United Kingdom (ex VAT) 
Euro 
Australia 
Canada 
Denmark 
Japan 
New Zealand 
Norway 
South Africa 
Sweden 
Switzerland 
United States 
GTA-R Driveline Package
£10,840.00 – £10,895.00 GBP (ex vat)
GTAR/PACK/DRI | GTAR/PACK/DRI/S
Upgrade Options
Full kit of parts for gearbox, propshaft and axle to bring your complete driveline to full Alfaholics GTA-R specification using the best quality lightweight Alfaholics designed & manufactured parts.
Kit includes:-
- Close ratio gear kit with drilled & scooped lightweight gears, hollow layshaft all REM superfinished to reduce friction, internal temperatures & power loss.
- Full race quality Alfaholics designed and manufactured synchro rings & sleeves, bearing & seal kit.
- Quickshift kit to speed up shift times and give a more positive action. Use with factory gearlever for road cars, or our billet aluminium gear lever (included in kit) for race cars.
- Competition grade propshaft conversion kit with triple UJ design, CNC machined billet front drive flange and HD propshaft centre support, dynamically balanced to 10,000rpm.
- Competition grade plate LSD available in either road or race ramp angle setting – please choose which when ordering.
- Lightweight billet machined, rifle drilled & scalloped flange half shafts, available in either 25 splines GTJ or 27 splines GTV version depending on axle version required.
- Full set of axle bearings and seals, available in either GTJ or GTV sizing – please choose axle version required when ordering.
- Now including our motorsport grade steel selector rods & selector forks.
- cat_race_parts_gta_r: GTA-R
- filter_book_mechanical_main: Mechanical
- filter_gta_r_mechanical: Mechanical
- cat_race_parts: Race Parts
- cat_transmission: Transmission
Related Products
Alfaholics GTA-R Steel Selector Fork Set
£975.00 GBP (ex vat)
SRSFSET
Worn/damaged selector forks are becoming a bigger and bigger issue with Alfa gearboxes as they get older and increased performance & race use is highlighting the inherent design weaknesses of the standard parts. We have redesigned and manufactured these race quality forks by combining our considerable experience of high performance & motorsport use along with general modern motorsport knowledge to produce the ultimate selector fork set of 105/115 series gearboxes. We have added an additional pressure pad to control the synchro sleeve angle more accurately and to increase the total pad area and thus reduce pad wear rate, the net result is a sweeter and faster shift action. These forks are made of motorsport grade steel, so are also more resilient to abuse from over selecting than the factory bronze parts. As developed for and being used in our latest GTA-R builds.
Alfaholics Race Selector Rod Kit
£995.00 GBP (ex vat)
SROD34E | SROD34L
We are increasingly finding bent selector rods more and more when we are rebuilding gearboxes. This results not only in a sticky gear change but also causes the selector fork/synchro sleeve not running straight to the gear assembly which can cause premature wear, damage and more gearshift quality. They have proven very tricky to try to straighten and since the huge sucess of our manufacturing of billet 3rd/4th gear selector rods we have now evolved this into a full set of 3 rods manufactured from motorsport grade materials and machined to motorsport quality tolerance. we have also imporved the design of these to be tougher and stronger, 3rd/4th rod is an inherently weak part in the gearbox, the narrow width required as part of the gearbox design means that the clevis where the gear linkage drops into can easily get bent from ‘over-selecting’ gears. This risks a shift not fully selecting a gear and resultant massive gearbox damage. We have re-designed the part with greater radiuses and increased material thickness at the weak points to make the part more resilient to this ‘over-selection’ based driver damage.
Synchro Brake Strap 1st Gear
£25.00 GBP (ex vat)
STRP1ST
Premium quality Alfaholics production. Internal synchro strap for 1st gear, 1 required. We have made these to replace the often damaged part found fitted inside the synchro assembly. Typically these just get reused each time the gearboxes get rebuilt, but they are now getting to an age where these are simply damaged and will not allow the synchro to operate as it should.
Synchro Brake Strap 2/3/4/5 Gear – Pair
£55.00 GBP (ex vat)
STRP2TO5
Premium quality Alfaholics production. Internal synchro strap for 2nd, 3rd, 4th & 5th gear, 2 required per gear. We have made these to replace the often damaged parts found fitted inside the synchro assemblies. Typically these just get reused each time the gearboxes get rebuilt, but they are now getting to an age where these are simply damaged and will not allow the synchro to operate as it should.