Clutches and clutch race parts for 101/750 Alfa Romeo

Alfaholics Full Race Clutch Kit – Cable Actuation

Alfaholics Full Race Clutch Kit – Cable Actuation

£1,395.00 GBP (ex vat)

RCE6001/CC6 | RCE6001/CC8

Extremely lightweight billet CNC machined flat flywheel manufactured from very high tensile EN24T steel. Weighs only 4.8 kgs including ring gear! AP Racing’s latest technology billet aluminium black anodised pressure plate weighing an amazing 1.2kgs, 4-paddle cera-metallic friction plate, premium quality round nose release bearing and bespoke Alfaholics manufactured billet machined aluminium release bearing carrier to adapt to fit directly to either Alfa Romeo hydraulic clutch fork and bell-housing or cable operated clutch – please specify when ordering.

We chose to use a single plate 4-paddle cera-metallic plate set up as it allows much more clutch pedal feel than a sintered friction material. Sintered materials cause the clutch pedal to feel like an on/off button, which is much too aggressive for historic tyres, as well as putting huge strains through the rest of the drivetrain and making the car difficult to drive in the wet! We have been using this cera-metallic paddle setup in all our competition cars for the past 15 years with 100% success and are much happier with its characteristics compared with the previous twin plate sintered setup used. We are even so happy with its driving characteristics that we have used it on high power trackday cars when the cars combine between road and competition use.

This kit comes complete and is ready to bolt directly to your Alfa Romeo. Flywheel available with 6 bolt crank fitment and 105T ring gear, or 8 bolt crank fitment with 105T ring gear and a special adaptor to fit the factory cable release bearing actuator.

Please note Mass Damper Flywheel upgrade only available in 8 Bolt 105 Tooth configuration.

Alfaholics Fast Road/Rally Clutch Kit – Cable Actuation

Alfaholics Fast Road/Rally Clutch Kit – Cable Actuation

£1,295.00 GBP (ex vat)

RALCC/6B | RALCC/8B

As used exclusively on all Alfaholics GTA-R builds, uses a special high performance organic friction material applied to a sprung drive plate centre. This kit combines the superb fast engine response only possible with a race style clutch, with the everyday driving practicalities of an OE fitment organic clutch. This kit has been developed specifically for our Alfa application for Alfaholics. We are thrilled with the results, it is the perfect balance for fast road/trackday cars and rally cars.

This kit comes complete and is ready to bolt directly to your Alfa Romeo. Flywheel available with 6 bolt crank fitment and 105T ring gear or 8 bolt crank fitment with 105T ring gear and a special adaptor to fit the factory cable release bearing actuator.V

Please note Mass Damper Flywheel upgrade only available in 8 Bolt 105 Tooth configuration.

Lightweight Steel Cable Clutch Flywheel

Lightweight Steel Cable Clutch Flywheel

£395.00 GBP (ex vat)

RCE6003/6/105 | RCE6003/8/105

As above but for cable clutch fitment. Available for both 6 bolt or 8 bolt crank fitment. Correct cable bell-housing sized 105T ring gear fitted for 8T starter.

“Last summer my Giulia Super had clutch problems, it broke down three times. Now the car is fitted with Alfaholics Lightweight Steel Cable Clutch Flywheel and the F&S clutch assembly. The flywheel is beautifully machined and with snug fit to the crank and the clutch. Now, after a 1600km the first week after putting all things together I got a different car to drive!” Fredrik Lavesson.