Alfaholics GTA-R 290

Alfaholics GTA-R 290

A unique opportunity to buy a top specification, very low mileage GTA-R 290. Featuring a carbon fibre bonnet, boot lid, doors and wings in conjunction with titanium wishbones, a lightweight T45 rollcage and lightweight bucket seats this is one of the lightest GTA-R 290s we have built to date.

Having covered just 573 miles from new, the car presents beautifully throughout and is supplied freshly serviced ready for road and track use.

Worldwide export can be arranged.

£SOLD

240bhp @ 7,000rpm

Alfa Romeo Twin Spark engine, aluminium block built with bespoke designed 94mm long stroke crankshaft, steel connecting rods, forged oversize pistons and race bearings. CNC ported aluminium cylinder head with race quality valve gear, DLC cam followers and crackle black finished billet aluminium cam cover.

Motec M1

Motec’s latest M1 ECU management system with 1000Hz processor speed, fully sequential fuel and ignition firing, wideband lambda control, 200Hz knock control and 120Mb datalogging.

Cooling

Bespoke aluminium fabricated cooling system with taper flow top tanks, motorsport grade water and oil cooler cores incorporating ECU controlled cooling fans.

gta_r_024_01

gta_r_024_02

gta_r_024_04

Gearbox

GTA close ratio gearbox with drilled and scalloped gears, rifle drilled layshaft, billet selector rods and forks, billet quick shift kit and redesigned synchro profiles for improved gear shift feel and speed. Superfinished internals to minimise friction.

alfaholics_close_ratio_gear_kit_02

quickshift_kit_01

Axle

Steel axle tubes with plate type limited slip differential, improved pinion bearing design, super finished final drive gear set, rifle drilled billet halfshafts.

limited_slip_differential_02

gta_r_024_03

GTA-R 290 Ultraleggera Titanium Suspension

The ultimate evolution of our GTA-R suspension design achieving an impressive 34kg weight saving over the original setup. Fully optimised geometry together with minimal unsprung weight to deliver the ultimate driving experience whilst retaining the legendary 105 series character and feel.

Lightweight spring conversion with adjustable ride height

2 1/4″ spring conversion with adjustable platforms front and rear saves a huge 12kg whilst allowing fine ride height adjustment for the perfect chassis setup.

full-race-2-14-small-spring-kit-2048x1365

lower_wishbone_01-2048x1365

Titanium front wishbones

Lower wishbones CNC machined from billet titanium featuring spherical bearings for superior accuracy of geometry under high cornering loadings. Upper wishbones fabricated from tubular titanium resulting in a further 6kg weight reduction.

Billet GTA-R ‘Widebody’ uprights and hubs

CNC machined billet uprights with modified pick up positions to optimise dynamic geometry and uprated spindle design to eradicate pad “knock back”. These uprights have been specifically designed for use with widebody cars running 8″ wheels to modify the KPI angle and therefore correct the scrub radius to match a narrow body car for optimised steering feel and weight, a real must have for any widebody build. Together with titanium wheel hubs and titanium wheel studs and nuts, a considerable saving of 3kg of unsprung and rotational weight.

front_upright_set_01

t_bar_01

Aluminium T-bar

Aluminium T-bar features redesigned chassis mount bushes and spherical bearing axle location for improved traction and further weight saving.

Double adjustable aluminium gas dampers

Developed by Alfaholics at the Nurburgring, these aluminium bodied double adjustable dampers provide exceptional body control and ride refinement with separate bump and rebound adjustment for the perfect setup on both road and track.

trailing_arm_cropped_02

gta_r_024_05

6-pot-superleggera-brake-kit

Brakes

Billet aerospace grade aluminium calipers. 6 piston front with 300mm vented rotors, 2 piston rear with 267mm solid rotors.

Aluminium dual circuit non-assisted pedal box for maximum pedal feel and adjustable bias front to rear.

gta_r_024_06

Interior

Bespoke track focused leather interior hand crafted to suit owner’s desires with petrol blue feature stitching throughout. Fully insulated using Dynamat for optimum heat protection and noise damping.

Leather trimmed ‘Recaro Race’ seats with custom weave

FIA motorsport seats with outstanding comfort and support, trimmed in the finest quality italian leather & woven linen to suit the customer’s vision.

Full Track Rollcage

Lightweight 12-point roll cage for greatly increased rigidity and safety, features harness and door bars. Trimmed in Alcantara and “basketball” stitched by hand in contrast petrol blue thread.

gta_r_024_07

gta_r_024_08

airvent_small_02

Dashboard

Finished in high quality crackle black and Alcantara for unparalleled aesthetics and anti glare properties. Elegant aluminium air vents bespoke designed to complement the original Alfa Romeo instruments.

Carpets

Tailored in the finest English Wilton wool and bound in leather for the ultimate in luxury.

lhd_floor_pedal_set_01

Controls

Momo Prototipo steering wheel, as fitted in period to GTA Corsas by Autodelta, trimmed in alcantara with contrast petrol blue feature stitching.

Lightweight adjustable pedals machined from billet aerospace aluminium.

Billet aluminium door openers & winder handles

gta_r_024_09

gta_r_024_10

gta_r_024_17 (1)

Exterior

Wheels and tyres

Alfaholics designed lightweight alloy 8×15″ GTAm wheels finished in custom copper gold colour and fitted with Yokoham 205/50 tyres and retained with titanium wheel nuts and studs.

Glass

Lightweight heated windscreen, lightweight 4mm side glass and polycarbonate rear screen save an impressive 11kg.

Luggage

Tailored leather and woven linen luggage set.

×

Where prices are shown in any currency other than GBP sterling, please note that such prices are only indicative and are intended as a guide. You will always be quoted and charged in GBP sterling.

×Back to Search Results
Loading...
×
loading...