

£260.00 GBP (ex vat)

GTACURV

Reproduction Ram Pipe of the “trumpet” style used on GTA Corsa cars in period.

The trumpets can be set at any angle you wish to alter the ram effect of the air intake and come complete with a base plate and locking rings.

Pipercross Ram Pipe Socks

Pipercross Ram Pipe Socks

£24.00 GBP (ex vat)

FUL032

Pair of rampipe socks made to fit perfectly over individual trumpets to prevent valve seat damage from dust. Best suited for use with GTA curved ram pipes or similar.

The single sock is designed to fit the most popular forms of trumpets and rampipes. Always make sure that the distance between the top of the trumpet rampipe and the inside of the top of the filter is no less than 20mm.

Weber Carburettor Rebuild Kit

Weber Carburettor Rebuild Kit

£29.95 GBP (ex vat)

FUL013

Weber carburettor rebuild kit for 40 and 45mm. This rebuild kit has everything you need to rebuild both carbs on the car.

Carburettor Rebuild Kit - Solex

Carburettor Rebuild Kit – Solex

£35.00 GBP (ex vat)

FUL014/2 | FUL014-1 | FUL014

This Solex rebuild kit includes all gaskets and o rings required to rebuild both carbs. There are three different versions of Solex available – brass fitting in main diaphragm changes.

Carburettor Rebuild Kit - Dell’Orto

Carburettor Rebuild Kit – Dell’Orto

£50.00 GBP (ex vat)

FUL015

This Dell’Orto rebuild kit includes all gaskets and o rings required to rebuild both carbs. All Dell’Orto carbs are the same.

Alfaholics Accelerator Return Spring

Alfaholics Accelerator Return Spring

£5.50 GBP (ex vat)

ACC002

Accelerator return spring to suit all 105 models (LHD or RHD).

Weber 45 DCOE Carburettor

Weber 45 DCOE Carburettor

£399.00 GBP (ex vat)

FUL009

The Weber 45 DCOE type 152 is the universal, performance 45 DCOE, infinitely tune-able, and possibly the most popular Weber carburettor for engine tuners, high-performance engine builders, and classic/sports car restorers.

The carburettors have a cable-operated choke fitted and come jetted well as a base point for 2.0L engines however, we recommend that you have the car set up and tuned on a rolling road to ensure optimal performance.

Weber 40 DCOE Carburettor

Weber 40 DCOE Carburettor

£399.00 GBP (ex vat)

FUL010

Weber type 151 is the universal performance 40 DCOE, tune-able, and one of the most popular WEBER carburettors for tuners, high-performance engine builders and classic/sports car restorers.

Brand new, price per carburettor, two required per car.

Weber Throttle Balance Linkage

Weber Throttle Balance Linkage

£39.95 GBP (ex vat)

FUL028/9

Complete throttle actuating lever/balance lever to suit Weber carburettors. You will need the lever when converting to new 45mm carburettors or as a replacement part for 40 DCOE carbs.

Weber Carburettor Jet Cover

Weber Carburettor Jet Cover

£11.50 GBP (ex vat)

FUL012/3

Reproduction of genuine Weber top jet cover to suit all Weber DCOE carbs. Two required per car, priced individually.

We recommend changing the jet cover gaskets at the same time, see related products.

Jet Cover Gasket

Jet Cover Gasket

£1.25 GBP (ex vat)

FUL012/4

New gasket for the top jet cover on all Weber DCOE carburettors.

40 / 45mm Carburettor Fuel Inlet

40 / 45mm Carburettor Fuel Inlet

£11.95 GBP (ex vat)

FUL012/5

Reproduction fuel inlet ‘T’ piece fuel union to suit all twin side draught carburettors on 105 series cars.

Ideal for 45mm carburettors but can also be used on 40mm versions.

Throttle Mechanism Linkage Kit

Throttle Mechanism Linkage Kit

£145.00 GBP (ex vat)

FUL009/FKL | FUL009/FKR

Full kit of throttle mechanism parts to replace or rebuild the typically worn linkages on all 105/115 twin carburettor models.

The kit parts are different for LHD and RHD cars.

For all Twin Spark converted cars, please select LHD – you will require the longer quadrant bracket to allow for the taller head height.

Alfaholics Throttle Mechanism Clamp Set (RHD)

Alfaholics Throttle Mechanism Clamp Set (RHD)

£85.00 GBP (ex vat)

TMCS-RHD

Throttle mechanism clamp set to suit all RHD 105 series cars.

