Alfa Romeo Fuel and Carburettor System

Fuel tank – GT

For GT 1300/1600/1750cc – FUL001/1 		Price:
£165.00
(ex VAT)

Fuel tank – 2000 GTV

For 2000 GTV – FUL001/2 		Price:
£165.00
(ex VAT)

Fuel tank – 2000 Spider

For 2000 Spider – FUL001 		Price:
£130.00
(ex VAT)

Fuel tank – Spider Fuel Injection

For Spiders running electronic fuel injection – FUL001/3 		Price:
£155.00
(ex VAT)

Fuel Tank – Duetto

Fuel tank for Duetto Spider – FUL001/6 		Price:
£170.00
(ex VAT)

Fuel Tank Seal

Seal for mounting fuel tank into boot floor 		Price:
£7.25
(ex VAT)

Fuel tank sender – 1300/1600/1750cc

For Jaeger or Veglia gauges - please specify 		Price:
£45.00
(ex VAT)

Fuel tank sender – 2000

For 2000 GTV & 2000 Spider 		Price:
£37.00
(ex VAT)

Fuel tank sender – Spider fuel injection

For Spiders running electronic fuel injection 		Price:
£39.00
(ex VAT)

Locking fuel cap

Bayonet version for 1300/1600 & 1750cc. Screw on version for 2000 GTV & Spider. Please specify. Larger diameter thread for S4 Spider screw on cap is not available 		Price:
£10.00
(ex VAT)

Fuel flap spring

For GT and Saloon only 		Price:
£4.00
(ex VAT)

Fuel flap rivet

for GT & Saloon only 		Price:
£3.00
(ex VAT)

Fuel pump

Mechanical fuel pump for all 101/105/115 & 116 engines 		Price:
£18.50
(ex VAT)

Fuel pump plastic spacer

Sits between fuel pump and block 		Price:
£4.75
(ex VAT)

Fuel Pump Blanking Plate

Alfaholics production, laser cut blanking plate for blanking off block when using an electric fuel pump 		Price:
£14.95
(ex VAT)

S4 fuel pump

Electric in line fuel pump for Bosch Motronic cars 		Price:
£90.00
(ex VAT)

S4 Spider Fuel Pump

‘In Tank’ fuel pump for S4 Spider – fits on sender 		Price:
£79.00
(ex VAT)

Fuel Pump Mounting Rubber – pair

Used in S4 Spider and Alfa Romeo 75 fuel pump mounts.  Sold as a pair. 		Price:
£5.00
(ex VAT)

Fuel filter

Small version for cars 1963-75. Large version for cars 1975 – start of fuel injection 		Price:
£4.50
(ex VAT)

Fuel filter assembly – Filter King

Standard version with pressure adjuster screw 		Price:
£55.00
(ex VAT)

S3 and S4 spider injection fuel filter

In line fuel filter for Bosch Motronic cars 		Price:
£12.50
(ex VAT)

Carburettor rubber mounts – 40mm

Original quality. We advise fitting instead our aluminium carburettor mounts featured lower in this list, as they are a more durable solution and never need replacing again. 		Price:
Double mount £32.00 each Single mount £14.50 each
(ex VAT)

Carburettor Rubber Mounts – 40mm – S3 Spider/Alfetta

Different version for some late inlet manifolds where fixed on with nuts rather than studs. On some S3, 1600 S4, and Alfetta 		Price:
£23.95 each
(ex VAT)

Carburettor rubber mounts – 45mm

Original quality. We advise fitting instead our aluminium carburettor mounts featured lower in this list, as they are a more durable solution and never need replacing again. 		Price:
£39.95 each
(ex VAT)

Alfaholics aluminium carburettor mounts

Alfaholics production - top quality CNC machined from billet aluminium. Over time, the original rubber mounts crack and leak air causing the mixture to weaken and consequently the engine to run roughly. Even the replacement reproduction rubber mounts have been known to crack prematurely and this has led us to manufacture these superb billet aluminium items for use as a direct replacement. They use premium quality rubber ‘O’ rings to form a perfect seal between the mount and the carburettor. These rubber ‘O’ rings, together with thackery washers (included in the kit), provide each carburettor with the necessary damping from engineMore... 		Price:
£99.00 set
(ex VAT)

Alfaholics aluminium carburettor mounts – long sport version

As above but with 40mm increased inlet tract length for improved mid range torque and maximum power. These items are ported as standard for 45mm carburettors and use a separate bonded rubber Misab ‘O’ ring plate and as a result allow porting for up to 48mm carburettors. The kit is supplied complete with studs pre-fitted in the mounts, Misab ‘O’ ring plates, thackery washers and nyloc nuts. All Alfaholics road and racing engines are now supplied fitted with aluminium carburettor mounts as standard. Also now available for 40mm carbs. Upgrade from thackery washers to rubber buffers with metal cup washersMore... 		Price:
£150.00 set
(ex VAT)

