Wheels
Prices are exclusive of VAT.
 | Alfaholics GTA Strada 6x14 Manufactured in the UK exclusively for Alfaholics, ET33. Superb quality and extremely light. Wheel supplied with centre cap and circlip. | Price: £115 |
 | Alfaholics GTA Corsa 7x14 Manufactured in the UK exclusively for Alfaholics. Superb quality and lightweight. Not to be confused with other products on the market! ET24 allows clearance of steering ball joint on all 105 Series models, but this prevents use on early GT with deep rear arch or any Saloon model. For those looking for a fast road/trackday/non-FIA race wheel, we strongly recommend fitting our new 7x15" GTA Veloce wheel instead. Our new Veloce wheel is lighter than our 7x14" GTA wheel at a mere 7.3kg, quality is superior from our new factory, it is stronger, fully TUV approved and the range of tyres available is far greater and more secure than in 14" diameter. | Price: £125 |
 | Alfaholics GTA Corsa 7x14 ET29 Manufactured in the UK exclusively for Alfaholics. Same as Alfaholics GTA Corsa wheels, but machined to the correct GTA offset (ET29) and with steel stud inserts to cope with the regular removal required by racing. For fitment with correct GTA uprights only, or with 5mm spacers on the front of any 105. | Price: £135 |
 | Alfaholics GTA Veloce 7X15 NOW IN STOCK! Alfaholics is proud to announce production of the ultimate GTA style aluminium wheel, exclusively for Alfaholics in a brand new state of the art factory! Over the last few years we have seen the gradual withdrawal of performance 14” tyres from the market, only to be superseded by a tyre that is unavailable in 14 inch. Firstly, the Yokohama A520, then the superb Bridgestone Potenza RE 720, quickly followed by Yokohama’s A539. This trend will only continue with performance tyres around the world becoming harder and harder to source. This will realistically limit 14” wheels to non-performance cars for there is little point in spending good money upgrading the suspension, engine and brakes of your 105 series car, if you cannot transmit the capabilities of these products to the road properly! With this in mind, a seed started growing some while ago at Alfaholics to produce a 7x15” lightweight aluminium GTA wheel. A huge amount of time, effort and research has gone into the design of this wheel. It had to fit the widest range of 105s, after all, we know that all models are used as performance cars, not just GTs after 1967 which have the easiest rear wheel fitment. Full size resin models were made so that we could perfect the visual appearance of the scaled up 7x14” Alfaholics GTA Corsa wheel. It was essential to keep all the character of this wheel when designing the new 7x15” version. The picture you are looking at is the final 3-D rendered computer drawing of the wheel and shows exactly how it will look. Stunning! We further knew that weight was an important issue. We had a fight on our hands to make such a solid wheel of this size sufficiently light, when its target market is performance and racing clients. We finally triumphed and are delighted to announce that the wheel is just 7.3kgs (16.5lbs)! This has been achieved by incorporating small ribs in the back of the wheel, very much like the original sixies design, that allowed the wheel to be made thinner in cross-section. The beauty of this thin cross section is that it has aided the visual appearance of the wheel, by making the holes look less thick. Being 15” diameter removes all steering ball joint clearance issues on the front of normal 105’s without GTA type steering arms, which has allowed us to produce the wheel to Alfa’s original design offset of ET29. We realised, however, that this would remain a problem on the back of lowered pre ‘68 GT’s (with deep rear arches), as well as all saloon models. Accordingly, we have incorporated into the design, the ability to make the wheel to ET35. Thus, there are two different offsets available. This will ensure the VELOCE wheel fits ALL models. Suggested tyre sizes are either 195/60 R15, (195/55 R15 for those wishing to gear their car back slightly), or 205/50 R15 for race application. The wheel will be TUV approved for the German market and to illustrate its overall strength and integrity. The wheel is manufactured in the latest state of the art UK wheel factory which already supplies OE wheels to Aston Martin, Lotus & Bentley. Quality is like no other previously seen in the classic car aftermarket wheel world! Wheel supplied with centre cap and circlip. | Price: £140 |
 | Alfaholics GTA Veloce 7x15 Superleggera Heat treated race version of our GTA Veloce wheel weighing a mere 6.7kg! Features steel stud inserts to maximise durability due to the regular removal required by racing. As fitted on the Alfaholics 2.0 Sprint GT Racer. ET29 & ET35 fitment available. | Price: £150 |
 | Alfaholics GTA Veloce 7x15 Over the past 6 months, we have conducted a test of all the major tyre manufacturer's options of performance road tyres they offer for our new 7x15" GTA Veloce wheel. We found a clear winner which combined the highest lateral grip, with superb directional stability and first rate ride quality. The Michelin PE2 is offered in a choice of 195/55 or 205/50 sizes. For fast road and trackday use, we recommend 195/55 as it ensures maximum steering feel with quite superb grip levels. This package is offered with free fitment, dynamic balancing with stick on weights and pure nitrogen gas inflation , far superior to natural air. These tyres are available fitted to both ET29 & ET35 standard and Superleggera wheels from stock. | Price: £85 extra per w |
 | Alfaholics GTA Veloce 7x15 98 PCD 98 PCD version of the Alfaholics GTA Veloce wheel to fit all Alfasud & 4-bolt 116 series. ET29 only. | Price: £140 |
 | Forged Steel Racing Wheel Nut 19mm forged steel wheel nut featuring open end to comply with racing regulations. RH thread only. | Price: £2.75 each |