CNC machined steel and black powder coated. Incorporating the original (often now missing) spacer that sits under one bracket to ensure the correct alignment from the bulkhead into the righthand clamp.

Alfaholics Throttle Mechanism Clamp Set (LHD)

Alfaholics Throttle Mechanism Clamp Set (LHD)

£70.00 GBP (ex vat)

TMCS-LHD

Throttle mechanism clamp set to suit all LHD 105 series cars.

CNC machined steel finished in black powder coated.

RHD Throttle Quadrant Assembly

RHD Throttle Quadrant Assembly

£85.00 GBP (ex vat)

FUL040

Perfect copy of the factory throttle quadrant setup for all right hand drive 105/115 series cars.

The original components are now nearly all very badly worn on the spindle as well as the ball joints, and this results in significant free play in the throttle mechanism and thus often not achieving anywhere near full throttle with the pedal pressed to the floor!

This complete assembly will direct bolt on and has excellent tolerances to ensure no free play in the system – a very simple BHP increase!

Also suitable for use with Twin Spark engine conversions.

Alfaholics Throttle Quadrant Assembly (LHD)

Alfaholics Throttle Quadrant Assembly (LHD)

£85.00 GBP (ex vat)

FUL040/1

A perfect copy of the factory throttle quadrant setup for all LHD 105 / 115 series cars.

The original components are now nearly all very badly worn on the spindle as well as the ball joints, and this results in significant free play in the throttle mechanism and thus often not achieving anywhere near full throttle with the pedal pressed to the floor!

This complete assembly will direct bolt on and has excellent tolerances to ensure no free play in the system – a very simple BHP increase!

Also suitable for use with Twin Spark engine conversions.

Accelerator Linkages

Accelerator Linkages

£230.00 GBP (ex vat)

AC-105-HP | AC-105-SP

Reproduction accelerator linkage to suit all 105 series cars. The linkages have been made to suit cars with standing or hanging pedals.

Alfaholics Weber Throttle Return Spring Kit

Alfaholics Weber Throttle Return Spring Kit

£17.95 GBP (ex vat)

FUL009/1

Laser cut and jig profiled external throttle return spring.

Plating supplied with spring.

Direct fitment for all Weber carbs, easy modification to fit Dellorto.

Adjustable Throttle Rod

Adjustable Throttle Rod

£19.95 GBP (ex vat)

FUL028/3

Adjustable length metal rod allows you to adjust for full throttle actuation!

To replace the usually poor condition and bendy standard plastic item. 

Requires metal ball fitting ends which are available separately, see related products.

Accelerator Rod

Accelerator Rod

£15.95 – £18.95 GBP (ex vat)

FUL028/7 | FUL028/72 | FUL028/73

Vertical throttle rod that fits between the carburettors on twin carburettor 101 and 105 series cars. Includes metal ends and spring retaining clips.

Throttle Rod End (Metal)

Throttle Rod End (Metal)

£4.95 GBP (ex vat)

FUL028/4

Metal end complete with internal circlips, for use as an option with adjustable throttle rod.

Small Throttle Linkage Ball

Small Throttle Linkage Ball

£2.50 GBP (ex vat)

FUL028/8

Small throttle linkage ball.

Alfaholics Large Throttle Linkage Ball

Alfaholics Large Throttle Linkage Ball

£9.95 GBP (ex vat)

FUL028/6

Stainless steel version of the large linkage that goes through the accelerator linkage ball.

Accelerator mounting rubber

Accelerator mounting rubber

£2.95 GBP (ex vat)

FUL028/2

Mounts mechanism to firewall.

Accelerator bush

Accelerator bush

£3.95 GBP (ex vat)

FUL028/1

Fits in the end of throttle actuation arm – ball fits through centre for long throttle rod to attach to.

Carburettor steady bar bush

Carburettor steady bar bush

£4.00 GBP (ex vat)

FUL024

Bush to fit in bottom of steady bar where it fits into engine mounting.

Accelerator Pedal

Accelerator Pedal

£38.00 GBP (ex vat)

FUL027

Correct more shaped version.

Featuring the correct shape to allow full throttle.

Carburettor Airflow Tester

Carburettor Airflow Tester

£48.00 GBP (ex vat)

FUL025

Ideal for balancing carburettors.

Rubber adaptor pipe available for easy use on cars fitted with standard air box.

Carburettor Air Flow Tester Rubber Adaptor

Carburettor Air Flow Tester Rubber Adaptor

£15.95 GBP (ex vat)

FUL025/1

Rubber adaptor pipe for easy use on cars fitted with standard airbox.