GTA Body Parts

GTA Lexan Plastic Door Glass

£35.00 (ex VAT)

Correct 5mm lexan plastic GTA door glass

More Info...Ask a QuestionAdd to quote

GTA Lexan Plastic Rear Side Window

£35.00 (ex VAT)

Correct 5mm lexan plastic GTA rear side window. 4mm Also available for racing.

More Info...Ask a QuestionAdd to quote

GTA Perspex Rear Screen

£160.00 (ex VAT)

As fitted to the Autodelta team cars and available from the Autodelta parts catalogue.

More Info...Ask a QuestionAdd to quote

Autodelta GTA/GTAm Sliding Window Kit

£325.00 each (ex VAT)

Alfaholics manufactured premium quality kit, featuring not only an aluminium outer frame but also an aluminium slider frame to give the correct Autodelta look. The slider sits on special foam rubber blocks ensuring that the sliding window has a smooth action and cannot move when the car is in motion. The kit comes complete with a pair of CNC machined aluminium knobs for opening the slider, a pair of finishers for the top of the door on the outside & inside, captive blocks for fixing the aluminium frame into the door frame and stainless steel button head bolts for all […]

More Info...Ask a QuestionAdd to quote

Alfaholics GTA Mesh Grille Kit

£240.00 (ex VAT)

Brand new production exclusive to Alfaholics, unrivalled quality! Manufactured using a perfect original grille kit on one of our 1600 GTAs as a template. This is the first kit from our new production which is manufactured along side factory grilles for Bentley & Spyker using identical methods to these motor manufacturers! The unique manufacturing methods employed not only allow for a much finer stainless steel edge beading, as original, but also result in perfectly accurate curvature top and bottom. The lower grilles are also a direct copy of an original, enabling these grilles to be fitted to original GTAs using […]

More Info...Ask a QuestionAdd to quote

doorbutton

Alfaholics GTA Door Buttons

£295.00 pair (ex VAT)

Our first production of GTA door buttons several years ago was a huge success, since customers were delighted with the fact that they fitted perfectly, unlike the sub-standard Italian reproduction item which is still commonly available on the market. The problem was that we could not source enough Alfa lock mechanisms to satisfy demand! We therefore went back to the drawing board and designed a new button from scratch, which would use a high quality modern type of barrel lock. The button (with flat as original) and the body is CNC machined from aircraft grade aluminium to maintain tight tolerances […]

More Info...Ask a QuestionAdd to quote

GTA Hoop Door Handle

£30.00 each (ex VAT)

Stunning reproduction of the aluminium GTA hoop door handle – Alfaholics production.

More Info...Ask a QuestionAdd to quote

Type

GTA Type ID Plate

£45.00 (ex VAT)

Alfaholics production, aluminium type plate with exactly correct design, font and sizing as original design. Available for – 1600 GTA – LHD 1600 GTA – RHD 1300 GTA Junior – LHD

More Info...Ask a QuestionAdd to quote

Alfaholics GTA Aluminium Bonnet

£2500.00 (ex VAT)

Brand new production, exclusive to Alfaholics and made to the very highest standards.  We laser-scanned a new old stock steel step front bonnet to enable us to CNC machine a solid resin tool for pressing the aluminium frame to ensure perfect accuracy. The skin is precision hand wheeled and then fitted to the frame which features all the factory pressings and captives. By making the skin and the frame from aluminium, the bonnet is very light. A race version is also available with swage-punched holes in the frame for additional weight saving.

More Info...Ask a QuestionAdd to quote

GTA Aluminium Bootlid

£495.00 (ex VAT)

Pressed item, good quality with correct frame design.

More Info...Ask a QuestionAdd to quote

Alfaholics GTA Roof Skin

£2500.00 (ex VAT)

Brand new production exclusive to Alfaholics using our superb aluminium panel factory. Perfect quality and fit featuring drip rail and screen recess details. Aluminium A & C pillar production currently under progress to join this roof to our wings.

