Zagato-R – 019

Zagato-R

019

Our first Zagato-R build is completed and ready to hand over to Gordon Murray! We are very proud to have built one of our R-types for Gordon – not only does he have the most exacting standards, but he is also a true enthusiast & petrolhead and has been keen to push the boundaries with this build. The finished car is truly wonderful, both in its looks and the way it drives. The goal was to create a grown-up Grand Touring car with the highest level of performance combined with superb ride quality, a full suite of creature comforts and trimmed to the very highest standards to make the car practical.

230bhp @ 7,000rpm

Alfa Romeo Twin Spark engine, aluminium block built with bespoke designed 94mm long stroke crankshaft, steel connecting rods, forged oversize pistons and race bearings. CNC ported aluminium cylinder head with race quality valve gear, DLC cam followers and crackle black finished billet aluminium cam cover.

Motec M1

Motec’s latest M1 ECU management system with 1000Hz processor speed, fully sequential fuel and ignition firing, wideband lambda control, 200Hz knock control and 120Mb datalogging.

Cooling

Bespoke aluminium fabricated cooling system with taper flow top tanks, motorsport grade water and oil cooler cores incorporating ECU controlled cooling fans.

gta_r_019_01

gta_r_019_02

gta_r_019_03

Gearbox

GTA close ratio gearbox with drilled and scalloped gears, rifle drilled layshaft, billet quick shift kit and redesigned synchro profiles for improved gear shift feel and speed. Superfinished internals to minimise friction.

gearbox_rebuild_service_01-02

gearbox_rebuild_service_03

Axle

Steel axle tubes with plate type limited slip differential, improved pinion bearing design, super finished final drive gear set, rifle drilled billet halfshafts.

limited_slip_differential_02

halfshaft-2

gta_r_019_04

GTA-R 290 Suspension

Fully optimised geometry together with minimal unsprung weight to deliver the ultimate driving experience whilst retaining the legendary 105 series character and feel.

Lightweight spring conversion with adjustable ride height

2 1/4″ spring conversion with adjustable platforms front and rear saves a huge 12kg whilst allowing fine ride height adjustment for the perfect chassis setup.

full-race-2-14-small-spring-kit-2048x1365

tubular_top_wishbone_kit_01

Titanium upper wishbones

Upper wishbones fabricated from tubular titanium resulting in a 6kg weight reduction.

Billet GTA-R uprights and hubs

CNC machined billet uprights with modified pick up positions to optimise dynamic geometry and uprated spindle design to eradicate pad “knock back”. Together with titanium wheel hubs and titanium wheel studs and nuts, a considerable saving of 3kg of unsprung and rotational weight.

front_upright_set_01

aluminium_t_bar_01

Aluminium T-bar

Aluminium T-bar features redesigned chassis mount bushes and spherical bearing axle location for improved traction and further weight saving.

Double adjustable aluminium gas dampers

Developed by Alfaholics at the Nurburgring, these aluminium bodied double adjustable dampers provide exceptional body control and ride refinement with separate bump and rebound adjustment for the perfect setup on both road and track.

trailing_arm_cropped_02

gta_r_019_05

6-pot-superleggera-brake-kit

Brakes

Billet aerospace grade aluminium calipers. 6 piston front with 300mm vented rotors, 2 piston rear with 267mm solid rotors.

Aluminium dual circuit non-assisted pedal box for maximum pedal feel and adjustable bias front to rear.

gta_r_019_06

Interior

Bespoke leather interior hand crafted to suit Gordan Murry’s vision. Fully insulated using Dynamat for optimum heat protection and noise damping.

Leather trimmed ‘Sport Road’ seats with custom stitching

Classic design seats with outstanding comfort and support, trimmed in the finest quality Italian leather, diamond stitch detail throughout.

Air-conditioning

Highly efficient modern air-conditioning system integrated neatly behind the dashboard delivering icy cold air in even the hottest climates.

gta_r_019_08

gta_r_019_09

air_vent

Dashboard

Finished in fine Italian leather and Alcantara for unparalleled aesthetics and anti glare properties. Elegant aluminium air vents bespoke designed to complement the original Alfa Romeo instruments.

Carpets

Tailored in the finest English Wilton wool and bound in leather for the ultimate in luxury.

Controls

Momo Prototipo steering wheel, as fitted in period to GTA Corsas by Autodelta.

Lightweight adjustable pedals machined from billet aerospace aluminium.

Billet aluminium door openers & winder handles

gta_r_019_10

gta_r_019_12

gta_r_019_11

Exterior

Wheels and tyres

Alfaholics designed lightweight alloy 7×15″ wheels finished in GTA-R smoke grey, and fitted with Michelin 195/60 tyres and retained with titanium wheel nuts and studs.

Glass

Lightweight heated windscreen, new Alfaholics manufactured Junior Zagato side glass.

Luggage

Tailored leather and alcantara luggage set with diamond stitched detail to complement interior trim detailing.

gta_r_019_13