Sports Brake Disc Protection Plate Set
£285.00 GBP (ex vat)
Set of four reproduction vented brake disc backing plates to suit large front calipers. Made in Aluminium and powder coated in black.
- cat_race_parts_105: 105/115
- cat_std_parts_105_all: All 105/115 Series
- cat_brakes: Brakes
- filter_brake_discs_pads: Discs & Pads
- filter_book_mechanical_front_brakes: Front Brakes
- cat_race_parts: Race Parts
- filter_book_mechanical_rear_brakes: Rear Brakes
- cat_standard_parts: Standard Parts
£775.00 – £795.00 GBP (ex vat)
PACK002 | PACK004
Complete set of new brake calipers, sport grooved discs, Ferodo Ds2500 brake pads, fitting pins and braided steel brake flexi hoses for all 105/115 series Alfa Romeos from 1968. Available for both 1300/1600 ATE brakes with a 76mm front caliper bolt spacing or 1750/2000 ATE brakes with a 89mm front caliper bolt spacing.For our Alfaholics race and performance kits.
£2,220.00 GBP (ex vat)
New sports brake package for all 105/115 series cars, developed by Alfaholics in our workshops and tested on our cars to produce a high performance sports braking package suitable for fast road, rally and trackday use. The kit is compatible with your current brake master cylinder/servo setup meaning there is no need for any complex re-plumbing work to be carried out. The 4-pot front brakes give beautiful quality lightweight billet aluminium calipers with large pads & vented 280mm discs to keep brake temperatures under control under hard use, whilst the billet aluminium rear calipers with sports rear discs give improved performance and reduced weight over standard parts. The kit comes complete with braided flexible hoses for improved brake pedal travel and a bias limiting valve to fit in the rear brake line to ensure the front to rear bias can be set correctly. Kit supplied with Ferodo performance brake pads for fast road and trackday use with servo assisted brakes. Please choose from 1300/1600 (76mm) or 1750/2000 (89mm) dependant on your front upright caliper bolt spacing. Kit compatible for all cars with ‘late’ ATE brakes (1967/8 onwards) as standard which are identifiable by 1 piece uprights and front wheel studs fitted in the discs, not directly into the hubs.
£1,895.00 GBP (ex vat)
Exclusively designed and manufactured for Alfaholics, this kit represents the ultimate braking for extreme trackday & full race 105 series cars! It features lightened calipers, lightened mounting brackets and lightened disc mounting bells. The kit has been extensively tested with many road and track mile as a result they are now fitted to all the Alfaholics GTA-R 290 builds. The rotor is 20mm larger in diameter than our 4-pot kit, increasing the total surface area by 20%, and the width is increased by 8%. This results in even higher braking force, modulation and improved heat dissipation. During development we were not happy with the weight of normal off the shelf rotors in this larger size, so we had our own rotors designed and manufactured. The results are a 25% weight saving over similar off the shelf rotors and with further improved cooling characteristics. The caliper features 2 smaller leading pistons and a larger trailing piston; this ensures zero taper wear occurs when the elevated temperatures seen in racing leave the pads most susceptible to taper wear. By using 6 pistons per caliper we have been able to increase the pad surface area by 25% from that used in our 4-pot kit, this not only results in increased stopping power and longer pad life but also helps to control pad temperatures under full race conditions. The caliper has been designed to be as large as possible in certain critical areas to maximise rigidity and has been designed specifically to fit inside the Alfaholics 7×15” GTA wheel range (or larger). This kit, however, is not only for full race cars, it is also the ultimate solution for trackday cars looking for the very best in non-servoed braking. The Alfaholics 6-Pot GTA-R Superleggera brake kit is only compatible with non-original master cylinder systems with optimised bore diameters.
£475.00 GBP (ex vat)
LHD/FEKT | GTAR/PACK/FLR
3 race reservoirs, laser cut aluminium mounting bracket and a set of race quality stainless steel braided feed lines (with a black protective coating) to connect directly to race master cylinders, as used on our GTA-Rs. To be used in conjunction with our GTA-R brake package/dual circuit brake pedal box and our Girling clutch master cylinder conversion. Note: You will not need this kit if you have our hanging pedal brake box or brake package.