GTA Parts

	Alfaholics GTA Distributor Alfaholics production, stunning quality. All components are fully 3D CAD drawn & CNC machined from billet, providing outstanding accuracy of components and quality control. The external body design follows the nicer early Marelli S119 1600 GTA distributor with vertical mounted condensors, while featuring the internal design and shaft dimensions of the later and improved spec Marelli S132 from the 1300 GTA. We bought a large stock of original Alfa Romeo new GTA points which we are fitting to all these units. Each distributor is supplied fully assembled and dyno tested to set the advance curve which has been optimised for modern fuels.  These curves have been developed on both our full race 1600 GTA andMore...	Price: £1995.00 (ex VAT)
	Alfaholics GTA Cap & Rotor Alfaholics production, 10mm shaft version for use with S132 distributors and the Alfaholics GTA Distributor. Rotor can be sleeved to use on an 8mm S119 distributor.	Price: £295.00 (ex VAT)
	Alfaholics GTA Distributor Drive Gear Alfaholics production. Fits to base of distributor, can be used with any original GTA distributor as well as the Alfaholics GTA distributor.	Price: £99.00 (ex VAT)
	Alfaholics GTA Distributor Drive Sleeve Alfaholics production. Internally splined sleeve to connect distributor drive to oil pump drive. Can be used with original GTA distributor and our Alfaholics GTA distributor.	Price: £125.00 (ex VAT)
	Alfaholics GTA Distributor Mounting Plate Alfaholics production. Exact replica of original plate used to mount GTA distributor onto any 105 Series front cover.	Price: £195.00 (ex VAT)
	Alfaholics GTA Strada 6×14 Manufactured in the UK exclusively for Alfaholics, ET33. Superb quality and extremely light.	Price: £115.00 each (ex VAT)
	Alfaholics Magnesium 7×14” GTA Wheel Manufactured exclusively for Alfaholics by the UK’s leading motorsport magnesium wheel manufacturer. This wheel has been manufactured to the very highest standards and designed with meticulous attention to detail, in order to ensure that it is an exact copy of the original 1st series Campagnolo wheel. Particular attention was paid to the accuracy of the vent hole – the main aesthetic feature. The wheel has been cast using the latest motorsport spec magnesium alloy, developed for Formula 3 racing and as a result weighs a mere 5.3kg, 0.2kg lighter than the original Alfa wheel! The wheels are finished in aMore...	Price: £650.00 (ex VAT)
	Alfaholics 1600 GTA Front Upright Copied directly from the original pair of uprights on our 1600 GTA race car for perfect accuracy. These uprights have been manufactured to the very highest standards, exclusively for Alfaholics, in the same factory in which McLaren Mercedes SLR uprights are made. They come complete with new spindles fitted and are finished in premium quality black powder coating.	Price: £750.00 each (ex VAT)
	Alfaholics Aluminium Race GTA Front Hub Alfaholics production, CNC machined from military grade billet aluminium with hard anodised surface finish. For race 1600 GTA with correct Dunlop brakes and 1600 GTA discs.	Price: £295.00 pair (ex VAT)
	Alfaholics GTA Aluminium Bonnet Brand new production, exclusive to Alfaholics and made to the very highest standards.  We laser-scanned a new old stock steel step front bonnet to enable us to CNC machine a solid resin tool for pressing the aluminium frame to ensure perfect accuracy. The skin is precision hand wheeled and then fitted to the frame which features all the factory pressings and captives. By making the skin and the frame from aluminium, the bonnet is very light. A race version is also available with swage-punched holes in the frame for additional weight saving.	Price: £2500.00 (ex VAT)
	Alfaholics 1300/1600 GTA Aluminium Front Wing Brand new production exclusive to Alfaholics, unrivalled quality! We recently bought an unrestored 1600 GTA with perfect bodywork from a private collection and used this unique opportunity to make a new production of front and rear GTA wings. Working exclusively with the official prototyping factory for Aston Martin, Bentley & Spyker, moulds were taken directly from all 4 wings on this GTA to create perfect resin bucks from which to manufacture the wings. This is the same process that is used to make runs of prototype cars and small runs of production cars for Aston Martin, Bentley & Spyker whereMore...	Price: £1195.00 (ex VAT)
