Panels and panel parts for 105 Series Spider Alfa Romeo

Upper Front Panel (Complete) – Roundtail
£395.00 GBP (ex vat)
PNL057/RT
New reproduction complete front panel to suit Roundtail Spiders 1966-69.

Upper Front Panel – Roundtail (1966-1969)
£200.00 GBP (ex vat)
PNL063/1
Repair section for nose of Spider 1966-1969.

Upper Front Panel – Kammtail
£180.00 GBP (ex vat)
PNL057
Reproduction upper front panel to suit European specification Kammtail (series 2) Spiders 1970-1982.

Upper Front Panel – S3
£150.00 GBP (ex vat)
PNL113
Reproduction upper front panel to suit S3 Spiders (1983-1989).

Upper Front Panel – S4 (1990-1993)
£175.00 GBP (ex vat)
PNL114
Reproduction upper front panel to suit S4 Spiders 1990-1993.

Lower Front Panel – Kammtail
£85.00 GBP (ex vat)
PNL058
Reproduction lower front panel to fit series 2 Kammtail Spiders 1070-1982.

Scuttle Panel – S3 / S4 Spider (1983-1993)
£135.00 GBP (ex vat)
PNL/8393SC
Replacement scuttle panel for S3 & S4 Spiders.
Covers the area in front of the screen.
You will need to use your old plastic vent cover to fit the new panel.

Front Valance – S3 (1985-1989)
£60.00 – £120.00 GBP (ex vat)
PNL058/1 | PNL058/2 | PNL058/1P
S3 spider lover valance/spoiler to suit cars 1985-1989.

Front Valance (Middle) – S3 (1985-1989)
£60.00 GBP (ex vat)
PNL058/3
Reproduction replacement front centre section for the spoiler/valance dam found on S3 Spiders from 1985-1989.

Radiator Cross Member (Early)
£120.00 GBP (ex vat)
PNL010/3
Fits all step-front GT, early Giulia Super and 1600 Duetto.

Radiator cross member (Late)
£78.00 GBP (ex vat)
PNL010
Non step-front GT crossmember – (under radiator) 1968-1989.

Bonnet Mounting Cross Member
£45.00 GBP (ex vat)
CRS/SPI
Radiator cross member for mounting the bonnet on all Spiders.
Models: All Spiders

Upper Rear Panel – Kammtail
£285.00 GBP (ex vat)
PNL059
Reproduction upper rear panel to suit series 2 Kammtail Spiders 1970-82. Pressed from original tooling.

Rear Valance (Outer) – Kammtail
£75.00 GBP (ex vat)
PNL060
Reproduction rear outer valance to suit Kammtail S2 Spiders (1970-1982).

Front Chassis Legs
£215.00 – £430.00 GBP (ex vat)
PNL010/4L | PNL010/4R | PNL010/4P
Rear section of front chassis leg from behind engine cross member to under floor box section. Complete unit with lower fillet.
This part is made for late Spiders but can be fitted to GT and other models with some adaptation. Please note that the left hand version is made for late deep floor cars only so for early cars with shallow left front floor pan, it is easier to adapt a right side part to fit the left side than it is to adapt the deep floor version to fit.

Transverse Chassis Frame
£105.00 – £210.00 GBP (ex vat)
PNL/CH1L | PNL/CH1R | PNL/CH1P
Transverse chassis frame leg.This fits across the car underneath the central floor and includes captive nuts for the transmission tunnel brace. Manufactured to fit all Spiders 1966-93, but can be easily modified to suit Saloons and Coupes as well.

Front Wing
£550.00 GBP (ex vat)
PNL053L | PNL053R
Pressed from the original tooling.
Models: Spider (1966-1982).

Front Wing – S3
£550.00 GBP (ex vat)
PNL053/S3L | PNL053/S3R
Reproduction front wing to fit Spider 1983-89.

Headlamp Support Panel
£58.00 – £116.00 GBP (ex vat)
PNL054R | PNL054L | PNL054P
Headlamp support panel to suit all Spiders.

Rear Wing – Kammtail
£595.00 GBP (ex vat)
PNL055R
Pressed from original tooling. To fit Spider 1970-82.

Front Wing Repair Section (No.1) – S1 & S2 (1966-1982)
£30.00 – £60.00 GBP (ex vat)
PNL067 | PNL067 | PNL068P
In front of front wheel – No.1.
To fit S1 & S2 Spider 1966-1982.

Front Wing Repair Section (No.2) – 1966-1993
£50.00 – £100.00 GBP (ex vat)
PNL070 | PNL069 | PNL070P
Behind front wheel – No.2. To fit all models – 1966-1993.

Rear Wing Repair Section (No.3)
£35.00 – £70.00 GBP (ex vat)
PNL071 | PNL072 | PNL072P
In front rear wheel – No.3.
To fit all models 1966-1993.

Rear Wing Repair Section (No.4) – Roundtail (1966-1969)
£95.00 – £190.00 GBP (ex vat)
PNL077L | PNL077R | PNL077P
Behind rear wheel. To Fit Spider 1966-1969.