More Info...Ask a QuestionAdd to quote

autodeltarollhoops

Autodelta Rollhoop

£650.00 (ex VAT)

Premium quality Alfaholics production, copied from our Autodelta GTA AR613102. This cage is a perfect copy of the Autodelta cage, so ideal for any person trying to restore a GTA to period competition specification. It’s very neat and simple design means that it is also the perfect cage to use on any 105 series coupes to add protection whilst retaining full use of the rear seat. The low connection point for the backstays to the main hoop means that very little of the cage is visible from the outside, meaning this is a very subtle installation. Comes complete with special fixing brackets for mounting to the underside of the car to fix the cage in place.

More Info...Ask a QuestionAdd to quote

apillar

Aluminium A-pillar

£350.00 Pair (ex VAT)

New production of Aluminium a-pillar skin for GTA, to go with our roof skin. Exclusive to Alfaholics using our superb aluminium panel factory.

More Info...Ask a QuestionAdd to quote

cpillar

Aluminium C-pillar

£360.00 Pair (ex VAT)

New production of Aluminium C-pillar skin for GTA, to go with our roof skin. Exclusive to Alfaholics using our superb aluminium panel factory.

More Info...Ask a QuestionAdd to quote

Alfaholics 1300/1600 GTA Aluminium Front Wing

£1250.00 (ex VAT)

Brand new production exclusive to Alfaholics, unrivalled quality! We recently bought an unrestored 1600 GTA with perfect bodywork from a private collection and used this unique opportunity to make a new production of front and rear GTA wings. Working exclusively with the official prototyping factory for Aston Martin, Bentley & Spyker, moulds were taken directly from all 4 wings on this GTA to create perfect resin bucks from which to manufacture the wings. This is the same process that is used to make runs of prototype cars and small runs of production cars for Aston Martin, Bentley & Spyker where […]

More Info...Ask a QuestionAdd to quote

Alfaholics GTA Aluminium Rear Wing

£1250.00 (ex VAT)

These wings are available in either the correct deep rear arch height for 1600 GTA & Sprint GT or the later shallow 1300 GTA & later GT versions. Please specify which version is required when ordering. Brand new production exclusive to Alfaholics, unrivalled quality! We recently bought an unrestored 1600 GTA with perfect bodywork from a private collection and used this unique opportunity to make a new production of front and rear GTA wings. Working exclusively with the official prototyping factory for Aston Martin, Bentley & Spyker, moulds were taken directly from all 4 wings on this GTA to create […]

More Info...Ask a QuestionAdd to quote

GTA Aluminium Front Panel

£760.00 (ex VAT)

Pressed item, good quality.

More Info...Ask a QuestionAdd to quote

GTA Aluminium Rear Panel

£395.00 (ex VAT)

Pressed item, good quality.

More Info...Ask a QuestionAdd to quote

Reverse Light Blanker

£35.00 (ex VAT)

Lightweight blanker for reverse light for rear panel.

More Info...Ask a QuestionAdd to quote

GTA Aluminium Rear Panel Inner Support

£350.00 (ex VAT)

Premium quality Alfaholics production

More Info...Ask a QuestionAdd to quote

GTA Aluminium Base of Rear Screen Panel

£750.00 (ex VAT)

Premium quality Alfaholics production.

More Info...Ask a QuestionAdd to quote

1600 GTA Aluminium Spare Wheel Well

£975.00 (ex VAT)

Premium quality Alfaholics production. Correct shallow version spare wheel well without flat by inner wheel arch to match original 1600 GTA part.

More Info...Ask a QuestionAdd to quote

Aluminium Spare Wheel Well – Race Version

£975.00 (ex VAT)

Deep wheel well as per 1300 GTA but with dome removed from bottom. Useful to race cars where dome not required to carry spare wheel and especially useful for LHD cars wishing to mount a fuel cell into the spare wheel area.

