Interior and Trim race parts for 105 Series Alfa Romeo
£440.00 GBP (ex vat)
Full kit to cover the complete interior firewall, tunnel, floor pans and inner door cavities, as advised by Alfaholics to transform the sound deadening and heat insulation of your car with optimum results. A must for all full restorations! As fitted to all Alfaholics GTA-R builds. Comes with a free application roller to get the neatest installation results.
£465.00 GBP (ex vat)
As above kit but using Dynamat’s latest Superlite Xtreme sound insulation product which is 30% lighter than their standard Dynamat Xtreme product. Great for use on performance cars where minimising vehicle weight is important. As used in our GTA-R 270 builds. Comes with a free application roller to get the neatest installation results.
£195.00 GBP (ex vat)
Highest efficiency energy conversion sound deadened on the market! Self adhesive, elastomeric synthetic rubber with a 4 mil aluminium constraining layer. VECTOR ™ chemistry directs the energy causing the noise into silent energy to mute the sound. The results are incredibly impressive. This pack includes 9 sheets each 457mm x 812mm.
£220.00 GBP (ex vat)
As per above kit, but using Dynamat’s latest technology VECTOR material which is 30% lighter than the standard Xtreme product. Each pack includes 12 sheets of 475mm x 812mm dimension.
£58.00 – £99.95 GBP (ex vat)
DYN11101 | DYN11102 | DYN11103
Dynaliner is the most effective automotive thermal insulator. It is a soft, self-adhesive closed cell rubber that is resistant to both oil and water.
It is the closed cell form that is so crucial to its effectiveness – most alternative brands use cheap open cell foam, which is far less effective at absorbing heat.
It also acts as a superb under carpet padding material, and its closed cell nature again adds benefit by making it extremely durable. Unlike traditional under carpet materials, it will not hold moisture (which is the no.1 reason the floor pans rust out on Alfa Romeos!).
Sheet size 813mm x 1372mm sheet.
£14.95 GBP (ex vat)
2mm aluminum finishing tape to be used when fitting our Dynamat kits to seal seams & attach wiring.
£9.95 GBP (ex vat)
Roller tool to help apply all Dynamat products to get the smoothest and neatest results, as used in the Alfaholics workshops!
£3,695.00 GBP (ex vat)
We have developed this superb air conditioning system allowing you to drive your 105 series Alfa in comfort, whatever the weather! As developed for Alfaholics GTA-R 009 for Dubai market and now fitted on many GTA-R and other Alfaholics workshop builds.
The system uses a bespoke designed heater box, featuring both an air conditioning evaporator and a heater matrix, which replaces the original unit and mounts to the normal fixing points under the dashboard. The air conditioning pump is operated using a simple on/off switch, whilst the two original cable controls and fascia panel are retained. The temperature control lever regulates the flow of hot water through the heater matrix and can therefore be used to blend warm air into the cool conditioned air in order to achieve the desired temperature. Blended air can then be directed either to the dashboard or to the footwell using the direction lever. The heater box has the same size air outlets as the 2nd series heater boxes fitted to most 105s, but it can also be adapted to work with the earlier style 4 dash-vent cars. We now also offer separately 2 different sizes of billet air vents that can be fitted into both early and late dashboards to complete the installation as done on Alfaholics GTA-R builds.
The air conditioning pump is the very latest compact high-efficiency unit which enables a neat installation under the bonnet. The kit comes with mounting brackets to fit the pump on a Twin Spark engine down low on the inlet side to keep the unit as hidden as possible using the standard crank pulley as per the majority of our GTA-R builds. A Nord fitting kit is also available, which comprises mounting brackets for the pump and a billet aluminium crank pulley with the second belt position required to run the pump, in Nord application the pump is fitted up high on the exhaust side of the engine as per US market factory a/c cars. The condenser unit is thin and compact and therefore minimises disruption to air flow through the water radiator.
