Rubber Seals and Rubber parts for 105 Series Coupe Alfa Romeo

Complete car seal kit to suit GT & GTV.

Order under bonnet grommets separately as these vary between models. Kit includes;-

• Front windscreen seal
• Rear screen seal
• Main door seals
• B-post seals
• Quarterlight main seals
• Quarterlight top seals 
• Quarterlight to door seals 
• Door bung set
• Front of door and a-pillar grommet set
• Door rain seals
• Door glass runner end seals
• Channels felts
• Window glass felts
• Window rubber hinge set
• Metal clips for the rubber hinges
• Rear side front edge seals
• Rear side window seals
• Boot & bonnet seal
• Outer door handle seals

Complete kit door and front window seal to suit GT & GTV.

Best quality front windscreen/windshield rubber seal for all 105 series GT, GTV, GTC and GTA.

Rear windscreen seal for all 105 series GT, GTV and GTA cars.

We stock the best quality soft & thin profile seals on the market and only use these seals on our own cars and customer car builds. Be aware of other seals on the market which are harder and/or thicker which result in poor door shutting.

Replacement door rubber channel set for retaining main door seals for all GTs, GTVs, GTAs & GTCs. Remade in anodised aluminium so they won’t rust away like the originals! Complete 10 piece full car set.

Fits into top s/s door finishers. Door window felt that fits all GTs, GTVs, GTCs & GTAs – Sections sold individually, 2 used per door.

Vertical door glass channel felt to fit the front of the glass in all GTs, GTVs, GTCs and GTAs. 2 required per car.

Fits into metal door channel bracket at back of door which the door glass runs inside. To fit the rear of the glass in all GTs, GTVs, GTCs and GTAs. 2 required per car.

GT Door glass channel – replacement for the rear channel which is often rusty. Priced per pair.

Rubber profile to fit into metal door channel bracket at back of door which the door glass runs inside. Both sides available.

Front quarterlight rubber seal to fit all 105 series GT/GTV/GTA & GTC. Both sides available.

Rubber profile to fit between front of quarterlight frame & door. Both side available.

Rubber profile to fit in top of the quarterlight frame. Both side available.

Front of door rain seal. Both sides available.

Door bungs for rear of door frame (set of 4).

Door alignment wedge/buffer.

Bonnet/hood stop for all Coupes and Spiders – Coupes use two per car, Spiders use six per car. Also can be used as the rubber stop for the bootlid on all Kammtail Spiders.

Seal for shut line between rear wing and back of door. 2 required per car.

B-pillar catch to suit GT and Guilia 1970 onward.

B Post metal bracket for the rubber seal to be fitted to the outer edge of the ‘B’ post. Both sides available.

Rear side quarter window seal to fit all 105 series GT, GTV, and GTAs. Two required per car, priced individually.

Rear side window front seal for all 105 Series GT & GTV models. Goes down the leading edge of the window glass where it fits into the B pillar. Two required per car.

Pair of rear side window vertical weather strip for Alfa GTC. This rubber can be trimmed shorter to suit glass fitment.

Replacement grommets for the often perished quarterlight rubbers. Sold as a set.

Set of 6 rubber hinge blocks for the rear side front window seal on all GTs, GTVs and GTAs.

Small metal clip for above rear side window hinge blocks on all models of 105 Series GT & GTV. 6 needed per car.

Replacement rubber seal for the leading edge of a Step-front bonnet.

For cars 1964-1967 with single piece rear of boot s/s finisher. Glues to bootlid.

For all cars 1968 onwards with 2 separate s/s finishers for rear of boot aperture. Correct thin profile.

(Part A in exploded diagram)

(Part C in exploded diagram) Alfaholics production – The firewall/bulkhead cable grommet for speedo/tacho and the choke cables for all RHD GTs/GTVs/Saloons, Spiders.

UK/Australia/Japan

Speedometer/tacho cable to suit left hand drive cars.

For late LHD cars with hanging pedals.

For all early left hand drive cars with floor pedals.

Round item to fit LHD hanging pedal cars.

Pedal surround bracket rubber seal to suit left-hand drive cars with a hanging pedal setup. fits between the pedal housing and the bodywork.

Two piece rubber grommet complete with bracket for the accelerator/throttle lever through where is passes through the bulkhead on all left hand drive cars.

Rubber grommet for the firewall to suit left hand drive Spiders (and possibly Coupes & Saloons) up to 1969. It is for the choke cable and hand throttle cable on these cars.

Wiring grommet to suit all 105 models.

(Part B in exploded diagram). Use 2 for step-fronts, 1 for late cars.

Grommet for where wiring passes through boot floor.

Special grommet for front chassis leg of 105 Series where copper brake pipe passes through into wheel arch.

Special convoluted grommet for upper heater hose fitting on all cars with early heaters – Sprint GT/V, step-front GTJ, Roundtail Spider and all Giulia Super.

(Part D in exploded diagram).

Sold per metre. Various applications including backing for Duetto centre heart and late Spider headlamp finishing rings.

Rubber foot for bonnet stay on early GT

GT bootlid hinge buffers that prevent the bootlid/trunk lid opening too far on your GT/GTV and damaging the bodywork. Note that some early Stepfront cars have four buffers fitted, while later cars use two located inside the ‘loop’ of the hinge. Priced individually.

(Part E in exploded diagram) For all models.

Bonnet seal for GT cars from 1968 onwards.

Mk2 1750 GTV & 2000 GTV.

Pedal rubber to suit all 105 series cars. It can be fitted to both the clutch and brake pedal.

Set of small rubber grommets to go between the latch mechanism and the glass on the rear side windows.

Plastic clip for fixing bonnet prop rod to the inner wing. For all late 105 GT, Spider, Berlina. MISC007/2

Floor bung to suit all 105 series cars. 8 Needed per car sold individually.

Pedal base rubber and metal surround to suit RHD cars.

Fuel filler neck seal to suit GT and Giulia Super.

Set of headlight wiring grommets to fit into the rear of the headlight bowl on all 105 series Spiders 1966-93 and all Step-front GTs.

They can also be used in the outer headlight bowls on some 1750 & 2000 GTVs, GT Juniors, and all Saloons. Grommet hole of approximately 22mm.