Exhausts

Alfaholics Stainless Steel Sports Exhaust System

Alfaholics Stainless Steel Sports Exhaust System

£865.00 GBP (ex vat)

Superb quality, unrivalled on the market! Primary & secondary lengths and bores optimised on the dyno. With this system fitted the engine will rev much freer with higher rev capability and in the region of 10BHP increase and 8lb/ft torque. This system is so good that we have never managed to beat it in back to back tests; thus we use it both on our normal road cars as well as our full race 220BHP 2.0 Sprint GT Racer and our 185BHP 8,500rpm 1600 GTA Racer. 1 manifold version for 1300/1600 engine sizes with either cable or hydraulically operated clutch, LHD & RHD, hanging […]

More InfoAsk a QuestionAdd to Quote

Alfaholics Stainless Steel Sport Manifold

Alfaholics Stainless Steel Sport Manifold

£490.00 GBP (ex vat)

For all 105/115 Series GT both LHD & RHD, cable & hydraulic clutch. Note – for late hanging pedal LHD 1600 cars, please order 1750/2000 shallow floor system for increased clearance to floor pan.

More InfoAsk a QuestionAdd to Quote

Alfaholics Stainless Steel Sports Exhaust for Twin Spark Conversions

Alfaholics Stainless Steel Sports Exhaust for Twin Spark Conversions

£865.00 GBP (ex vat)

Superb quality, unrivalled on the market! Primary & secondary lengths and bores optimised on the dyno. With this system fitted the engine will rev much freer with higher rev capability and in the region of 10BHP increase at max power and 8lb/ft torque. We have back to back tested this system with the CSC mild steel system and found our system has a 15BHP advantage @ 4,500 rpm! To suit all 105 models with hydraulically operated clutch, both LHD and RHD, hanging or standing pedals. Conversion for mechanically operated clutch cars reasonably simple. 3 different link pipes to suit the 3 chassis lengths of […]

More InfoAsk a QuestionAdd to Quote

Alfaholics Stainless Steel Under Axle Conversion for GT/Giulia

Alfaholics Stainless Steel Under Axle Conversion for GT/Giulia

£395.00 GBP (ex vat)

Race under axle conversion for our stainless steel sports exhaust. Suitable for all cars running very low rear ride height and required for cars running a Watts link or Panhard conversion. Features shorter rear exit to suit de-bumpered cars. Straight through race silencers ensure maximum performance whilst being quiet enough to pass noise tests well under 99dB. Requires shortening of axle straps.

More InfoAsk a QuestionAdd to Quote

Gearbox Exhaust Bracket – Upper – Lightweight

Gearbox Exhaust Bracket – Upper – Lightweight

£40.00 GBP (ex vat)

Alfaholics production, laser cut and powder coated. Lightweight drilled version.

More InfoAsk a QuestionAdd to Quote

Gearbox Exhaust Bracket – Lower – Short – Lightweight

Gearbox Exhaust Bracket – Lower – Short – Lightweight

£25.00 GBP (ex vat)

Premium quality Alfaholics production, laser cut and powder coated. Shorter version for most RHD and late LHD cars – please check version required before ordering.

More InfoAsk a QuestionAdd to Quote

Gearbox Exhaust Bracket – Lower – Long – Lightweight

Gearbox Exhaust Bracket – Lower – Long – Lightweight

£25.00 GBP (ex vat)

Premium quality Alfaholics production, laser cut and powder coated. Longer version for LHD cable clutch cars with shape to clear brake master cylinder. Please check version required before ordering.

More InfoAsk a QuestionAdd to Quote