Alfaholics Sports Brake Package – Stage 2

£2,220.00 GBP (ex vat)

PACK005 | PACK005/20

Add to Quote

Upgrade Options

  • GTA-R Superleggera Rear Brake Disc & Carrier Kit

Product Information

Sports brake package for all 105 / 115 series cars, developed by Alfaholics in our workshops and tested on our cars to produce a high-performance sports braking package suitable for fast road, rally, and track day use.

The kit is compatible with your current brake master cylinder and servo setup meaning there is no need for any complex re-plumbing work to be carried out. The 4-pot front brakes give beautiful quality lightweight billet aluminium calipers with large pads & vented 280mm discs to keep brake temperatures under control under hard use, whilst the billet aluminium rear calipers with sports rear discs give improved performance and reduced weight over standard parts.

The kit comes complete with braided flexible hoses for improved brake pedal travel and a bias limiting valve to fit in the rear brake line to ensure the front to rear bias can be set correctly. Kit supplied with Ferodo performance brake pads for fast road and track day use with servo-assisted brakes.

Choose from:
• 1300 / 1600 (76mm)
• 1750/2000 (89mm)
Depending on your front upright caliper bolt spacing.

Kit compatible for all cars with ‘late’ ATE brakes (1967/1968 onwards) as standard which is identifiable by the one-piece uprights and front-wheel studs fitted in the discs, not directly into the hubs.

What’s Included

  • 2x Alfaholics Superleggera design 4-pot calipers
  • 2x Grooved & vented front brake rotors
  • 2x Lightweight disc bells
  • 2x Caliper brackets to suit 1600 or 2000 bolt spacing
  • DS2500 or DS3000 front & rear brake pads (please specify in notes when ordering)
  • 2x Grooved & vented rear brake rotors
  • Pair of billet aluminium rear calipers (Superleggera)
  • Braided steel brake flexi set
  • Braided banjo caliper line set
  • 1x Screw type brake proportioning valve
  • 1x Bolt kit including bolts, lock nuts, washers and hydraulic fittings

Technical Details

ModelsAll 105 series with late ATE brakes and single piece uprights
Material6082 T6 aluminium (Calipers, bells and brackets)
Weight1726g (each caliper)
740g (each bell)
300g (each 2000 bracket)
222g (each 1600 bracket)
4.2kg (each front rotors)
FeaturesAdjustable valve designed to fit in the brake line and allows a reduction in brake pressure of up to 57% with a simple twist of a knob.
Fitment (adjustable valve)The inlet / outlet ports are 1/8 NPT.

Adaptors are supplied to enable a 3/16 copper brake pipe with a 3/8 UNF male fitting to be used.
Brake hoses PTFE lined braided brake hoses with zinc plated fittings & a clear coat shield
Package Weight 27.1kg
Weight Saving 23.4% Over our stage 1 package