	Alfaholics GTA Aluminium Rear Wing These wings are available in either the correct deep rear arch height for 1600 GTA & Sprint GT or the later shallow 1300 GTA & later GT versions. Please specify which version is required when ordering. Brand new production exclusive to Alfaholics, unrivalled quality! We recently bought an unrestored 1600 GTA with perfect bodywork from a private collection and used this unique opportunity to make a new production of front and rear GTA wings. Working exclusively with the official prototyping factory for Aston Martin, Bentley & Spyker, moulds were taken directly from all 4 wings on this GTA to createMore...	Price: £1195.00 (ex VAT)
	1967 Homologation GTA Blister Arches New Alfaholics production, premium quality pressing. These are a direct copy of the arches Autodelta had homologated for the 1967 season to give increased clearance at the rear of GTAs with 7″ wheels fitted. We used an original set of arches we had from Richard’s ex-Chiti GTA to make this production to ensure a faithful replication was possible. These can be fitted to both early deep arch GT as well later shallow arch GT. Fitting these allows the rear track to be increased by 10-15mm per side.	Price: £325.00 pair (ex VAT)
	1969 Homologation GTA Arch Extension Set Premium quality Alfaholics production. These fibreglass arches have been made from a set of original Autodelta moulds that Richard Banks acquired over 20 years ago, which we recently discovered in our Devon warehouse! These arches can be found under the part number 105.59.54.109.00/110.00 and are listed under the 1969 homologation sheets for the 1300 GTA and under the 1970 homologation sheets for the 1600 GTA. Fitting these arches provides a very simple, neat and attractive way of fitting GTAm type wheels, such as our new Alfaholics 8×15″ GTAm wheel.	Price: £275 set (ex VAT)
	Alfaholics GTA Roof Skin Brand new production exclusive to Alfaholics using our superb aluminium panel factory. Perfect quality and fit featuring drip rail and screen recess details. Aluminium A & C pillar production currently under progress to join this roof to our wings.	Price: £POA (ex VAT)
	GTA Aluminium Front Panel Pressed item, good quality.	Price: £760.00 (ex VAT)
	GTA Aluminium Rear Panel Pressed item, good quality.	Price: £395.00 (ex VAT)
	GTA Aluminium Rear Panel Inner Support Premium quality Alfaholics production	Price: £325.00 (ex VAT)
	GTA Aluminium Base of Rear Screen Panel Premium quality Alfaholics production.	Price: £750.00 (ex VAT)
	GTA Aluminium Bootlid Pressed item, good quality with correct frame design.	Price: £495.00 (ex VAT)
	Alfaholics 1600 GTA Stradale Front Seat Is your 1600 GTA missing its interior? Maybe your GTA Replica needs the ultimate interior finish? We have manufactured these 1600 GTA seats using identical materials and manufacturing methods as Alfa used originally to make these fabulously lightweight yet comfortable seats. The frames are made in complex full jigs from the same thin walled tube as original, directly copied from original frames to ensure perfect accuracy. Every feature is correct, even down to the CNC machined ball and sprung clip locator for the folding back. The vinyl has been sourced directly from original suppliers to Alfa Romeo to ensure theMore...	Price: £750.00 (ex VAT)
	Alfaholics 1600 GTA Corsa Front Seat A rare option on Stradale 1600 GTAs was to have a non-folding bucket type drivers seat for extra support whilst driving. This Alfaholics seat is a perfect copy of this option, first seen by Richard Banks fitted to his ex-Carlo Chiti LHD 1600 GTA.	Price: £750.00 (ex VAT)