More Info...Ask a QuestionAdd to quote

1967 Homologation GTA Blister Arches

£325.00 pair (ex VAT)

New Alfaholics production, premium quality pressing. These are a direct copy of the arches Autodelta had homologated for the 1967 season to give increased clearance at the rear of GTAs with 7″ wheels fitted. We used an original set of arches we had from Richard’s ex-Chiti GTA to make this production to ensure a faithful replication was possible. These can be fitted to both early deep arch GT as well later shallow arch GT. Fitting these allows the rear track to be increased by 10-15mm per side.

More Info...Ask a QuestionAdd to quote

1969 Homologation GTA Arch Extension Set

£275 set (ex VAT)

Premium quality Alfaholics production. These fibreglass arches have been made from a set of original Autodelta moulds that Richard Banks acquired over 20 years ago, which we recently discovered in our Devon warehouse! These arches can be found under the part number 105.59.54.109.00/110.00 and are listed under the 1969 homologation sheets for the 1300 GTA and under the 1970 homologation sheets for the 1600 GTA. Fitting these arches provides a very simple, neat and attractive way of fitting GTAm type wheels, such as our new Alfaholics 8×15″ GTAm wheel.

More Info...Ask a QuestionAdd to quote

1300 GTA Group 2 GRP Wing Set – Road

£400.00 (ex VAT)

Premium quality Alfaholics production to fit all step-front GT. We have made these arches due to the poor quality of other productions on the market. Having spend a huge number of hours shaping, filling and preparing a set of those arches fitted to a car to get it ready for paint, we decided to take moulds directly off the car to preserve all this work for future builds and of course to enable us to supply a high quality set of arches to customers. This orad weight set are finished in white gel coat and are strong whilst also being […]

More Info...Ask a QuestionAdd to quote

1300 GTA Group 2 GRP Wing Set – Race Version

£595.00 (ex VAT)

As per above arches, but made using a special 3 ply woven GRP material. Not only does this make the arches lighter (1KG lighter per set), but the woven fabric is much more resilient to impact and will often just dent (which can be popped out by hand), rather than tearing as with traditional fibreglass materials.

More Info...Ask a QuestionAdd to quote

GTA Rear Numberplate Light Plinthe

£49.50 (ex VAT)

Copied directly from Richard Banks\’ 1600 GTA, this plinthe is an exact copy with perfect dimensions. (Lights not included)

More Info...Ask a QuestionAdd to quote

GTAm Sidelight/Indicator Unit

£80.00 (ex VAT)

Correct unit as fitted on Autodelta GTAm.

More Info...Ask a QuestionAdd to quote

1300 GTA Sticker Kit

£65.00 set (ex VAT)

100% accurate copy of original 1300 GTA sticker set. Stunning quality & lazer cut. Kit comprises, bonnet serpent, side cloverleafs, side stripes and bootlid script. Available in white or green. Other colours available to special order.

More Info...Ask a QuestionAdd to quote

1600 GTA Quadrifoglio Sticker

£3.95 each (ex VAT)

Correct copy of original sticker, green on white triangular laser cut background, Alfaholics production. Both left & right versions available.

More Info...Ask a QuestionAdd to quote

Autodelta Enamel Badge – Alfaholics Production

£60.00 (ex VAT)

Premium quality Alfaholics production! This badge has been copied directly from a good condition genuine Autodelta badge to ensure perfect accuracy. It features a nice satin metal surface so it doesn’t look too flashy and particular attention has been paid to getting the fired enamel layout and lettering exactly correct. It features 2 mounting studs on the back, just as original.

More Info...Ask a QuestionAdd to quote

Autodelta Enamel Badge – Stick On

£35.00 (ex VAT)

Stick on reproduction Autodelta enamel badge. Manufactured with 3M adhesive tape so no holes need drilling to fit.

More Info...Ask a QuestionAdd to quote

Autodelta Sticker

£2.25 (ex VAT)

Correct version of Autodelta sticker, as fitted to later works GTAs.

More Info...Ask a QuestionAdd to quote