Clutch Master Cylinder – Standing Pedals
£95.00 GBP (ex vat)
CLU001
Clutch master cylinder to fit all 105 Series cars with standing pedals - all hydraulic clutch right hand drive cars 1968-78 and left hand drive cars from 1968 to 1970.
Clutch Master Cylinder – Hanging Pedals
£72.00 GBP (ex vat)
CLU003/1
To fit all 105 series LHD hanging pedal cars & RHD Spiders after 1978 with hanging pedals. Reservoir sold separately.
Clutch Reservoir – Late
£42.00 GBP (ex vat)
CLU003/2
Reservoir to fit late LHD hanging pedal master cylinders only.
Clutch Slave Cylinder
£34.00 GBP (ex vat)
CLU004
Hydraulic clutch Slave cylinder to suit 105/115 series cars from 1968.
Clutch Slave Cylinder Retaining Clip
£1.50 GBP (ex vat)
CLU004/1
Clutch slave cylinder circlip for all hydraulically operated clutches. You will need two circlips per car.
Clutch Actuation Fork Retaining Spring
£4.50 GBP (ex vat)
CLU010/2
Sprint to retain actuation fork into bell housing. For all 105 Series with hydraulically operated clutch.
Cotter Pin – LHD Floor Pedal Cable Clutch
£7.95 GBP (ex vat)
CLU020
Replacement cotter pin for commonly damaged part – this fixes the clutch pivot arm to the mechanism on cable clutch operated LHD 105 series cars. Has to be removed every time to remove gearbox from car so often worn or damaged.
Clutch Pivot – LHD Hanging Pedals
£60.00 GBP (ex vat)
CLU101
Replacement mechanism for hanging pedal box
Clutch Flexi Hose
£7.95 GBP (ex vat)
CLU006
Flexible clutch hose for all 105 series cars with a hydraulically operated clutch.
Fichtel & Sachs Clutch Kit
£170.00 GBP (ex vat)
CLU008
Genuine original equipment 3 piece Fichtel & Sachs clutch kit -for cars with hydraulic operated clutch - all cars after 1967 & Spider up to 1993. Pressure plate, release bearing and friction plate included.
Clutch Friction Plate F&S
£60.00 GBP (ex vat)
CLU011
Original equipment Sachs clutch friction plate to fit all 105/115 Series cars from 1968.
Clutch Friction Plate F&S Sport – Hydraulic Operation
£385.00 GBP (ex vat)
RCE6004
F&S Sport clutch friction plate to fit hydraulic clutch cars. This version is suitable for fast road/trackday use and can be combined with the standard F&S pressure plate.
Hydraulic Clutch Release Bearing – F&S Type
£35.00 GBP (ex vat)
CLU010/F
Original equipment Fichtel & Sachs release bearing for cars with hydraulically operated clutch.
Hydraulic Clutch Release Bearing – Pattern
£15.00 GBP (ex vat)
CLU010
For cars with hydraulically operated clutch
Clutch Release Bearing Retaining Spring
£7.50 GBP (ex vat)
CLU010/1
For all hyraulically operated clutches - holds bearing onto actuation fork
Mechanical Clutch Release Bearing
£50.00 GBP (ex vat)
CLU014
Genuine F&S, with retaining springs, for cars with cable operated clutch
Clutch Release Bearing – Mechanical Repro
£30.00 GBP (ex vat)
CLU014/2
Reproduction mechanical/cable clutch release bearing to suit clutches on 750, 101 and early 105 series cars.
Mechanical Clutch Release Bearing Retaining Spring
£3.95 GBP (ex vat)
CLU014/1
Specific spring for locating an ORIGINAL cast style clutch release bearing unit into the actuating fork.
Mechanical Clutch Friction Plate
£42.00 GBP (ex vat)
CLU016
Aftermarket friction plate for cars with cable operated clutches
Mechanical Clutch Pressure Plate
£155.00 GBP (ex vat)
CLU017
Genuine F&S, for cars with cable operated clutch
Clutch Cable – LHD
£15.00 GBP (ex vat)
CLU019
LHD Mechanical clutch cable for cars with cable oeprated clutch. CLU019
Clutch Cable – RHD – Alfaholics Production
£39.00 GBP (ex vat)
CLU018
RHD Mechanical clutch cable for cars with cable operated clutch - Alfaholics production
Clutch Cover Housing
£40.00 GBP (ex vat)
CLUCOV
Clutch cover to be fitted on the gearbox bell housing. To suits all 105 series.