Rear Wing Repair Section (No.4) – Kammtail
£30.00 GBP (ex vat)
PNL074
Behind rear wheel – No.4. To fit Spider 1970-82.

Shallow Front Floor Pan (Left)
£120.00 GBP (ex vat)
PNL033/1
With all original shaping.
To fit all RHD cars, and all LHD cars with floor hinged brake and clutch pedal.
Please note: Spiders made approximately after 1974 should have a deep left floor-pan so please check yours before ordering.

Deep Front Floor Pan (Left)
£120.00 GBP (ex vat)
PNL033
With all original pressings.
To fit LHD cars with hanging pedals only.

Front Floor Pan (Right)
£120.00 GBP (ex vat)
PNL034
With all original pressings.
To fit all models LHD & RHD.

Rear Floor Pan (Left) – Kammtail
£125.00 GBP (ex vat)
PNL096/1
Rear floor pan Kammtail Spiders 1970-1993.

Rear Floor Pan (Right) – Kammtail
£125.00 GBP (ex vat)
PNL096/2
Rear right hand side floor pan to suit Kammtail Spiders 1970-1993.

Rear Wheel Arch – 1966-1993
£45.00 – £90.00 GBP (ex vat)
PNL075 | PNL076 | PNL076P
To fit all Spider 1966-1993.
Handed – please specify which side required if not buying a pair.

Inner Rear Wheel Arch – Kammtail (1970-1993)
£150.00 – £300.00 GBP (ex vat)
PNL076/1 | PNL076/1R | PNL076/1P
Reproduction inner rear wheel arch.
To Fit all Spider 1970-1993.

Outer Sill – All Models
£42.00 – £84.00 GBP (ex vat)
PNL080L | PNL080R | PNL080P
Correct profile pressed from original tooling.
To Fit Spider 1966-93.

Middle Sill – All Models
£175.00 – £350.00 GBP (ex vat)
PNL081L | PNL081R | PNL081P
Correct profile pressed from original tooling.
To Fit Spider 1966-93.

Inner Sill – All Models
£165.00 – £330.00 GBP (ex vat)
PNL083 | PNL084 | PNL084P
Correct profile pressed from original tooling. To Fit Spider 1966-93. Handed, please specify which side required if not buying a pair.

Door Skin – Kammtail (1970-1993)
£220.00 – £440.00 GBP (ex vat)
PNL085/3L | PNL085/3R | PNL0853P
Outer door skin to suit all Kammtail Spiders (1970-1993).

Door Skin Repair Panels (1966-1993)
£130.00 GBP (ex vat)
SP-105-DSR
Pair of reproduction Spider lower door skin repair panels to suit all 105 series Spiders from 1966-1993.

Bonnet Hinge
£50.00 GBP (ex vat)
SPBOH1
A complete reproduction of the Spider bonnet hinge.
Priced individually.

Bootlid Frame Repair Section – Roundtail
£175.00 GBP (ex vat)
PNL065
Back 10″ – includes shaping & holes for no. plate lights and captive nuts. To fit Spider 1966-69

Boot Lid Lock Mechanism – Kammtail Spiders & Montreal
£45.00 GBP (ex vat)
PNL-SPI-BLL
Bootlid lock mechanism to suit Kammtail Spiders & Montreal.

Zender Rear Spoiler – S3
£280.00 GBP (ex vat)
ACC046
A lower profile production rather than the higher version seen on the original cars, giving the vehicle a better profile.
Complete set.

Chassis Leg Stiffening Kit
£275.00 GBP (ex vat)
MSC010
This kit greatly stiffens the front chassis legs on all 105/115 series Alfa models, which is a renowned weak point on the cars. When restoring body shells, we often observe cracked or squashed front chassis legs, and this no doubt contributes to the propensity of these cars cracking steering box cases. We developed this kit originally for our GTA-R and race car builds, but now install these on virtually all our restorations.
These plates are laser cut from the same T45 grade steel that we use in our rollcages, which has far stiffer properties than normal bodywork steel, thus greatly improving the rigidity of these plates. We pre-cut holes throughout the plate to ensure you can puddle weld the entire plate to the chassis leg for maximum rigidity. A must for any full restoration!

Front Splash Panel – 1966-1983
£35.00 – £70.00 GBP (ex vat)
PNL086L | PNL086R | PNL086P
Spider front splash panel to suit cars from 1966-1983.
They fit in front of front wheel to protect headlight.
Now made in aluminium to prevent them from rusting.

Splash Panel – Rear – All Models
£24.50 – £49.00 GBP (ex vat)
PNL088L | PNL088R | PNL088P
Spider front splash panel to suit cars from 1966-1983. They fit behind front wheel to protect headlight. Now made in aluminium to prevent them from rusting .

Front Anti Roll Bar Chassis Mount
£32.00 – £64.00 GBP (ex vat)
PNL010/2L | PNL010/2R | PNL010/2P
Chassis mounting panel for front anti-roll bar.

Top Arm Inner Mount Pod
£62.00 GBP (ex vat)
PNL010/1
Suspension top arm inner mounting frame – Two needed per car. this part is not handed.