Carburettor gasket

Paper gaskets for each side of carb mounts. 8 needed for rubber gaskets, 4 needed when using our aluminium carb mounts. 		Price:
£0.30
(ex VAT)

Inlet manifold gasket

Carburettor engine version for all 101, 105, 115 & 116 engines 		Price:
£4.25
(ex VAT)

Inlet manifold gasket – Injection

For Bosch motronic engines, e.g. late S3 and all S4 Spider 		Price:
£6.00
(ex VAT)

Airbox Clamp

Clamp for late 105.48 style cylindrical air filter housing 		Price:
£15.50
(ex VAT)

Pipercross Performance Air Filter

Pipercross performance air filter replacement. Exclusive Alfaholics production in collaboration with Pipercross. This filter is an upgrade for the standard 105.48 air filter fitted to all 1968-1982 105 series cars. It fits directly into the standard airbox, improving airflow and therefore performance. 		Price:
£34.95
(ex VAT)

Pipercross Single Filter

One piece filter for both carbs with backing plate. 		Price:
£80.00
(ex VAT)

Pipercross Constant Radius Ram Pipes

Recommended for use with Pipercross single filter, priced per set of 4. As used on Max’s GTA Replica. 		Price:
£64.00
(ex VAT)

Weber 45mm Rampipes

For Weber 45mm carburettors only.  Slot in.  Aluminium 26mm long. FUL031/1 		Price:
£80.00 set of 4
(ex VAT)

Mesh Ram Pipe Covers

Mesh covers to fit Weber Ram Pipes – please note that they do not fit Pipercross version 		Price:
£59.00 set of 4
(ex VAT)

GTA type curved trumpets

90 degree trumpets as per original GTA.  Supplied with aluminium mounting plate. 		Price:
£275.00 set
(ex VAT)

Pipercross ram pipe socks

Perfect for use with GTA 90 degree curved trumpets. Priced per pair for 1 carburettor. 		Price:
£19.95
(ex VAT)

Carburettor rebuild kits

Weber, Dell’Orto and Solex available. All Weber kits the same for 40 and 45mm, All Dell’Orto kits the same, 3 different versions of Solex available – brass fitting in main diaphragm changes. Sold per pair for 2 carbs. 		Price:
from £22.50 per pair
(ex VAT)

Weber 45 DCOE Carburettor

Jetted well as a base point for 2.0 engines.  Price per carburettor. 		Price:
£295.00 each
(ex VAT)

Weber 40DCOE carburettor

Brand new, price per carburettor 		Price:
£295.00 each
(ex VAT)

Weber Carburettor Jet Cover

Genuine Weber Part, not cheap repro! 		Price:
£8.75
(ex VAT)

Gasket for Jet Cover

FUL012/4 		Price:
£0.99
(ex VAT)

Fuel Inlet for 40/45mm Carburettor

T-Piece fuel inlet for 40/45mm Carburettor – FUL012.5 		Price:
£9.95
(ex VAT)

Adjustable throttle rod

Adjustable length metal rod allows you to adjust for full throttle actuation! Replaces usually poor condition and bendy standard plastic item.  Requires metal ball fitting ends which available separately. 		Price:
£14.95
(ex VAT)

Throttle rod end – metal

Metal end complete with internal circlips, for use as an option with adjustable throttle rod 		Price:
£2.95
(ex VAT)

Small Throttle Linkage Ball

 Price:
£1.50
(ex VAT)

Accelerator mounting rubber

Mounts mechanism to firewall 		Price:
£2.50
(ex VAT)

Accelerator bush

Fits in the end of throttle actuation arm – ball fits through centre for long throttle rod to attach to. 		Price:
£3.95
(ex VAT)

Carburettor stay bush

Bush to fit in bottom of steady bar where it fits into engine mounting 		Price:
£4.00
(ex VAT)

Accelerator pedal

Correct more shaped version for all 105/115 models – be aware of cheaper incorrect straighter version on the market which results in an inability to get full throttle! 		Price:
£32.99
(ex VAT)

Carburettor airflow tester

Ideal for balancing carburettors – high quality unit, as used by Alfaholics 		Price:
Unit £38.50 - Rubber adaptor, £12.50
(ex VAT)

Choke and throttle cable

Choke and hand throttle cable 		Price:
£4.95
(ex VAT)

Spider choke cable

Complete with knob fitted – flat version as per S3 – early domed knob version for S2 not available – have to use this type 		Price:
£14.00
(ex VAT)