Badges (Coupe)

• Type: Reproduction “Alfa Romeo Milano” badge for grille or bootlid
• Models: 105 series cars up until 1972
• Material: Plastic
• Size: 55mm Diameter
• Fitment: Two pins
• Location: Front grille and boot lid.
• Quantity: Two badges required per car, priced individually.

As used in our workshop on all our GTA-R builds.

• Type: “Alfa Romeo Milano” badge for grille or boot lid.
• Models: All 750/101 series cars and 105 series cars pre-1972.
• Material: Premium quality enamel.
• Size: 55mm in diameter.
• Fitment: Two pins on the rear of the badge.
• Location: Front grille & rear boot lid.
• Quantity: Two bages required per car, priced individually.

• Type: Reproduction plastic “Alfa Romeo Non-Milano” badge.
• Models: all 105 series cars after 1972.
•  Material: Plastic.
• Size: 55mm Diameter.
• Fitment: Two fitting pins.
• Location: Front grille & rear boot lid.
• Quantity: Two badges required per car, priced individually.

• Type: Reproduction of the early style “disegno di Bertone” badge.
• Models: To suit Sprint GTs/GTVs, GT Junior 1966-70, and early 1750 GTV.
• Material: Aluminium.
• Size: 90mm in length.
• Fitment: Three fitting pins on the rear.
• Location: Fitted on the lower front wing (fender) on both sides.
• Quantity: Two scipts required per car, priced individually.

• Type: Reproduction late style “Disegno di Bertone” black with silver lettering.
• Models:  Introduced with the 1750 GTV and used until the 2000 GTV.
• Material: Plastic
• Size: 89mm in length.
• Fitment: Three fitting pins on the rear.
• Location: Cars should only have one badge fitted on the lower front wing (fender) on the right side of the car.

• Type: Beautifully made reproduction green cloverleaf symbol badge.
• Models: Sprint GTV.
• Material: Premium quality enamel.
• Size: 70mm in diameter.
• Fitment: Two pins.
• Location: ‘C’ pillar.

Note: The badges are handed to suit the left or right side of the car. Please select.

• Type: Beautiful reproduction enamel ‘C’ pillar gold cloverleaf badge.
• Models: 1750 GTV.
• Material: Premium enamel.
•  Size: 70mm Diameter.
• Fitment: Two pins.
•  Location: C Pillar.

Note: The badges are handed to suit the left or right side of the car. Please select.

• Type: Reproduction green serpent badge.
• Models: 2000 GTV.
• Material: Cast aluminium.
• Size: 70mm in diameter.
• Fitment: Two pins
• Location: C pillar.

Note: The serpent should point towards the rear of the car and the badges are handed to suit. Two required per car, priced individually.

• Type: Reproduction bootlid script.
•  Models: GT junior fitted with a 1300 engine (motor).
•  Material: Mirrored Stainless Steel.
•  Size: 240mm in length.
• Fitment: Three threaded pins.
• Location: Rear bootlid (trunk).

• Type: Reproduction bootlid script.
•  Models: GT junior fitted with a 1600 engine (motor).
•  Material: Mirrored Stainless Steel.
•  Size: 235mm in length.
• Fitment: Three threaded pins.
• Location: Rear bootlid (trunk).

• Type: Reproduction “Giulia Sprint GT” bootl lid script.
•  Models: Sprint GT & Sprint GTV.
•  Material: Mirrored Stainless Steel.
•  Size: 254mm in length.
• Fitment: Three threaded pins.
• Location: Rear bootlid (trunk).

Note, if you have a Sprint GTV you may also need the “Veloce” badge fitted to the rear panel, you can find this in the related products section.

• Type: Reproduction bootlid Giulia sprint GTA script.
•  Models: GTA.
•  Material: Mirrored Stainless Steel.
•  Size: 265mm in length.
• Fitment: Three threaded pins.
• Location: Rear bootlid (trunk).

Reproduction “Giulia GTC” Bootlid script.

• Type: Reproduction “1750” bootlid script.
•  Models: 1750 GTV & Roundtail Spiders.
•  Material: Mirrored Stainless Steel.
•  Size: 240mm in length.
• Fitment: Three threaded pins.
• Location: Rear bootlid (trunk).

• Type: Reproduction “2000” bootlid script.
•  Models: 2000 GTV.
•  Material: Mirrored Stainless Steel.
•  Size: 240mm in length.
• Fitment: Three threaded pins.
• Location: Rear bootlid (trunk).

• Type: Reproduction ” Veloce” script.
•  Models: 1600 Sprint Veloce.
•  Material: Mirrored Stainless Steel.
•  Size: 142mm in length.
• Fitment: Two threaded pins.
• Location: Rear bootlid (trunk).

• Type: Reproduction Retaining Clip.
•  Models: All 750/101 & 105 series cars.
•  Material: Plastic with a stainless steel pinch ring.
•  Size: 142mm in length.
• Fitment: Two threaded pins.
• Location: Rear bootlid (trunk).

• Type: Alfaholics large serpent sticker
• Models: GTA Junior.
• Material: Vinyl.
• Fitment: Self adhesive.
• Location: Normally found on the bonnet or wing.

We have two sizes available to order in white or green.