	Alfaholics 1600 GTA Rear Seat Manufactured using identical materials and manufacturing methods as Alfa used originally to make these fabulously lightweight seats which weigh a mere 4kg in total! The back frame is fully jigged using the same wire design as original, directly copied from an original to ensure perfect accuracy. Every feature is correct, even down to the leather straps at the base to hold it in position. The vinyl has been sourced directly from original suppliers to Alfa Romeo to ensure the correct grain, perforation and colour was achieved.	Price: £950.00 (ex VAT)
	1600 GTA Seat Mounting Pods Superb Alfaholics production, laser cut, jig bent and fully TIG welded. These are bespoke to 1600 GTA and have often been cut off the floor pans when original seats have been replaced with competition seats. These are necessary to fit 1600 GTA seats in the correct position and angle.	Price: £99.00 set of 4 (ex VAT)
	1600 GTA Seat Runners Premium quality Alfaholics production. Exact copy of original seat runners with correct downward pointing adjuster knob. Perfect for both original GTAs missing their correct runners or for people converting their Bertone GT to use our Alfaholics production 1600 GTA seats.	Price: £99.00 per seat (ex VAT)
	Alfaholics 1600 GTA Interior & Boot Mat Kit 100% correct reproduction with foam backing and correct grey vinyl textured material, copied directly from a perfect original kit. Available in LHD or RHD format. Sold as a complete kit including boot, or just interior.	Price: £430.00/550.00 (ex VAT)
	Alfaholics 1300 GTA Interior & Boot Mat Set 100% correct reproduction with foam backing and correct black vinyl textured material, copied directly from a perfect original kit. Available in LHD and can also be produced in RHD if required. Sold as a complete kit including boot, or just interior.	Price: £430.00/£550.00 (ex VAT)
	Alfaholics GTA Headlining Exclusively manufactured for Alfaholics. Superb quality prestitched and tailored GTA headlining, featuring the rear section with recess. Correct ‘snake bite’ pattern & colour.	Price: £120.00 (ex VAT)
	Alfaholics GTA Close Ratio Gear Kit This superb GTA close ratio gear kit has been manufactured exclusively for us by the UK’s leading transmission manufacturer, Quaife Engineering. Unlike any other kit on the market, we have directly copied an original GTA gear kit. As a result, the gears are not only scooped, but they are also drilled for further weight saving, just as original GTA gears. The layshaft is rifle drilled, as original, for further weight reduction. All these weight savings and consequently reduced inertia, result in a gearbox with a lightning fast shift speed both up and down the ratios. Not only does this meanMore...	Price: £2995.00 (ex VAT)
	Alfaholics GTA Close Ratio Gear Kit – REM Superfinished As per above kit but put through a final REM Superfinish process. This process polishes the surfaces of the components at a particle level resulting in a super smooth chrome appearance finish. This finish results in the oil getting worked less hard inside the box resulting in reduced frictional losses – the result of this is a nett gain of BHP at the rear wheels.	Price: £3295.00 (ex VAT)
	GTA Cylinder Head New production cast and machined GTA cylinder head.	Price: £4750.00 (ex VAT)
	GTA Oil Pump Shaft Premium quality Alfaholics production. This shaft has been designed to fit the new high quality reproduction 105 GTV high capacity oil pumps that we stock. By using this shaft, any engine can be converted easily to run the GTA twin plug distributor. It is also ideal for use on racing GTAs, since it allows a GTV sump to be used in conjunction with the high capacity GTV oil pump. Not only does this mean increased oil flow due to the longer gear pump, but it also results in increased ground clearance, since GTV sumps are shallower than GTA magnesium ones.More...	Price: £225.00 (ex VAT)
	Magnesium GTA Cam Cover Superb quality production, very lightweight!	Price: £595.00 (ex VAT)
	Magnesium GTA Upper Sump Pan Correct deep version magnesium upper sump pan	Price: £995.00 (ex VAT)
	Magnesium GTA Lower Sump Pan Superb quality production, very lightweight!	Price: £695.00 (ex VAT)
