Chrome (Coupe)

Door mirror – round style. Fits either side of the car and includes a small Alfa logo on the back. The mirror comes complete with grommet to be fitted to the base of the mirror. Base size approx 10.8 x 2.4cm.

Door mirror – round style. Fits either side of the car and without Alfa logo on the back. The mirror comes complete with grommet to be fitted to the base of the mirror. Base size approx 10.8 x 2.4cm.

Joining piece to fit screen surround GT and GTV models.

Reproduction stainless steel finisher for the interior where the rear C-pillar meets the base or rear side window. To suit all 105 series coupes.

Grommet to suit chrome round door mirror.

Door mirror – oval style. Fits either side of the car and includes a small Alfa logo embossed on the stalk. The mirror comes complete with a rubber grommet to be fitted to the base of the mirror /against the body, fitting screws also included. Base size approx 11cm x 2.6cm.

Premium quality Alfaholics production! We have manufactured this GTA centre heart by manufacturing a bespoke press tool in the same method that Alfa did in period. After pressing, the part is hand polished to give a superb quality gloss and shine. As fitted on all our latest GTA-R builds and GTA restorations. We were forced to produce this part because of the sub-standard quality and general supply issues of the modified second hand Giulia saloon ones as offered out of Europe.

New production – premium quality to suit all Step-front GTs. Be aware of cheaper quality productions that don’t fit the top of the front panel properly.

Will also fit Sprint GT, GTC, GT Junior and Sprint GTV.

New reproduction chromed die-cast centre heart, nice quality.

Full kit of 3 parts. Excellent Alfaholics production.

Alfaholics production, superb quality! Manufactured from marine grade stainless steel and polished to a show quality finish.

Each piece is assembled in a complex jig to ensure the perfect accuracy of shape. Also correct for Giulia GTC.

Brand new production exclusive to Alfaholics, unrivalled quality! Manufactured using a perfect original grille kit on one of our 1600 GTAs as a template. This is the first kit from our new production which is manufactured along side factory grilles for Bentley & Spyker using identical methods to these motor manufacturers! The unique manufacturing methods employed not only allow for a much finer stainless steel edge beading, as original, but also result in perfectly accurate curvature top and bottom. The lower grilles are also a direct copy of an original, enabling these grilles to be fitted to original GTAs using the original mounting holes that screw through the frame of the grille. The corner blanking plates are laser cut ensuring perfect accuracy & fit.

Template for lower grille position & size included with grille kit. Fit the Best!

Alfaholics production. GTA-style mesh grille kit to suit late non-step front GTs with 4 headlights. Manufactured from marine grade stainless steel and fully polished. Can be used to transform all late cars with to GTA-style looks.If using a 2000 GTV or GT Junior ‘Unificato’, a 1750 centre heart is also necessary and can be supplied. Standard kit includes main mesh grille parts for each side of centre heart & aluminium blankers for between the headlights or you can upgrade to mesh blankers.

Mesh grilles for GTA lower oval air intake modification for GTA Style Mesh Grille Kit – Can be used on both early and late model 105/115 GTs.

GTA style mesh grille kit for non-step front GT Junior 1971-1974. Manufactured from marine grade stainless steel and fully polished. Can be used to transform all late Juniors with 2 headlights to GTA-style looks. Standard kit includes main mesh grille parts for each side of centre heart – £295. Option for mesh grilles for GTA lower oval air intake modification – £60 pair.

Excellent reproduction of the 1750 GTV & GTAm side grilles, made in aluminium. The mesh pattern is slightly larger than the original design.

Alfaholics production, direct copy of original Autodelta inner headlight mesh. We have made 2 versions, one to fit Giulia saloon and the other to fit later 4 headlight GT/GTV. The Giulia saloon version will fit both 1st series Ti style grille and 2nd series Giulia Super headlight chrome surrounds.

Polished stainless steel front number plate. Dimensions 28cm x 7.5cm.

GT Junior bumper join covers, non step front.

Chrome front bumper joiner to suit late cars.

Both front and rear bolts are available. Please select, priced per bolt.

Plastic spacer block to fit between body of car and bumper on all late 105/115GT. To fit, Mk2 1750 GTV, 2000 GTV, 1300/1600 GT Junior after 1970. Sold as a pair.

Clip for mounting the grille.

Excellent quality ashtray as fitted to GTA, early GT Junior, some 101 Giulia (1600cc) cars and some 102 series cars.

1750 GTV Mesh – Alfaholics production!

1750 GTV Mesh Grille Stainless Steel Bars – Alfaholics production!

Chromed/polished metal boot release handle with a matching pair of keys to fit all 105 Series GT/GTVs & Spiders up to 1972.

Outer door handles to suit all GTs, GTVs, GTCs and GTAs with matching keys. Made from the original tooling.

Reproduction door handle lock cylinder (barrel) set to suit one car, complete with a matching set of 4 keys, lock plates springs and clips.

