Panels and panel race parts for 105 Series Alfa Romeo

Alfaholics Carbon Fibre Bonnet – GT Early

Alfaholics Carbon Fibre Bonnet – GT Early

£1,450.00 GBP (ex vat)

RCE8201

Manufactured from moulds taken from a lacquered finish new ‘old stock’ early steel bonnet. Proper ‘pre-preg’ carbon fibre component resulting in a super lightweight and rigid bonnet.

Alfaholics Carbon Fibre Bonnet - GT Late

Alfaholics Carbon Fibre Bonnet – GT Late

£1,625.00 GBP (ex vat)

RCE8200

Manufactured from moulds taken from a lacquered finish new ‘old stock’ late steel bonnet.

Proper ‘pre-preg’ carbon fibre component resulting in a lightweight and rigid bonnet.

Alfaholics Carbon Fibre Bootlid - GT

Alfaholics Carbon Fibre Bootlid – GT

£1,095.00 GBP (ex vat)

RCE8230

1.4kg. Proper ‘pre-preg’ carbon fibre component resulting in a super lightweight and rigid bootlid.

Manufactured from moulds taken from a lacquered finish new ‘old stock’ steel bootlid.

4.2kg weight saving over original steel equivalent.

Alfaholics Carbon Fibre Door (Late)

Alfaholics Carbon Fibre Door (Late)

£2,995.00 GBP (ex vat)

RCE8220

Proper ‘pre-preg’ carbon fibre component resulting in a super lightweight and rigid door 2.8kg. Manufactured from moulds taken from a lacquered finish new ‘old stock’ steel door. Exact copy of original S2 door with wire lifter style window mechanisms with all correct original fixings, including wheels for the wires. This means this door can be built up with all original door mechanisms resulting in a very lightweight door but with no compromise to usability or wind noise – the ultimate door for the fast road / track day market! Represents a 9kg weight saving over an original steel (European version) door. This door (unlike some carbon door productions) includes every single factory internal stiffening bracket which are critical to control the alignment of the a-pillar and thus door to body shell, this makes the door twice as time consuming to manufacture, but we consider this work critical to get a finished door of the right quality.

We recommend converting away from traditional GT door seals to a knock on door seal (similar to Saloon/Spider), the lightweight doors do not have the required inertia to shut a stiff factory type door seal. Moving to a knock on door seal will result in Spider (and dare we say Porsche!) quality door shut. We have bespoke made a special extrusion to get exactly the profile size and foam construction we want for our GTA-R builds and have this available to purchase as an add on to your door order.

Alfaholics Carbon Fibre Group 2 Wing (Sets) - GTAm

Alfaholics Carbon Fibre Group 2 Wing (Sets) – GTAm

£1,995.00 – £2,250.00 GBP (ex vat)

RCE8157/2C | RCE8157/1C

GTAm Group 2 Carbon Fibre Wing Set.

Produced to the same exacting standards as all other Alfaholics Carbon Fibre products, these single skin wings weigh 1.4kg per set.

Despite being considerably lighter than our more traditional GRP variant these wings are more rigid.

Ideal for competition use (where allowed) or just as a great weight saving on your GTAm themed 105 build.

Fibreglass Bonnet - GT

Fibreglass Bonnet – GT

£495.00 GBP (ex vat)

RCE8100E | RCE8100L

Manufactured from moulds taken from a lacquered finish new ‘old stock’ steel bonnet ensuring the best fit.

Available for both step-front and late GT.

  • 6.7kg early
  • 7kg late
Alfaholics Glass Fibre Bootlid - GT

Alfaholics Glass Fibre Bootlid – GT

£350.00 GBP (ex vat)

RCE8110

Manufactured from moulds taken from a lacquered finish new ‘old stock’ steel bootlid ensuring the best fit.

Fibreglass Door - GT

Fibreglass Door – GT

£625.00 GBP (ex vat)

RCE8120

Manufactured from moulds taken from lacquered finish ‘new old stock’ steel doors ensuring an exact fit.

Supplied as standard to be compatible with the Alfaholics Sliding Window Kit so will not take the standard 1/4 light frame and rear glass metal channel.

Fine outline of original door handle on door skin as well as drill centres for GTA button / hoop handle on each door to allow you to accurately fit which ever door opening you wish to use.

Group 2 GRP Wing (Set) - 1750 & 2000 GTAm

Group 2 GRP Wing (Set) – 1750 & 2000 GTAm

£775.00 GBP (ex vat)

RCE8157/1

Having spent a huge number of hours shaping, filling and preparing a set of those arches fitted to a car to get it ready for paint, we decided to take moulds directly off the car to preserve all this work for future builds and of course to enable us to supply a set of arches to customers.

This road weight set are finished in white gel coat and are strong whilst also being lightweight.

