Fuel parts for 750/101 Giulietta Alfa Romeo
£115.00 GBP (ex vat)
FUL2001 | FUL2002
Set of four CNC machined from billet aluminium carburettor mounts.
Fits 105 and 116 series cars up to 1985 with mounts that bolt into the manifold from behind.
The kit is supplied complete with studs pre-fitted in the mounts, ‘O’ rings, Thackery washers and nyloc nuts.
Over time, the original rubber mounts crack and leak air causing the mixture to weaken and consequently the engine to run roughly. Even the replacement reproduction rubber mounts have been known to crack prematurely and this has led us to manufacture these billet aluminium items for use as a direct replacement.
They use rubber ‘O’ rings to form a perfect seal between the mount and the carburettor. These rubber ‘O’ rings, together with Thackery washers (included in the kit), provide each carburettor with the necessary damping from engine vibrations.
This ‘O’ ring set-up is used widely for racing as it is considered to be the most effective and reliable method of carburettor mounting.
£19.95 – £39.95 GBP (ex vat)
FUL016 | FUL017
Standard quality reproduction carburettor rubber mount, priced per unit, four required per car. NOTE, we recommend fitting the more durable aluminium type mounts for reliability and increased service life.
£0.55 GBP (ex vat)
Paper gaskets for each side of carb mounts.
Eight needed for rubber gaskets, four needed when using our aluminium carb mounts.
£5.95 GBP (ex vat)
Inlet manifold gasket to fit all twin carburettor 105 series cars 115 & 116 engines.
Not for fuel injected 115 series cars except Spica.
£399.00 GBP (ex vat)
Weber type 151 is the universal performance 40 DCOE, tune-able, and one of the most popular WEBER carburettors for tuners, high-performance engine builders and classic/sports car restorers.
Brand new, price per carburettor, two required per car.
£399.00 GBP (ex vat)
The Weber 45 DCOE type 152 is the universal, performance 45 DCOE, infinitely tune-able, and possibly the most popular Weber carburettor for engine tuners, high-performance engine builders, and classic/sports car restorers.
The carburettors have a cable-operated choke fitted and come jetted well as a base point for 2.0L engines however, we recommend that you have the car set up and tuned on a rolling road to ensure optimal performance.
£11.95 GBP (ex vat)
Reproduction fuel inlet ‘T’ piece fuel union to suit all twin side draught carburettors on 105 series cars.
Ideal for 45mm carburettors but can also be used on 40mm versions.
£11.50 GBP (ex vat)
Reproduction of genuine Weber top jet cover to suit all Weber DCOE carbs. Two required per car, priced individually.
We recommend changing the jet cover gaskets at the same time, see related products.
£1.25 GBP (ex vat)
New gasket for the top jet cover on all Weber DCOE carburettors.
£260.00 GBP (ex vat)
Reproduction Ram Pipe of the “trumpet” style used on GTA Corsa cars in period.
The trumpets can be set at any angle you wish to alter the ram effect of the air intake and come complete with a base plate and locking rings.
£24.00 GBP (ex vat)
Pair of rampipe socks made to fit perfectly over individual trumpets to prevent valve seat damage from dust. Best suited for use with GTA curved ram pipes or similar.
The single sock is designed to fit the most popular forms of trumpets and rampipes. Always make sure that the distance between the top of the trumpet rampipe and the inside of the top of the filter is no less than 20mm.
£75.00 GBP (ex vat)
Higher quality replacement for the standard and now unavailable Fispa pressure regulator, complete unit with filter.
The Filter King fuel pressure regulator has been designed to improve the carbuettor seeding system. Fuel flow is steady and constant at any weather, ambient, and driving conditions, thanks to its wide and sensible diaphragm inside the system, this prevents overload, stalling or starvation of the engine.
Filter King avoids these problems by reducing and regulating the fuel pressure, with a perfect idle, immediate and fast start of engine. The vehicle will run smoother without loss of performance at high rpm, as the pressure to carburettor will be set for the max engine power, plus additional safety percentage, according to the size of the needle valve. Filter King is manufactured with the best materials, by accurate machining and quality controls.
£79.95 GBP (ex vat)
FUL031 | FUL031/45
Pipercross Ram Pipe set recommended for use with the Alfaholics Single Filter.
£29.95 GBP (ex vat)
Mechanical fuel pump for carburettors cars includes two gaskets. Please make sure you have the plastic spacer before fitting. This is the best production mechanical fuel pump on the market.
£9.95 GBP (ex vat)
Laser cut aluminium blanking plate for blanking off the block when using an electric fuel pump.
£4.50 GBP (ex vat)
Fuel filter for standard Fispa pressure regulator with glass bowl.
£48.00 GBP (ex vat)
Ideal for balancing carburettors – Rubber adaptor pipe available for easy use on cars fitted with standard airbox.
£19.95 GBP (ex vat)
Adjustable length metal rod allows you to adjust for full throttle actuation!
To replace the usually poor condition and bendy standard plastic item.
Requires metal ball fitting ends which are available separately, see related products.
£4.95 GBP (ex vat)
Metal end complete with internal circlips, for use as an option with adjustable throttle rod.
£2.50 GBP (ex vat)
£7.95 GBP (ex vat)
Pair of fuel pump mounting rubbers used in series 4 Spider and Alfa Romeo 75. Using these rubbers will reduce the vibration and noise generated by the fuel pump. Can be used with all facet fuel pumps. Sold as a pair.
£38.00 GBP (ex vat)
Correct more shaped version for all 105/115 models.
Featuring the correct shape to allow full throttle.