Exhausts and exhaust parts for 105 Series Saloon Alfa Romeo

Alfaholics Stainless Steel Sports Exhaust System

Alfaholics Stainless Steel Sports Exhaust System

£995.00 GBP (ex vat)

EXH038 | STA/EXH | STA/EXH

Superb quality, unrivalled on the market for quality, fit and performance! Primary & secondary lengths and bores optimised on the dyno. With this system fitted the engine will rev much freer with higher rev capability and in the region of 10BHP increase and 8lb/ft torque.

We have options to allow the direct fitment for all factory fit model variations of 105/115 Series cars; LHD (floor & hanging pedals, cable & hydraulic clutch) as well as RHD. We have centre link pipes & tailpipes to cover all model variations; GT, Giulia Saloon, Berlina, Roundtail Spider, Kammtail Spider, 1300 Junior Zagato and S3/S4 Spider.

Please follow the QR code on the centre section for a complete fitting guide for this system.

Notes:-

  • For LHD floor pedal cable clutch cars which have been upgraded to non-factory fit 1750/2000 engines, our 1750/2000 manifold will clash with your factory mechanism – you will need to modify your mechanism to factory GTA/TI Super specification to allow the manifold to clear.
  • For hanging pedal LHD 1600 cars, please order 1750/2000 shallow floor system for increased clearance to floor pan.
  • For RHD 2000 Spider post 1972, please order 2000 hanging pedal version of manifold as your car will have a deep left front floor pan.

Under axle upgrade

  • Cars that are lowered 2.5+ inches can encounter the rear axle touching the exhaust on full compression, to resolve this we have created  “under axle” centre and rear sections. For cars that are not lowered by 2.5+ inches should refrain from ticking the box.

 

Alfaholics customer John Dobson said the following about his recent purchase:- Many thanks for prompt despatch of the stainless-exhaust. It looks the business. Fitting has proved to be very straight forward and the first impression was of a freer revving engine especially higher up the range. I did a back to back test on the rolling road and was very pleasantly surprised to find that after a bit of carburretor rejetting there was an increase of almost 10BHP! Any more quick fixes like this would be much appreciated!

“Just wanted to let you know that the exhaust system went on beautifully. My mechanic, who works mainly on Ferraris and other italian exotics, told me it was it was the best after-market system he had ever seen. Thanks for making the effort to put great products on the market!”
Marc Hungerford, USA

Alfaholics Stainless Steel Sports Exhaust for TwinSpark Converted 105s

Alfaholics Stainless Steel Sports Exhaust for TwinSpark Converted 105s

£995.00 GBP (ex vat)

EXH038/1

Superb quality, unrivalled on the market! Primary & secondary lengths and bores optimised on the dyno. With this system fitted the engine will rev much freer with higher rev capability and in the region of 10BHP increase and 8lb/ft torque.

To suit all 105 models with hydraulically operated clutch, both LHD and RHD, hanging or standing pedals. Conversion for mechanically operated clutch cars reasonably simple.

3 different link pipes to suit the 3 chassis lengths of the different 105 series models. Different tailpipes made to fit all the different models perfectly; for Duetto, Kammtail, 1300 Junior Zagato and GT/Saloon. Comes complete with all brackets and clamps. Please specify model of car, pedal configuration and engine size when ordering.

Alfaholics Stainless Steel Sport Manifold

Alfaholics Stainless Steel Sport Manifold

£595.00 GBP (ex vat)

EXH039 | EXH039 | EXH039

Superb quality, unrivalled on the market for quality, fit, and performance! Primary & secondary lengths and bores optimised on the dyno. With this system fitted the engine will rev much freer with higher rev capability

For all 105/115 Series GT both LHD & RHD, cable & hydraulic clutch. Note – for late hanging pedal LHD 1600 cars, please order 1750/2000 shallow floor system for increased clearance to floor pan.

Alfaholics Stainless Steel Sport Manifold - Twinspark Engine Conversion

Alfaholics Stainless Steel Sport Manifold – Twinspark Engine Conversion

£595.00 GBP (ex vat)

EXM039/4 | EXM039/5

Superb quality, unrivalled on the market for quality, fit and performance! Primary & secondary lengths and bores optimised on the dyno. With this system fitted the engine will rev much freer with higher rev capability and in the region of 10BHP increase and 8lb/ft torque.

Alfaholics Stainless Steel Exhaust Fitting Set

Alfaholics Stainless Steel Exhaust Fitting Set

£49.95 GBP (ex vat)

EXH040/1

All the nuts, bolts, bushes, hangers and gaskets you’ll need to fit the Alfaholics Stainless Steel exhaust system to your car! For Nord engines

Alfaholics Stainless Steel Exhaust Fitting Set - Twinspark

Alfaholics Stainless Steel Exhaust Fitting Set – Twinspark

£54.95 GBP (ex vat)

EXH040/2

All the nuts, bolts, bushes, hangers and gaskets you’ll need to fit the Alfaholics Stainless Steel exhaust system to your car!

For Twinspark engines.

Middle Sections - All GT

Middle Sections – All GT

£62.00 GBP (ex vat)

EXH013

Standard production replacement middle exhaust section.

Standard Exhaust Fitting Kit

Standard Exhaust Fitting Kit

£25.00 GBP (ex vat)

EXH040/3

Standard exhaust fitting kit.

Head to manifold gasket

Head to manifold gasket

£1.75 GBP (ex vat)

EXH025

Manifold to downpipe gasket

Manifold to downpipe gasket

£1.20 GBP (ex vat)

EXH027

Tailpipe O-ring

Tailpipe O-ring

£3.00 GBP (ex vat)

EXH028

Manifold nut

Manifold nut

£0.98 GBP (ex vat)

EXH026

Manifold stud

Manifold stud

£1.50 GBP (ex vat)

EXH026/1

Rubber hanger for exhaust

Rubber hanger for exhaust

£2.95 GBP (ex vat)

EXH029

Exhaust Rubber Hanger Fitting Kit

Exhaust Rubber Hanger Fitting Kit

£7.50 GBP (ex vat)

EXH029/1

Pair of plates and sleeve for 1 fixing point. 4 kits needed for a car set.

Gearbox Exhaust Bracket – Upper

Gearbox Exhaust Bracket – Upper

£35.00 GBP (ex vat)

EXH032

Premium quality Alfaholics production, laser cut and powder coated.

Gear Exhaust Bracket - Lower - Short

Gear Exhaust Bracket – Lower – Short

£19.95 GBP (ex vat)

EXH034

Premium quality Alfaholics production, laser cut and powder coated. Shorter version for most RHD and late LHD cars – please check version required before ordering.

Gearbox Exhaust Bracket - Lower - Long

Gearbox Exhaust Bracket – Lower – Long

£19.95 GBP (ex vat)

EXH036

Premium quality Alfaholics production, laser cut and powder coated. Longer version for LHD Cable-clutch & LHD Hydraulic-clutch floor mounted pedal cars with shape to clear brake master cylinder.”

Rear Exhaust Heat Shield

Rear Exhaust Heat Shield

£48.00 GBP (ex vat)

EXH031/2

Rear exhaust heat protection plate.