	GTA Points Set for 1 distributor	Price: £60.00 (ex VAT)
	GTA HT Lead Set Superb quality. Original type thin green Cavis leads with correct ribbed plug ends. Includes king leads, all leads are numbered. (Distributor cap not included)	Price: £90.00 (ex VAT)
	Alfaholics GTA Race Silicone HT Leads Manufactured exclusively by the UKs leading HT Lead manufacturer to our bespoke specification using their very highest quality lead material. Includes 8 spark plug leads and 2 coil leads.	Price: £160.00 (ex VAT)
	GTA Oil Filler Cap Correct GTA style oil filler cap. Built in swivel top breather pipe to connect to oil catch tank. A must for high revving race 105 series engines to allow the engine to breath effiently. Special trap type entrance to breather to prevent excess amounts of oil being breathed as it comes off the chain.	Price: £99.00 (ex VAT)
	GTA Curved Rampipe Set Complete with base plate and locking rings.	Price: £275.00 (ex VAT)
	GTA Rear Numberplate Light Plinthe Copied directly from Richard Banks\’ 1600 GTA, this plinthe is an exact copy with perfect dimensions. (Lights not included)	Price: £69.50 (ex VAT)
	Alfaholics GTA Door Buttons Our first production of GTA door buttons several years ago was a huge success, since customers were delighted with the fact that they fitted perfectly, unlike the sub-standard Italian reproduction item which is still commonly available on the market. The problem was that we could not source enough Alfa lock mechanisms to satisfy demand! We therefore went back to the drawing board and designed a new button from scratch, which would use a high quality modern type of barrel lock. The button (with flat as original) and the body is CNC machined from aircraft grade aluminium to maintain tight tolerancesMore...	Price: £295.00 pair (ex VAT)
	GTA Hoop Door Handle Stunning reproduction of the aluminium GTA hoop door handle – Alfaholics production.	Price: £30.00 each (ex VAT)
	Alfaholics Production GTA Grille Kit Brand new production exclusive to Alfaholics, unrivalled quality! Manufactured using a perfect original grille kit on one of our 1600 GTAs as a template. This is the first kit from our new production which is manufactured along side factory grilles for Bentley & Spyker using identical methods to these motor manufacturers! The unique manufacturing methods employed not only allow for a much finer stainless steel edge beading, as original, but also result in perfectly accurate curvature top and bottom. The lower grilles are also a direct copy of an original, enabling these grilles to be fitted to original GTAs usingMore...	Price: £225.00 (ex VAT)
	GTA Quarterlight Handle Original Alfa Romeo, complete item including swivel boss to glue on to perspex quarterlight. Handed, left & right.	Price: £32.00 each (ex VAT)
	1300 GTA Sticker Kit 100% accurate copy of original 1300 GTA sticker set. Stunning quality & lazer cut. Kit comprises, bonnet serpent, side cloverleafs, side stripes and bootlid script. Available in white or green. Other colours available to special order.	Price: £65.00 set (ex VAT)
	GTA Steering Wheel Accurate replica of original GTA Hellebore steering wheel. Complete with hub and horn button assembly.	Price: £385.00 (ex VAT)
	GTA/TZ Billet Steering Column Extender Alfaholics production, CNC machined from billet aluminium to suit the unique bolt fitment pattern on GTA & TZ steering wheels. Bolts directly to hub face where steering wheel mounts to extend the steering column by 50mm. Steering horn push not affected.	Price: £60.00 (ex VAT)
	Alfaholics GTA Aluminium Radiator Made exclusively for Alfaholics to the highest manufacturing quality. This is an exact replica of an original GTA radiator but naturally with a huge weight saving and much better cooling efficiency. Perfect for FIA GTAs. This radiator is truely a piece of art! Fitted with high performance multi row core.	Price: £645.00 (ex VAT)
