Lights parts for 105 Series Coupe Alfa Romeo

7″ diameter headlight for step-front GT / Guilia & Spider.
Retained inside bowl by separate chrome ring. RHD version for UK, Australian, South African, Japanese market, etc.

7″ diameter headlight for step-front GT & Spider.
Retained inside bowl by separate chrome ring. LHD version for European, American market, etc.

7″ diameter H4 headlight.

Inner H1 headlight for all cars with 4 headlights.

Bulb plug and wiring for H4 headlight.

Reproduction stainless steel outer headlight ring for non-step front GT, GT Juniors, as well as 1750 Berlinas. This headlight ring has the ‘cutout’ to suit cars with the small headlight height adjustor levers on the bottom of the headlight bowl.

Reproduction stainless steel inner headlight ring to fit non-stepfront GTVs and GT Juniors. 

Outer finishing ring for body.

Special screw which locates ‘tongue’ for headlight and used to adjust beam position.

Reproduction headlight retaining ring.

To fit all non step-front Bertone GT with 4 headlights.

To fit outer headlights on all non step-front 105 GT.

Set of headlight wiring grommets to fit into the rear of the headlight bowl on all 105 series Spiders 1966-93 and all Step-front GTs.

They can also be used in the outer headlight bowls on some 1750 & 2000 GTVs, GT Juniors, and all Saloons. Grommet hole of approximately 22mm.

Nylon pull tag to fit the spring loaded headlight retaining clips. Sold individually.

A direct copy of the original Autodelta inner headlight mesh.

The Giulia saloon version will fit both the S1 Ti style grille and S2 Giulia Super headlight chrome surrounds.

Note these are to replace the headlight, they are not headlight covers.

For outer headlights on all cars with 4 headlights.

For inner headlights on all cars with 4 headlights.

Complete unit for all step-front cars.

Can be supplied with clear or orange indicator lenses.

Complete unit for all step-front cars.

Lens only for all step-front cars.

Lens only for all step-front cars. Available in either orange/clear or clear/clear.

White foam seal for side light lens on all step front GT

Indicator unit to body of car seal for all step front GT.

Lens only.

For 1750 S1.

Sidelight to bumper seals to fit 1750 GTV S1.

Sold as pair.

Complete unit.

For all non step-front cars except 1750 S1.

Complete unit.

For all non step-front cars except 1750 S1.

Lens only.

For all non step-front cars except 1750 S1.

Lens only.

For all non step-front cars except 1750 S1.

Available in either orange/clear or clear/clear.

Front sidelight seal to suit late GT

Complete indicator repeater / sidelight unit to fit all Step-Front GTs. Now produced with the original style Carello logo embossed on the lens.

Complete round type Carello branded indicator repeater with chrome trim. To suit later GT Juniors and GTVs, S2 Spiders, Berlinas and Montreals.

1750 GTV / All GT Junior Rear Light Unit.

Complete with backings, seals, screws, bulbs and reflector.

Can also be fitted to early Sprint GT or GT Veloce or S1 1750 GTV in place of the correct (unavailable) units.

For later “small light” cars.

Red/Red lens – US.

S2 1750 GTV and all GT Junior rear light- body.

Special screw for GT Junior rear light lens. Set of 4.

Reproduction rear light reflector to suit the early style rear light units / lenses with two backing studs for fitment.

Complete rear light unit, Altissimo.

Also fits USA S2 1750 GTV with big lights.

2000 GTV rear light lens only.

Also fits S2 1750 GTV USA Specification.

Small profile rear light rubber seals 1300-1750 GT, different version for special S1 1750 GTV rear lights also available.

Available to order as a single piece (left or right) or pair.

Special version for rear lights.

For early S1 1750 GTV

Carello reversing light. For all GT without integrated reverse lights in rear light unit. All GT Junior, Sprint GT, Sprint GTV, all 1750 GTV.  Now sold as a complete unit with the rubber mount.

Lens only for reversing light, Sprint GT, GT Junior, 1750 GTV

Mounting rubber for Carello reversing light.

Carello rear numberplate light for all cars with later thin style bumpers.

Rubber gasket to be fitted underneath the rear number plate light rubbers. Priced per pair.

Rear Numberplate Light – early.

Correct original Carello with Carello markings.

Two per car.

Black powder coated laser cut stainless steel.

Fits in bumper on all early GT & S1 1750 GTV

To fit 2000 GTVS, late GT junior and 2000 Berlinas

Correct version with plastic button, for door shuts and under bonnet light

H1 headlight bulb for inner headlights.

H4 headlight bulb.

Number plate light.

Indicator repeater & dash light bulb to suit 105 series cars.

Light bulb to suit courtesy light (GT & Guilia interior) & interior mirror (Spider).

Sidelight bulb to suit all 105 series cars.

Front & rear indicator bulb to suit all 105 series cars.

Interior warning light bulb.

Dash light bulb to suit S3 GT.