• 152mm x 88mm
• 265mm x 152mm

• Type: Alfaholics production “Quadrifolio” sticker set copied from originals.
•  Models: GTA.
•  Material: Vinyl.
•  Size: 150mm x 130mm
• Fitment: Self adhesive.
• Location: One on each wing with the stalk pointing to the rear of the car. One on the rear panel with stalk pointing right.

• Type: Alfaholics production of the traditional Autodelta sticker.
•  Models: GTA.
•  Material: Vinyl
•  Size: 78mm x 69mm.
• Fitment: Self adhesive.
• Location: Often seen on the step before the bonnet and also in front of the Quadrifoglio stickers on both wings.

Steering wheel badge available in gold or silver. Please select.

• Type: Premium quality Alfaholics production Autodelta badge. This badge has been copied directly from a good condition genuine Autodelta badge to ensure perfect accuracy.
•  Models: GTA.
•  Material: Premium enamel with a satin metal surface so it doesn’t look too flashy and particular attention has been paid to getting the fired enamel layout and lettering exactly correct.
•  Size: 77 x 66mm.
• Fitment: It features 2 mounting studs on the back, just as original.
• Location: Often fitted on the step before the bonnet and also in front of the Quadrifoglio stickers on both wings.

• Type: Reproduction Autodelta badge.
•  Models: GTA.
•  Material: Enamel.
•  Size: 77 x 66mm.
• Fitment: Self adhesive.
• Location:  Often fitted on the step before the bonnet and also in front of the Quadrifoglio stickers on both wings.

• Type: Alfaholics production of the 1600 “running in sticker” as the original.
•  Models: All 105 series cars with 1600 engines (motors).
•  Material: Vinyl.
•  Size: 197mm x 73mm.
• Fitment: Self adhesive.
• Location: Windscreen.
• Language: Italian.

• Type: Alfaholics production of the 1600 “running in sticker” as the original.
•  Models: All 105 series cars with 1600 engines (motors).
•  Material: Vinyl.
•  Size: 197mm x 73mm.
• Fitment: Self adhesive.
• Location: Windscreen.
• Language: English.

• Type: Alfaholics production under bonnet lubricant sticker, copied from original.
•  Models: Step front GT, Roundtail Spider, Mk1 1750 GTV.
•  Material: Vinyl.
•  Size: 150mm x 129mm.
• Fitment: Self adhesive.
• Location: Under Bonnet
• Language: Italian/English.

• Type: Alfaholics production under bonnet lubricant sticker, copied from an original.
•  Models: Mk2 1750 GTV, 2000 GTV & 2000 Spider.
•  Material: Vinyl.
•  Size: 150mm x 129mm.
• Fitment: Self adhesive.
• Location: Under Bonnet
• Language: Italian/English.

• Type: Alfaholics production copied from an original.
•  Models: 105 series cars from 1962-67.
•  Material: Vinyl.
•  Size: 145mm x 30mm.
• Fitment: Self adhesive.
• Location: Fuse box mounted in the engine bay.

• Type: Alfaholics production copied from an original.
•  Models: All 105 series cars, can be fitted to 750/101 too for a period look.
•  Material: Vinyl.
•  Size: 160mm x 80mm.
• Fitment: Self adhesive.
• Location: Side of battery (engine bay).

• Type: Alfaholics production of the original Michelin tyre pressure sticker.
•  Models: All 105 series cars.
•  Material: Vinyl.
•  Size: 110 x 57mm.
• Fitment: Self adhesive.
• Location: Windscreen next to the running in the sticker.

• Type: Alfaholics production of the GTA Bendix fuel pump sticker, copied from the original.
•  Models: GTA
•  Material: Vinyl.
•  Size: 87 x 57mm.
• Fitment: Self adhesive.
• Location: Fitted to the fuel pump.

• Type: Alfaholics website script sticker.
•  Models: Not model specific.
•  Material: Vinyl.
•  Size: Small – 210mm, medium – 310mm & Large – 425mm
• Fitment: Self adhesive.

• Type: Alfaholics production of the early style radiator sticker.
•  Models: Step front GT, Sprint GTV,  Mk1 1750 GTV, Roundtail Spiders and TI Super.
•  Material: Vinyl.
•  Size: 45 x 33mm.
• Fitment: Self adhesive.
• Location: Radiator.
• Language: As original in Italian with English on the bottom.

• Type: Alfaholics production of the late style radiator cap
•  Models: Mk2 1750GTV, 2000 GTV & 2000 Spiders.
•  Material: Vinyl.
•  Size: 46 x 46mm.
• Fitment: Self adhesive.
• Location: Fitted to the late style square radiator cap.
• Language: As original in Italian & English.

• Type: Alfaholics production of the gearbox oil warning sticker copied from an original.
•  Models: All 105 series cars.
•  Material: Vinyl.
•  Size: 53 x 30mm.
• Fitment: Self adhesive.
• Location: Found near the filler plug on all gearboxes.
• Language: As original in Italian & English.

The perfect way to finish your new Alfaholics GTA wheels!

• Type: Alfaholics production, perfect copy of original Campagnolo sticker fitted to GTA wheels.
•  Models: GTA
•  Material: Vinyl.
• Fitment: Self adhesive.
• Location: Fitted to GTA wheels.
• Language: Italian.