Fibreglass 1/2 Fuel Tank

Fibreglass 1/2 Fuel Tank

£250.00 GBP (ex vat)

RCE8156

Lightweight 1/2 tank, perfect for use with our 55L fuel tank above and only weighing in at 1.4kg.

Can be used as a sump for mounting fuel pump, filter & pressure regulator and also acts to stop air getting trapped in the rear panel and slowing the car down on fast straights.

Fibreglass Spare Wheel Well

Fibreglass Spare Wheel Well

£295.00 GBP (ex vat)

RCE8155

Manufactured from moulds taken from a lacquered finish wheel well.

This ensures that these are the best quality fibreglass wheel wells.

2.3kg (2kg weight saving over the original steel version).

GTA-R Carbon Fibre Wheel Well

GTA-R Carbon Fibre Wheel Well

£950.00 GBP (ex vat)

RCE102-C

Carbon fibre spare wheel well, 2.7kg weight saving over steel, as fitted to our latest GTA-R builds

Alfaholics Carbon Fibre Lower 1/2 Fuel Tank

Alfaholics Carbon Fibre Lower 1/2 Fuel Tank

£950.00 GBP (ex vat)

RCE8156-C

Carbon fibre version of our 1/2 tank, used for mounting fuel pump, filter and regulator discretely in the boot by the fuel tank sump.

The carbon fibre 1/2 tank represents a 500g weight saving over our fibreglass version.

As used in our latest GTA-R builds.
 

Rear Numberplate Light Plinth - GTA

Rear Numberplate Light Plinth – GTA

£50.00 GBP (ex vat)

RCE1013

An exact copy with correct dimensions.

GTA-R Door Hinge Set (Aluminium)

GTA-R Door Hinge Set (Aluminium)

£1,075.00 GBP (ex vat)

BILL/HINGE

CNC machined billet aerospace grade aluminium door hinges, 3D laser scanned from original parts for accuracy.

Factory hinges are now +40 years old, they have been rebushed (often several times) and have depreciated due to being bent, damaged, cracked and bores worn oval. These reduces the shut quality of the doors and can create alignment and body clearance issues.

The hinges come as a set of 4, in clear anodised finish and are supplied with a full set of 32 bolts and a selection of shims allow you to shim door angle easily as part of your body restoration/reassembly.

As fitted to all new GTA-R restorations.

Alfaholics Lightweight Step Front Bonnet Hinge (Set)

Alfaholics Lightweight Step Front Bonnet Hinge (Set)

£175.00 GBP (ex vat)

PNL122

Step-front bonnet hinge set. Manufactured in steel and drilled for weight saving and looks.

Supplied bare, ready to paint your body colour.

As fitted to our GTA-R 290 project.

Alfaholics Lightweight Boot Hinge (Set)

Alfaholics Lightweight Boot Hinge (Set)

£209.95 GBP (ex vat)

PNL121

Manufactured in steel and drilled for weight saving and looks.

Supplied bare, ready to paint your body colour. They are supplied with the brackets for attaching boot lifting springs separately, so you can chose whether you want to use lifting springs or not.

As fitted to all our GTA-R 290 & 300.

1969 Homologation Arches (Extension Set) - GTA

1969 Homologation Arches (Extension Set) – GTA

£275.00 GBP (ex vat)

RCE8150

These fibreglass arches have been made from a set of original Autodelta moulds that Richard Banks acquired.

These arches can be found under the part number 105.59.54.109.00/110.00 and are listed under the 1969 homologation sheets for the 1300 GTA and under the 1970 homologation sheets for the 1600 GTA.

Fitting these arches provides a very simple, neat and attractive way of fitting GTAm type wheels, such as our Alfaholics 8×15″ GTAm wheel.

Chassis Leg Stiffening Kit

Chassis Leg Stiffening Kit

£275.00 GBP (ex vat)

MSC010

This kit greatly stiffens the front chassis legs on all 105/115 series Alfa models, which is a renowned weak point on the cars. When restoring body shells, we often observe cracked or squashed front chassis legs, and this no doubt contributes to the propensity of these cars cracking steering box cases. We developed this kit originally for our GTA-R and race car builds, but now install these on virtually all our restorations.

These plates are laser cut from the same T45 grade steel that we use in our rollcages, which has far stiffer properties than normal bodywork steel, thus greatly improving the rigidity of these plates. We pre-cut holes throughout the plate to ensure you can puddle weld the entire plate to the chassis leg for maximum rigidity. A must for any full restoration!

Bonnet / Boot Pins

Bonnet / Boot Pins

£35.00 GBP (ex vat)

RCE7005

Most bonnet pins are designed for modern cars so look clumsy on historic vehicles, others operate badly and can damage paintwork.

These pins have been carefully selected by Alfaholics to retain a period look, with neat fitment and easy use.

As used on Max’s GTA Replica. Priced per 1 bonnet or boot.