GT outer door handle seal. Not an original fitment to the cars when they were new, but a popular addition nowadays to protect the paintwork around the door handle opening and reduce water ingress to the doors.

Mounting bracket for all Bertone GT/GTV outer door handles 1964-1977. Two required per car.

Our first production of GTA door buttons several years ago was a huge success since customers were delighted with the fact that they fitted perfectly, unlike the sub-standard Italian reproduction item which is still commonly available on the market. The problem was that we could not source enough Alfa lock mechanisms to satisfy demand!

We, therefore, went back to the drawing board and designed a new button from scratch, which would use a high-quality modern type of barrel lock. The button (with flat as original) and the body is CNC machined from aircraft grade aluminium to maintain tight tolerances and therefore ensure smooth and high-quality operation. Both are then polished to a mirror finish. Using aluminium also results in a 50% weight saving over a chromed brass button!

These Alfaholics buttons are offered as a matching pair with keys. This eliminates the need to make the tricky modification to the passenger door mechanism, to allow the door to lock from the inside.

Hoop handle, Alfaholics production.

Also fits some saloons.

Alfaholics production, a copy of original GTA aluminium inner door opening handle. The original parts were cast from a soft aluminium that caused the splines to wear out very fast and as a result are now most often missing and replaced with cast Mazak chrome GT parts. We 3-D scanned an original part to create a CAD model, from that data we CNC machined the parts from ultra hard aircraft grade aluminium, with final high-quality polishing to finish the items.

Small grub screw for interior handles – both door and window winder handles – for almost all 105 series cars.

Inner door handle – early

• All Sprint GTV
• All GTJ up to 1973
• All 1750 GTV

Great quality inner door handle to suit all 2000 GTV & GT Junior after 1973 & Spiders from 72-86.

Circular black plastic backing ring to be fitted behind the door handle and window winder on later 105s from 1972 onwards.

Window winder – early – All Sprint GT/V, all GTJ up to 1973, all 1750 GTV.

Great quality chromed window winder to suit all 2000 GTV, GT Junior after 1973 & Kammtail Spiders from 72-86.

Reproduction chrome quarterlight pivoting glass frame set to suit all 105 series coupes.

Alfaholics production, superb quality! CNC machined from billet 7000 series aluminium and polished to a mirror shine. We have produced this fabulous kit of parts as so often they are in poor condition and let the finish quality of a restored car down.

The part which fits in the quarterlight frame was originally cast from Mazak so it not possible to re-chrome. We have engineered a much tigher tolerance on the hinging system, as it is usually a sloppy fit here which causes the quarterlight to wobble around when in an open position and result in the button unscrewing. We achieved this by machining a black nylon bush to fit in the part on the outside of the glass and a stainless steel pin to press into the part which fits in the quarterlight frame resulting in a tighter fit between the components. We have also cast the rubber top hat which fits through the glass itself.

Rather than using a difficult riveting system for attaching the part to the quarterlight frame, we have tapped the holes so that neat little M3 button head bolts can be used allowing very easy installation of this product. Priced as a complete kit of parts for 1 window.

Replacement grommets for the often perished quarterlight rubbers. Sold as a set.

New, good quality reproduction quarterlight window winder for Early 105 Series GT/GTV.

Alfaholics production, 3-D scanned from an original part to create a CAD model, from that data we CNC machined the parts from ultra-hard aircraft grade aluminium, with final high quality polishing to finish the items – super high quality!

Excellent quality rear side window catches for all GTs and GTVs from early Sprint GTs onwards. This does not include the outer domed piece or the retaining clip, just the inner catch mechanism.

Button for fixing 3/4 window catch the glass. Comes complete with a circlip.

Set of small rubber grommets to go between the latch mechanism and the glass on the rear side windows.

For all GT Junior with 1750 style dash and no centre console, also Montreal.

For all cars centre console where fascia sits vertically – 1750 & 2000 GTV, 1750 & 2000 S2 Spider, all S3 Spider.

Available in premium (polished metal) or plastic.

Heater control slider knob in both – chromed plastic and Black.

Angled instrument holder for late GT Junior and 1750 GTV. Fits left and right hand drive cars.

An excellent new production of the chrome gear lever gaiter frame to fit 1750 GTV centre consoles which includes the cast Alfa part number!

An excellent new production of the chrome gear lever gaiter frame to fit 2000 GTV centre consoles.

Premium quality Alfaholics pressed production. Correct for all 105 Series GT 1963-1970 and also possible to use on later 105 GT for improved looks.

All GT after 1970.

Rear number plate s/s frame – all cars after 1970

Reproduction early (1963-67) one-piece boot chrome to suit Sprint GT, Sprint GTV & GTCs.

Stainless Steel finisher for boot opening. Handed, 2 required.

Boot lock striker plate to suit GT.

Boot release handle.