Panels for 1300 & 1600 GTA

Alfaholics 1300/1600 GTA Aluminium Front Wing

£1,495.00 GBP (ex vat)

RCE8006S

Brand new production exclusive to Alfaholics, unrivalled quality! We recently bought an unrestored 1600 GTA with perfect bodywork from a private collection and used this unique opportunity to make a new production of front and rear GTA wings. Working exclusively with the official prototyping factory for Aston Martin, Bentley & Spyker, moulds were taken directly from all 4 wings on this GTA to create perfect resin bucks from which to manufacture the wings. This is the same process that is used to make runs of prototype cars and small runs of production cars for Aston Martin, Bentley...

Alfaholics GTA Aluminium Rear Wing

£1,495.00 GBP (ex vat)

RCE8006R

These wings are available in either the correct deep rear arch height for 1600 GTA & Sprint GT or the later shallow 1300 GTA & later GT versions. Please specify which version is required when ordering. Brand new production exclusive to Alfaholics, unrivalled quality! We recently bought an unrestored 1600 GTA with perfect bodywork from a private collection and used this unique opportunity to make a new production of front and rear GTA wings.

Alfaholics GTA Roof Skin

£2,600.00 GBP (ex vat)

GTA001

Brand new production exclusive to Alfaholics using our superb aluminium panel factory. Perfect quality and fit featuring drip rail and screen recess details. Aluminium A & C pillar production currently under progress to join this roof to our wings.

GTA Aluminium Base of Rear Screen Panel

£795.00 GBP (ex vat)

PNL028/1

Premium quality Alfaholics production.

Aluminium A-pillar - Pair

£375.00 GBP (ex vat)

GTA002

New production of Aluminium a-pillar skin for GTA, to go with our roof skin. Exclusive to Alfaholics using our superb aluminium panel factory.

Aluminium C-pillar - Pair

£385.00 GBP (ex vat)

GTA003

New production of Aluminium C-pillar skin for GTA, to go with our roof skin. Exclusive to Alfaholics using our superb aluminium panel factory.

Alfaholics GTA Aluminium Bonnet

£2,595.00 GBP (ex vat)

RCE8203

Brand new production, exclusive to Alfaholics and made to the very highest standards. We laser-scanned a new old stock steel step front bonnet to enable us to CNC machine a solid resin tool for pressing the aluminium frame to ensure perfect accuracy. The skin is precision hand wheeled and then fitted to the frame which features all the factory pressings and captives. By making the skin and the frame from aluminium, the bonnet is very light. A race version is also available with swage-punched holes in the frame for additional weight saving.

Aluminium Bootlid

£575.00 GBP (ex vat)

PNL016

Complete aluminium skin and frame - 2.5KG

Door skin - Aluminium

£250.00 - £500.00 GBP (ex vat)

PNL045

Premium quality aluminium GTA door skin.

GTA Aluminium Front Panel

£775.00 GBP (ex vat)

PNL009/4

Pressed item, good quality.

GTA Aluminium Scuttle Panel

£335.00 GBP (ex vat)

PNL-GTA-ASP

New reproduction pressed aluminium GTA scuttle panel weighing just 528 grams, nearly 1kg weight saving over the steel pressing.

GTA Aluminium Rear Panel

£450.00 GBP (ex vat)

PNL013

Pressed item, good quality.

GTA Aluminium Rear Panel Inner Support

£395.00 GBP (ex vat)

PNL028/2

Premium quality Alfaholics production

GTA Aluminium Spare Wheel Well

£1,050.00 GBP (ex vat)

GTA102

Premium quality Alfaholics production. Available as correct shallow version spare wheel well without flat by inner wheel arch to suit 1600 GTAs or deep version to suit 1300. Please select.

GTA Aluminium Spare Wheel Well - Flat bottom

£1,050.00 GBP (ex vat)

GTA102/1

Deep wheel well as per 1300 GTA but with dome removed from bottom. Useful to race cars where dome not required to carry spare wheel and especially useful for LHD cars wishing to mount a fuel cell into the spare wheel area.

1967 Homologation GTA Blister Arches

£350.00 GBP (ex vat)

PNL042/1

New Alfaholics production, premium quality pressing. These are a direct copy of the arches Autodelta had homologated for the 1967 season to give increased clearance at the rear of GTAs with 7" wheels fitted. We used an original set of arches we had from Richard?s ex-Chiti GTA to make this production to ensure a faithful replication was possible. These can be fitted to both early deep arch GT as well later shallow arch GT. Fitting these allows the rear track to be increased by 10-15mm per side.

1969 Homologation GTA Arch Extension Set

£275.00 GBP (ex vat)

RCE8150

Premium quality Alfaholics production. These fibreglass arches have been made from a set of original Autodelta moulds that Richard Banks acquired over 20 years ago, which we recently discovered in our Devon warehouse! These arches can be found under the part number 105.59.54.109.00/110.00 and are listed under the 1969 homologation sheets for the 1300 GTA and under the 1970 homologation sheets for the 1600 GTA. Fitting these arches provides a very simple, neat and attractive way of fitting GTAm type wheels, such as our new Alfaholics 8x15" GTAm wheel.

1750/2000 GTAm Group 2 GRP Wing Set

£625.00 GBP (ex vat)

RCE8157/1

Premium quality Alfaholics production to fit all late GT. We have made these arches due to the poor quality of other productions on the market. Having spent a huge number of hours shaping, filling and preparing a set of those arches fitted to a car to get it ready for paint, we decided to take moulds directly off the car to preserve all this work for future builds and of course to enable us to supply a high quality set of arches to customers. This road weight set are finished in white gel coat and are strong whilst also being lightweight - each rear wing weighs 1.6KG.

1300 GTA Group 2 GRP Wing Set - Road

£625.00 GBP (ex vat)

RCE8157

Premium quality Alfaholics production to fit all step-front GT. We have made these arches due to the poor quality of other productions on the market. Having spend a huge number of hours shaping, filling and preparing a set of those arches fitted to a car to get it ready for paint, we decided to take moulds directly off the car to preserve all this work for future builds and of course to enable us to supply a high quality set of arches to customers. This orad weight set are finished in white gel coat and are strong whilst also being [?]