The kit is supplied complete with heater/evaporator box, pipes, unions, toggle switch, pump, drier bottle, condenser, electric fan & trinary switch, as well as plumbing and wiring diagrams to ensure the kit operates correctly. The kit needs to be installed by a competent professional with experience fitting air conditioning kits or by a skilled engineer enthusiast with similar previous experience with air conditioning.
Please note that on late 105/115 GT and Spider with factory steel shrouding in front of the radiator that you need to cut holes in the shrouding to pass the air conditioning pipes through. We regret that on Giulia Saloons, there is not enough space between the radiator and the front panel to physically install the condenser and fan unit due to the lack of frontal overhang/body space, thus making installation of this system not really viable.
£50.00 – £75.00 GBP (ex vat)
GAUGE2 | GAUGE3
£495.00 GBP (ex vat)
CNC machined billet aluminium air vent, suitable for use as either a fresh air vent or for use with our air conditioning system with a step front type dashboard. These vents are designed to complement the look of the stepfront instruments and fit in the smaller ‘dual gauge’ holes in the dashboard. We have moulded a specific dash face to replace the wood face type dash with 2 additional apertures next to the water/oil gauge to house 2 of these air vents, which can be bought as a separate item.
£495.00 GBP (ex vat)
CNC machined billet aluminium air vent, suitable for use as either a fresh air vent or for use with our air conditioning system with a step front type dashboard.
Following from the success of our beautiful aluminium air vent to fit step-front dashboards, we have made a smaller version to fit neatly in the veneer area of 1750 & 2000 GTV dashboard faces.
£895.00 GBP (ex vat)
RCE7010 | RCE7010/3 | RCE7010/2
Fully CAD designed and CNC machined from billet military specification aluminum and hard anodized. These are available as a direct replacement for each of the pedal versions fitted across the range of 105 series cars, namely LHD floor mounted, LHD hanging and RHD floor mounted. They all feature adjustable angle pedal pads, whilst the floor mounted versions also feature adjustable length pedal arms. Adjusted to their longer length, the pedal effort will be reduced, whereas adjusted shorter, the pedal effort will be higher but your foot travel decreases – perfect for race and track day cars. The RHD clutch pedal is machined with the appropriate mounting point for both cable and hydraulic actuation.
These pedals weigh 50% less than the original steel pedals. As a pair, this results in a 0.5kg weight saving!
£30.00 GBP (ex vat)
Nice quality cast aluminium grippy race pedal blocks for bolting to standard pedals, our preferred pedal set for use on Alfaholics built race cars. An excellent upgrade for performance driving to give more sure footed driving.
£28.00 GBP (ex vat)
Superb quality cast aluminium foot rest, our preferred model for use in Alfaholics built race cars. A must for all race & trackday cars to give support to the left foot when driving
£50.00 GBP (ex vat)
CNC machined billet aluminium item, directly interchangeable for original steel throttle stop. Also suitable for use as a clutch pedal stop for competition cars with race paddle clutches.
£475.00 GBP (ex vat)
Alfaholics production, a copy of original GTA aluminium inner door opening handle. The original parts were cast from a soft aluminium that caused the splines to wear out very fast and as a result are now most often missing and replaced with cast Mazak chrome GT parts. We 3-D scanned an original part to create a CAD model, from that data we CNC machined the parts from ultra hard aircraft grade aluminium, with final high-quality polishing to finish the items. Sold as a pair.
£245.00 GBP (ex vat)
Alfaholics production, copy of original GTA aluminium inner window winder handle. The original parts were cast from a soft aluminium that caused the splines to wear out very fast and as a result are now most often missing and replaced with cast Mazak chrome GT parts. We 3-D scanned an original part to create a CAD model, from that data we CNC machined the parts from ultra hard aircraft grade aluminium, with final high quality polishing to finish the items. Sold individually.