	Alfaholics Aluminium GTA Oil Cooler Alfaholics production. Superb accurate replica of original GTA oil cooler. Bolts into GTA radiator shroud at the top and to the radiator cross member at the bottom, as per original. Suitable for 1300 or 1600 GTA. We recognise that all GTAs are a little different and the shrouds are not all mounted in identical postions, thus the holes for the bolts are not drilled to ensure perfect fitment. Dash 10 hose fittings. Stunning quality! Add the Alfaholics GTA Oil Cooler Pipe Lines to this for £35!	Price: £335.00 (ex VAT)
	GTA Stainless Steel Braided Oil Cooler Pipe Lines Alfaholics production. With Dash 10 JIC thread fittings.	Price: £45.00 (ex VAT)
	GTA Aluminium Radiator/Oil Cooler Surround Alfaholics Production. Stunning quality and superb fit, features all the original pressings and detailings including the returns on the front blades. All parts are lazer cut including pop rivet holes and pressings made from gigs for maximum accuracy. Comes complete with boxed captive nuts for fitment of top of oil cooler. Available in bare aluminium as photographed, or finished in top quality black powder coating with black anodized pop-rivets. Also available as just the radiator section as shown below in photo of fitment to Alfaholics 2.0 Sprint GT Racer with Alfaholics GTA Radiator. Full surround shown fitted in 1600 GTAMore...	Price: £195.00 (ex VAT)
	Alfaholics GTA Race Engines Alfaholics can provide both 1300 and 1600 GTA engines in either fast road/rally or full race specification. Engines can be built to comply with FIA App.K regulations or alternatively fully modified rallying or racing. We can start with an existing engine, if supplied, or we can build an engine from scratch with all new components, as we have done with the engine shown here. 180BHP FIA App.K 1600 GTA race engine, built with all new Alfaholics parts	Price: £POA (ex VAT)
	GTA Dunlop Front Disc Premium quality Alfaholics production, cast and machined in the UK!	Price: £195.00 each (ex VAT)
	Ferodo DS2500 Pads to fit Dunlop Front Caliper Alfaholics production, the ultimate fast road/trackday/rally pad for Dunlop calipers	Price: £92.95 (ex VAT)
	Ferodo DS3000 Pads to fit Dunlop Front Caliper Alfaholics production, the ultimate race pad for Dunlop calipers	Price: £103.95 (ex VAT)
	Dunlop Front Brake Pads Direct fitment Dunlop front pads, available in fast road version or race version.	Price: £62.50/£72.50 (ex VAT)
	Dunlop Caliper Piston & Hydraulic Seal Kit Premium quality Alfaholics production. CNC machined race quality lightweight s/s pistons and hydraulic seals. These kits are perfect for all Dunlop caliper cars, but are especially good for competition cars. The pistons’ thin wall and hollow design not only ensures weight is reduced as far as possible, but also results in much improved heat dissipation. The hydraulic seals are CNC machined from the highest quality hydraulic specific rubber. Sold per pair for 1 caliper	Price: £75.00 (ex VAT)
	GTA/TZ 125mm Tacho – Electronic Version This superb unit is an excellent replica of the famous Jaeger GTA/TZ rev counter, manufactured with a very high quality modern electronic movement for perfect accuracy. It features a tell tale needle which can either be set to show the maximum revs you have reached since reset, or to hold the peak revs for 2 seconds after a gearchange and then drop down to match the current revs. It features 2 separately adjustable shift lights as an additional feature.	Price: £550.00 (ex VAT)
	1600 GTA Under Dash Courtesy Light Correct production courtesy light for GTA and also 101 series cars.	Price: £84.95 (ex VAT)
	Alfaholics GTA Inner Door Closing Strap Premium quality Alfaholics production. Exact replica of original door straps fitted to both 1300 & 1600 GTAs which so often are now missing from the cars. The strap is constructed as original with a sprung steel inner section with a durable woven moulding on the outside. The aluminium mounting plates are CNC machined from billet 7000 grade aluminium resulting in a far superior fit between the base and the cover capping than that originally achieved with Alfa’s cast components. The cover cap is polished to a show quality shine.	Price: £250.00 (ex VAT)