Fuel System
Prices are exclusive of VAT.
 | Facet Red Top Electric Fuel Pump Works Specification, for naturally aspirated engines fitted with carburettors. Premium quality, 35 gallon/hr pumping capacity, 6.5-7.25 psi. For up to 200+ bhp fast road or racing engines. Kit includes- pump, elbow joints, rubber shock mount bushes, earth wire and spare filter. Fit the Best! (Fit with fuel pressure regulator/ filter assembly below) | Price: £81 |
 | Fuel Pressure Regulator & Filter The ultimate fuel pressure regulator. This integrated fuel pressure regulator and fuel filter features a removable pressure gauge enabling accurate fuel pressure metering. It features an aluminium bowl for increased safety and filters the fuel without restriction. Gauge removal recommended when pressure set. Kit includes filter unit, gauge and mounting bolts. | Price: £54 |
 | Stainless Steel Braided Fuel Line Kit Premium quality 3 piece fuel line kit bespoke made for Alfaholics. Fits from fuel line on chassis leg to fuel pressure regulator/filter unit, from filter unit up to front carburettor and front carburettor to rear carburettor. | Price: £49.95 |
 | 25 Litre Sprint Race Fuel Tank Made exclusively for Alfaholics with superb design and manufacture. This 25 litre tank fits is the spare wheel well of all 105 series and 116 series cars, featuring a domed base. This makes it superb for LHD cars to even out the weight distribution in the car, allowing it to be corner weighted with far greater precision. | Price: £355 |
 | Alfaholics 55 Litre Rally/Trackday Fuel Tank Superb new design! Foam filled aluminium tank. Made exclusively for Alfaholics to the highest standard of design and manufacture. Fits centrally between shock absorber mounts for optimum weight distribution and safety. By designing the fuel tank with the collector pot on the left, it allows the spare wheel well to be used, making it perfect for rally and trackday cars. This has the added advantage of allowing you to use the bottom half of an original fuel tank to mount your fuel pump and battery if boot mounted. This mean all exposed parts can be separated away from tools, bags, helmets and other items you want to store in the boot. It also greatly improves the under floor air flow. We have noticed from our own race car that just blanking off the old fuel tank hole creates a trap for air passing under the car that not only slows the car but also deforms the shape of the back panel over time. The manufacture of this fuel tank has been born from customer request, especially in rallying, and also from problems we have encountered on Max's GTA Replica after 3 years of fast driving. The originally perfect boot floor had flexed so much from up to 50kg of fuel tank trying to lift up and down, that it ended up stress cracking the boot floor, requiring significant weld repair. It is fitted with a VDO fitment ring allowing a VDO sender to be fitted. Supplied complete with remote filler and pipe. Additional Options VDO dip pipe sender - £50 VDO Gauge - £35 | Price: £475 |
 | Alfaholics 57 Litre Race Fuel Tank Fully foam filled aluminium tank perfect for 1 hour racing. Made exclusively for Alfaholics to the highest standard of design and manufacture. Not to be confused with other items available. Fits centrally between shock absorber mounts for best weight distribution through out the race and safety. Identical to above tank but without spare wheel wheel cut out and right hand collector for the spare wheel well side. This then allows an extra large rear silencer to be fitted for certain race cars where noise levels are critical. Supplied complete with remote filler and pipe. | Price: £450 |
 | Alfaholics 100 Litre FIA Approved Fuel Safety Cell 100 litre fully foam filled safety cell, designed and manufactured exclusively for Alfaholics. Approved to FIA FT3-1999 Standard. This cell was designed using 3D CAD software to completely map the inside boot area of a 105 series Alfa Romeo coupe. This then allowed us to design the cell to sit in the boot floor, shelf and spare wheel area with the tightest fit. It also allowed the layout and shape to be optimised for weight distribution and practicality whilst remaining in the constraints of the volume of the cell and the shape of ther boot area. The tank sits centrally between the shock absorber turrets, keeping the weight central and as far forward as possible, whilst bringing the tank back onto the boot floor and down into 1/4 of the spare wheel well, helped to keep the weight as low as possible too. It comes complete with a separate laser cut aluminium cover for safety, extra location and to comply with race regulations. The cell comes complete with foam, internal collectors and plumbings which lead to the dash-6 fuel outlet, internal baffles with twin check valves, aero filler cap and aluminium cover. This cell is extremely lightweight so if you compete in shorter distance races as well as endurance races you are not carrying excess weight. This tank was first used in the 6 Hours of Spa where we won the Eau Rouge Tropy, the cars handling was as crisp with 100 litres of fuel as it was with 15 litres at the end of each session. The careful thought that went into the positioning of the tank was crucial in helping us win as it allowed us to push so hard right from the start of each session with over 85kgs of fuel in the boot. Price: £2250, including laser cut aluminium cover, internal fuel pump, plumbing & wiring Additional Options Integrated fuel sender compete with dash mounted gauge - £140 Lockable filler cap - £20 | Price: £2250 |