£225.00 GBP (ex vat)
Alfaholics production, 3-D scanned from an original part to create a CAD model, from that data we CNC machined the parts from ultra-hard aircraft grade aluminium, with final high quality polishing to finish the items – super high quality!
£350.00 GBP (ex vat)
Premium quality Alfaholics production. Exact replica of original door straps fitted to both 1300 & 1600 GTAs which so often are now missing from the cars. The strap is constructed as original with a sprung steel inner section with a durable woven moulding on the outside. The aluminium mounting plates are CNC machined from billet 7000 grade aluminium resulting in a far superior fit between the base and the cover capping than that originally achieved with Alfa’s cast components. The cover cap is polished to a show quality shine.
£225.00 GBP (ex vat)
6-piece kit to replace original panels. The rear side panels have been increased in size to account for cars not having rear seats or arch coverings fitted, and the front corner panels reduced to neatly cover only the pressed holes in the bodyshell. The door panels and rear side panels have been beaded due to their size to prevent them drumming. They are supplied plastic coated to protect them from being scratched in installation.
£25.00 GBP (ex vat)
Interior LED courtesy light in warm white, as used in our GTA-R builds.
£95.00 GBP (ex vat)
Headlining kit in correct Alfa materials – pre-tailored ready to fit.
£185.00 GBP (ex vat)
RCE7006 | RCE7006/4
Superb quality steering wheel, specifically selected by Alfaholics for its unrivalled ergonomic grip design, shape and size. As used exclusively in Alfaholics performance vehicles. Use with Alfaholics steering column extender for the ultimate driving position.
Please state if you require a Momo boss adaptor and the model/year of your car for this.
£185.99 GBP (ex vat)
350mm diameter genuine Momo Prototipo steering wheel.
£273.00 GBP (ex vat)
New design steering wheel by Momo styled on the legendary GTA Hellebore wheel and with a black leather rim to give nice comfort and grip level.
£215.00 GBP (ex vat)
New version of the legendary black spoke Prototipo steering wheel with a distressed leather rim in smooth grain finish and with the original MO-MO logo on the lower spoke. This brings the style & finish closer to that originally manufactured by Momo for Autodelta.
£250.00 GBP (ex vat)
Nardi 330mm race steering wheel. Perforated leather bound wheel, deep dished.
£75.00 GBP (ex vat)
Alfaholics production, premium quality CNC machined from billet aluminium. We have manufactured this item due to the increasingly poor quality of the existing Italian cast item available on the market. We found that on top of bad quality of the casting, the machining tolerances are sub-standard resulting in poor location on the taper shaft and keyway.
Our billet machined item erradicates these issues and comes finished in a superb black anodized finish complete with plated fixing bolts for the steering wheel.
£120.00 GBP (ex vat)
Quick release steering boss to allow instant removal of steering wheel – the ultimate theft deterent! This high quality item retains contacts for the horn push allowing retention of the horn on the steering wheel. Compatible with all aftermarket Momo/Nardo Steering wheels.
£52.00 GBP (ex vat)
The standard driving position of 105 Series Alfas leaves the steering wheel too far away in comparison to the pedals. This either leads to the steering wheel being too far away to control the car properly or leg clearance issues around the steering wheel. This CNC machined billet, aircraft grade aluminium extender is finished in high quality black anodizing and brings the steering wheel closer to the driver optimising the driving position, essential for fast driving. PCD suited to standard Momo/Sparco/OMP steering wheels.
£495.00 GBP (ex vat)
GTA011/3 | GTA011/3RHD
High-quality mould taken from an excellent condition dash. Ready to be painted or trimmed, as used in our Alfaholics GTA-R builds.
£495.00 GBP (ex vat)
GTA011 | GTA011/RHD
Perfect copy of original Autodelta fibreglass one piece GTA dash; tools were taken directly from the original dash, includes glovebox as the original. Now available in both Left and Right hand drive, please select.
Note – The right hand drive dashboard has no cut out for the glovebox, please see the picture.